Am 10.02.2015 um 21:19 schrieb Richard (MQ):
On 10/02/15 14:55, Jim McDonough wrote:
On 02/04/2015 07:28 AM, Kai Dupke wrote:
On 01/29/2015 08:55 AM, Richard MQ wrote:
Is this a working image file?
For me, the boot process hangs at "Loading kernel" (no progress after several minutes)
I'll give this a try and report back.
I'm not Richard, but openSUSE-Factory-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build266.3.raw.xz hangs after loading kernel message with my Pi, too.
OpenWRT works, so the Pi should be OK. Works fine on mine, but it is not a B+, just a B.
Thanks Jim,
Mine's also a B - it's more-or-less the same as the top left image in http://raspi.tv/2014/the-raspberry-pi-family.
Please can I confirm (because my original posting has been cut in this sub-thread, and I think there was a typo in teh line quoted above from Kai Dupke) that you have had success on yours with:
openSUSE-13.2-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build36.2.raw.xz md5sum: f61450a3eb30ff5419463d153271fe0c
This is the only recent image I have been able to locate from a source that I can trust.
Hi, Richard. With the OS-Version Build36.2 as you mentionned above, I had no problems to put it on a stick. Monitor was a HDMI-type- Also "firstboot" executed correctly. With YAST I configured root-PW. language, keyboard. After a reboot I used YAST2 again in order to configure the static IP etc, as I was familiar wirh the "standard" OS-Versions since 20 years. Further infos I found in the paper "HCL:Raspberry Pi". Also I installed my favorite Midnight-Commander. Open problems (my be others to come in the future): 1. Unable to open X-Window 2. could not adjust a standard FBAS-Terminal, as I offen intend to use a 7"-Monitor in text-mode (with debian-squeeze configuration was done in "/boot/conf.txt) 3. When closing with "poweroff" or "shutdown -h now" system restarted. Wish you all the best and good luck Edgar, DJ3PU, Munich -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org