Op woensdag 10 januari 2018 13:26:53 CET schreef Freek de Kruijf:
I used two images from repository: http://download.opensuse.org/ports/aarch64/tumbleweed/images/ namely: openSUSE-Tumbleweed-ARM-JeOS-raspberrypi2.armv7l-2017.12.14-Build1.9.raw.xz openSUSE-Tumbleweed-ARM-JeOS-raspberrypi2.armv7l-2017.12.14-Build1.10.raw.xz
The first one comes up properly. However "fdisk -l /dev/mmcblk0" shows: Disk /dev/mmcblk0: 7,5 GiB, 8068792320 bytes, 15759360 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: FDA566EC-2187-40A0-8357-DCB2E5B6F63D
Device Start End Sectors Size Type /dev/mmcblk0p1 2048 411651 409604 200M Linux filesystem /dev/mmcblk0p2 413696 839683 425988 208M Linux filesystem /dev/mmcblk0p3 841728 14747670 13905943 6,6G Linux filesystem /dev/mmcblk0p4 14749696 15759326 1009631 493M Linux filesystem
Strangely, "lsblk" shows: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT mmcblk0 179:0 0 14,9G 0 disk ├─mmcblk0p1 179:1 0 200M 0 part /boot/efi ├─mmcblk0p2 179:2 0 14,2G 0 part / └─mmcblk0p3 179:3 0 485,7M 0 part [SWAP]
While "parted -l" shows this: Model: SD 00000 (sd/mmc) Disk /dev/mmcblk0: 16,0GB Sector size (logical/physical): 512B/512B Partition Table: gpt Disk Flags:
Number Start End Size File system Name Flags 1 1049kB 211MB 210MB fat16 vcboot 2 212MB 413MB 201MB ext4 lxboot legacy_boot 3 414MB 15,5GB 15,1GB lxroot 4 15,5GB 16,0GB 516MB linux-swap(v1) lxswap
After the first boot the system behaves as if it has only three partitions, so like lsblk shows.
However a reboot of this system shows an error message from script /boot/boot.scr about accessing something outside limits, I assume outside the second partition, and starts to try to boot from the network.
The second image shows in the first boot lots of errors trying to start services. A reboot shows the same behavior as the first image.
It looks like these images are not properly formatting the micro-SD card, and leave a corrupt ext4 partion on this card.
I filed a bug report about this: https://bugzilla.opensuse.org/show_bug.cgi?id=1075094
I also tried the RPi2 image for Leap 42.3 from repository: http://download.opensuse.org/ports/armv7hl/distribution/leap/42.3/appliances... image: openSUSE-Leap42.3-ARM-${OS}-raspberrypi2.armv7l-2017.07.26-Build1.1.raw.xz which shows the same behavior. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org