On 07/24/2012 09:58 AM, Matthias G. Eckermann wrote:
Hello all,
after having successfully booted my EfikaMX with a Kernel 2.6.31 based openSUSE build, I wanted to move on to the most recent stuff, and used:
LimeJeOS-openSUSE-12.2-ARM-efika.armv7l-1.12.2-Build6.1.raw.xz which I yesterday got from: http://download.opensuse.org/repositories/openSUSE:/Factory:/ARM/images/
Ignoring Graphics, there is only one real issue with this: the 3.4.4.3 kernel does not initialize the RTC device (/dev/rtc0), thus the system boots up on 1970-01-01. Looking into the Kernel configuration, there is no obvious option missing. Any ideas?
I had a look at the source code for it. There is a driver for the mc13xxx which is in there and it's enabled in our config. However, since you don't get a device, it apparently doesn't work properly. I guess the next step would be to throw debug printk's in the probing code and see if a) it gets executed at all b) if so, where it fails Alex -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org