Am Freitag, 14. Oktober 2016, 17:36:14 CEST schrieb Fabian Vogt:
Hi,
dtb-rpi3-aarch64 is massively outdated and should not be used. Either the one integrated into u-boot (https://github.com/openSUSE/u-boot/pull/1) or a recent dtb-aarch64 must be used. The one in u-boot got reverted by Andreas. (In fact, the PR has the DT from the TW kernel, so no wifi either)
I have to correct this, I just looked at the wrong commit. Everything needed is in the PR. So u-boot with this PR un-reverted would work.
To get WLAN to work, all following conditions must be met:
- sdhci-iproc not in initrd (blacklisted in /etc/dracut.conf.d/*) - DT maps WiFi SDIO to bcm2835-sdhci/-iproc controller - DT maps MMC to bcm2835-sdhost controller - Firmware installed
Cheers, Fabian
Am Donnerstag, 13. Oktober 2016, 10:37:53 CEST schrieb Guillaume Gardet:
Hi,
On devel:ARM:Factory:Contrib:RaspberryPi3 project, there are currently 2 DTB packages: * dtb-aarch64 : compiled broadcom DTBs from sources and output a bcm2837-rpi-3-b.dtb file too. * dtb-rpi3-aarch64 : pre-compiled bcm2837-rpi-3-b.dtb (from where?)
Current JeOS uses the pre-compiled DT.
WiFi is not working on AArch64 version, and I am wondering if it could be caused by the DTB used.
Alex, Andreas, any idea?
Guillaume
-- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org