Hi I bought a new printer HP Laser Jet 1020 but unable to configure it under SuSe 10. Yast is not showing any entry for HP Laser Jet 1020 but , 1015 and 1022. None of them worked. I also downloaded driver from http://foo2zjs.rkkda.com/ but it also did not worked. Is there any way to make it work under SuSe 10. Ohh I got the following error from dmesg usb 1-8: USB disconnect, address 8 usb 1-8: new high speed USB device using ehci_hcd and address 9 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17 drivers/usb/class/usblp.c: usblp0: failed reading printer status SFW2-INint-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=192.168.1.255 LEN=251 TOS=0x00 PREC=0x00 TTL=64 ID=11 DF PROTO=UDP SPT=138 DPT=138 LEN=231 SFW2-INint-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=192.168.1.255 LEN=234 TOS=0x00 PREC=0x00 TTL=64 ID=12 DF PROTO=UDP SPT=138 DPT=138 LEN=214 SFW2-INint-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=192.168.1.255 LEN=251 TOS=0x00 PREC=0x00 TTL=64 ID=13 DF PROTO=UDP SPT=138 DPT=138 LEN=231 SFW2-INint-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.2 DST=192.168.1.255 LEN=234 TOS=0x00 PREC=0x00 TTL=64 ID=14 DF PROTO=UDP SPT=138 DPT=138 LEN=214 lp: driver loaded but no devices found lp: driver loaded but no devices found TIA Anirban Biswas -- Masjid dha de, mandir dha de, dha de jo kucch dainda Par kisi da dil na dhain, Rab dilan vich rehnda.. English Tear down the mosque and the temple; break everything in sight But do not break a person's heart, it is there that God resides