Hi, dtb-rpi3-aarch64 is massively outdated and should not be used. Either the one integrated into u-boot (https://github.com/openSUSE/u-boot/pull/1) or a recent dtb-aarch64 must be used. The one in u-boot got reverted by Andreas. (In fact, the PR has the DT from the TW kernel, so no wifi either) To get WLAN to work, all following conditions must be met: - sdhci-iproc not in initrd (blacklisted in /etc/dracut.conf.d/*) - DT maps WiFi SDIO to bcm2835-sdhci/-iproc controller - DT maps MMC to bcm2835-sdhost controller - Firmware installed Cheers, Fabian Am Donnerstag, 13. Oktober 2016, 10:37:53 CEST schrieb Guillaume Gardet:
Hi,
On devel:ARM:Factory:Contrib:RaspberryPi3 project, there are currently 2 DTB packages: * dtb-aarch64 : compiled broadcom DTBs from sources and output a bcm2837-rpi-3-b.dtb file too. * dtb-rpi3-aarch64 : pre-compiled bcm2837-rpi-3-b.dtb (from where?)
Current JeOS uses the pre-compiled DT.
WiFi is not working on AArch64 version, and I am wondering if it could be caused by the DTB used.
Alex, Andreas, any idea?
Guillaume
-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org