Hello folks, There have been messags in the syslog about scsi. an snapshot from the log is attached at th bottom. There is another problem with the system time remaining incosistent. I am running ctcs and run time it jumps tim like from been running for 1m00s to directly 5m14s all of a sudden. would appreciate some help. thank you. regards suse processor: AMD Opteron(tm) Processor 250 Motherboard: i randomly thought there might be a proc entery for motherboard make but i got this when i tried, find /proc -name mother* find: WARNING: Hard link count is wrong for /proc/1/task: this may be a bug in your filesystem driver. Automatically turning on find's -noleaf option. Earlier results may have failed to include directories that should have been searched. I am using reiserfs. It is a tyan motherboard S2882 Pro uname 2.6.11.4-20a-smp #1 SMP Wed Mar 23 21:52:37 UTC 2005 x86_64 x86_64 x86_64 GNU/Linux lspci | grep SCSI 0000:02:06.0 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10) 0000:02:06.1 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10) log begin ----------- Jun 3 05:00:36 linux kernel: DevQ(0:1:0): 0 waiting Jun 3 05:00:36 linux kernel: (scsi0:A:1:0): Device is disconnected, re-queuing SCB Jun 3 05:00:36 linux kernel: Recovery code sleeping Jun 3 05:00:36 linux kernel: (scsi0:A:1:0): Abort Tag Message Sent Jun 3 05:00:36 linux kernel: (scsi0:A:1:0): SCB 15 - Abort Completed. Jun 3 05:00:36 linux kernel: Recovery SCB completes Jun 3 05:00:36 linux kernel: found == 0x1 Jun 3 05:00:36 linux kernel: Recovery code awake Jun 3 05:00:36 linux kernel: scsi0:0:1:0: Attempting to abort cmd ffff81001908ab80: 0x28 0x0 0x1 0xe7 0x56 0x9f 0x0 0x0 0x8 0x0 Jun 3 05:00:36 linux kernel: scsi0:0:1:0: Command not found Jun 3 05:00:36 linux kernel: scsi0:0:1:0: Attempting to abort cmd ffff8100fb41d6c0: 0x28 0x0 0x0 0x67 0x67 0x0 0x0 0x0 0x40 0x0 Jun 3 05:00:36 linux kernel: scsi0:0:1:0: Command not found Jun 3 05:00:36 linux kernel: scsi0:0:1:0: Attempting to abort cmd ffff81007e468640: 0x28 0x0 0x0 0x8a 0xf8 0x40 0x0 0x0 0x40 0x0 Jun 3 05:00:36 linux kernel: scsi0:0:1:0: Command not found Jun 3 05:00:36 linux kernel: scsi0:0:1:0: Attempting to abort cmd ffff8100fb41d4c0: 0x28 0x0 0x0 0x84 0x29 0xc0 0x0 0x0 0x40 0x0 Jun 3 05:00:36 linux kernel: scsi0:0:1:0: Command not found Jun 3 05:00:36 linux kernel: scsi0:0:1:0: Attempting to abort cmd ffff81001908a380: 0x28 0x0 0x0 0x86 0xb5 0x80 0x0 0x0 0x40 0x0 Jun 3 05:00:36 linux kernel: scsi0:0:1:0: Command not found Jun 3 05:00:36 linux kernel: scsi0:0:1:0: Attempting to abort cmd ffff81007302d7c0: 0x28 0x0 0x0 0x8c 0x6b 0xc0 0x0 0x0 0x40 0x0 Jun 3 05:00:36 linux kernel: scsi0:0:1:0: Command not found Jun 3 05:00:36 linux kernel: scsi0:0:1:0: Attempting to abort cmd ffff81007302d9c0: 0x28 0x0 0x0 0x8b 0x99 0xc0 0x0 0x0 0x40 0x0 Jun 3 05:00:36 linux kernel: scsi0:0:1:0: Command not found Jun 3 05:00:36 linux kernel: scsi0:0:1:0: Attempting to abort cmd ffff810017f741c0: 0x28 0x0 0x0 0x79 0x6 0x40 0x0 0x0 0x40 0x0 Jun 3 05:00:36 linux kernel: scsi0:0:1:0: Command not found Jun 3 05:00:36 linux kernel: scsi0:0:1:0: Attempting to abort cmd ffff81007302d5c0: 0x28 0x0 0x0 0x87 0x28 0x0 0x0 0x0 0x40 0x0 Jun 3 05:00:36 linux kernel: scsi0:0:1:0: Command not found Jun 3 05:01:42 linux kernel: scsi0:0:1:0: Attempting to abort cmd ffff8100863be480: 0x28 0x0 0x0 0x87 0x7e 0x0 0x0 0x0 0x40 0x0 Jun 3 05:01:42 linux kernel: scsi0: At time of recovery, card was not paused Jun 3 05:01:42 linux kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< Jun 3 05:01:42 linux kernel: scsi0: Dumping Card State at program address 0xf Mode 0x33 Jun 3 05:01:42 linux kernel: Card was paused Jun 3 05:01:42 linux kernel: HS_MAILBOX[0x0] INTCTL[0xc0]:(SWTMINTEN|SWTMINTMASK) Jun 3 05:01:42 linux kernel: SEQINTSTAT[0x0] SAVED_MODE[0x0] DFFSTAT[0x13]:(CURRFIFO_NONE|FIFO0FREE) Jun 3 05:01:42 linux kernel: SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0] Jun 3 05:01:42 linux kernel: LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0] Jun 3 05:01:42 linux kernel: SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x0] Jun 3 05:01:42 linux kernel: SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SEQ_FLAGS2[0x0] Jun 3 05:01:42 linux kernel: SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0] Jun 3 05:01:42 linux kernel: PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) Jun 3 05:04:05 linux kernel: LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] Jun 3 05:04:05 linux kernel: LQOSTAT1[0x0] LQOSTAT2[0x0] Jun 3 05:04:05 linux kernel: Jun 3 05:04:05 linux kernel: SCB Count = 32 CMDS_PENDING = 9 LASTSCB 0xffff CURRSCB 0x1d NEXTSCB 0x0 Jun 3 05:04:05 linux kernel: qinstart = 16894 qinfifonext = 16894 Jun 3 05:04:05 linux kernel: QINFIFO: Jun 3 05:04:05 linux kernel: WAITING_TID_QUEUES: Jun 3 05:04:05 linux kernel: Pending list: Jun 3 05:04:05 linux kernel: 29 FIFO_USE[0x0] SCB_CONTROL[0x64]:(DISCONNECTED|TAG_ENB|DISCENB) Jun 3 05:04:05 linux kernel: SCB_SCSIID[0x17] Jun 3 05:04:05 linux kernel: 17 FIFO_USE[0x0] SCB_CONTROL[0x64]:(DISCONNECTED|TAG_ENB|DISCENB) Jun 3 05:04:05 linux kernel: SCB_SCSIID[0x17] Jun 3 05:04:05 linux kernel: 11 FIFO_USE[0x0] SCB_CONTROL[0x64]:(DISCONNECTED|TAG_ENB|DISCENB) Jun 3 05:04:05 linux kernel: SCB_SCSIID[0x17] Jun 3 05:04:05 linux kernel: 12 FIFO_USE[0x0] SCB_CONTROL[0x64]:(DISCONNECTED|TAG_ENB|DISCENB) Jun 3 05:04:05 linux kernel: SCB_SCSIID[0x17] Jun 3 05:04:05 linux kernel: 25 FIFO_USE[0x0] SCB_CONTROL[0x64]:(DISCONNECTED|TAG_ENB|DISCENB) Jun 3 05:04:05 linux kernel: SCB_SCSIID[0x17] Jun 3 05:04:05 linux kernel: 21 FIFO_USE[0x0] SCB_CONTROL[0x64]:(DISCONNECTED|TAG_ENB|DISCENB) Jun 3 05:04:05 linux kernel: SCB_SCSIID[0x17] Jun 3 05:04:05 linux kernel: 19 FIFO_USE[0x0] SCB_CONTROL[0x64]:(DISCONNECTED|TAG_ENB|DISCENB) Jun 3 05:04:05 linux kernel: SCB_SCSIID[0x17] Jun 3 05:04:05 linux kernel: 14 FIFO_USE[0x0] SCB_CONTROL[0x64]:(DISCONNECTED|TAG_ENB|DISCENB) Jun 3 05:04:05 linux kernel: SCB_SCSIID[0x17] Jun 3 05:04:05 linux kernel: 15 FIFO_USE[0x0] SCB_CONTROL[0x64]:(DISCONNECTED|TAG_ENB|DISCENB) Jun 3 05:04:05 linux kernel: SCB_SCSIID[0x17] Jun 3 05:04:05 linux kernel: Total 9 Jun 3 05:04:05 linux kernel: Kernel Free SCB list: 7 31 10 8 13 4 9 24 20 26 27 22 6 2 5 18 16 0 1 28 3 23 30 Jun 3 05:04:05 linux kernel: Sequencer Complete DMA-inprog list: Jun 3 05:04:05 linux kernel: Sequencer Complete list: Jun 3 05:04:05 linux kernel: Sequencer DMA-Up and Complete list: Jun 3 05:04:05 linux kernel: Jun 3 05:04:05 linux kernel: scsi0: FIFO0 Free, LONGJMP == 0x81d8, SCB 0x1d Jun 3 05:04:05 linux kernel: SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) Jun 3 05:04:05 linux kernel: SEQINTSRC[0x0] DFCNTRL[0x4]:(DIRECTION) DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) Jun 3 05:04:05 linux kernel: SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] Jun 3 05:04:05 linux kernel: SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0 Jun 3 05:04:05 linux kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) Jun 3 05:04:05 linux kernel: scsi0: FIFO1 Active, LONGJMP == 0x81d8, SCB 0x17 Jun 3 05:04:05 linux kernel: SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS) Jun 3 05:04:05 linux kernel: SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) Jun 3 05:04:05 linux kernel: SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] Jun 3 05:04:05 linux kernel: SOFFCNT[0x0] MDFFSTAT[0x4]:(DLZERO) SHADDR = 0x00, SHCNT = 0x0 Jun 3 05:04:05 linux kernel: HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) Jun 3 05:04:05 linux kernel: LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 Jun 3 05:04:05 linux kernel: scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 Jun 3 05:04:05 linux kernel: scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 Jun 3 05:04:05 linux kernel: Jun 3 05:04:05 linux kernel: SIMODE0[0xc]:(ENOVERRUN|ENIOERR) Jun 3 05:04:06 linux kernel: CCSCBCTL[0x4]:(CCSCBDIR) Jun 3 05:04:06 linux kernel: scsi0: REG0 == 0xffff, SINDEX = 0x1e0, DINDEX = 0xe1 Jun 3 05:04:06 linux kernel: scsi0: SCBPTR == 0x1d, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff54 Jun 3 05:04:06 linux kernel: CDB 28 0 1 e7 56 67 Jun 3 05:04:06 linux kernel: STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 Jun 3 05:04:06 linux kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> ------------------- __________________________________ Discover Yahoo! Have fun online with music videos, cool games, IM and more. Check it out! http://discover.yahoo.com/online.html
suse amd wrote:
Hello folks,
There have been messags in the syslog about scsi. an snapshot from the log is attached at th bottom. There is another problem with the system time remaining incosistent. I am running ctcs and run time it jumps tim like from been running for 1m00s to directly 5m14s all of a sudden.
would appreciate some help.
thank you. regards suse
processor: AMD Opteron(tm) Processor 250
Motherboard:
i randomly thought there might be a proc entery for motherboard make but i got this when i tried,
find /proc -name mother* find: WARNING: Hard link count is wrong for /proc/1/task: this may be a bug in your filesystem driver. Automatically turning on find's -noleaf option. Earlier results may have failed to include directories that should have been searched.
I am using reiserfs. It is a tyan motherboard S2882 Pro
Sounds like a problem I had recently. Check the thread at: http://lists.suse.com/archive/suse-linux-e/2005-May/3719.html Cheers, Dave
participants (2)
-
Dave Howorth
-
suse amd