Hi, I'm updating (for the first time) the BIOS of my K8W Thunder. I've just done the flash of the BIOS and now I'm cleaning the CMOS following the instruction found in the Tyan web site. I have a clarifying question on their last poit saying : * You will need to make the BIOS settings at this point and you're done. What does it mean? Better, what setting it is reffering to? Thanks Angelo On Tue, 29 Jun 2004 17:16:37 +0300 Janis Klava <jklava@lettux.lv> wrote:
Hello Angelo
The BIOS upgrade instructions are not OS specific, they apply to any box and are the same, Win or Linux.
What you do need is a Windows 95 or 98 boot floppy disk to start your computer to enable the BIOS installation.
Insert the boot floppy, start computer and press F5 as per instructions
When you see the a:\ prompt insert the BIOS disk and type 'flash'
Then fully follow the instructions on clearing the cmos memory.
Tyan > support > BIOS support > Socket 940 > Thunder K8W (S2885) BIOS
On Tuesday 29 June 2004 16:54, Angelo Secchi wrote:
Thanks for your suggestions. Actually my choice of memory was financially constrained, plans are of course to expand it as soon as money comes. Just a "quick" question on upgrading BIOS (it is the first time I update a BIOS): How do I update my BIOS? (In the Tyan page I've found instructions only "Win oriented")
Thanks
Angelo
On Tue, 29 Jun 2004 16:39:32 +0300
Janis Klava <jklava@lettux.lv> wrote:
Hello Angelo,
Download the latest BIOS from Tyan site (2885_202) and install it first, before you do anything else. Otherwise there will be problems with SATA.
Install 9.1 and do an online upgrade and say 'yes' to nvidia driver, it works fine.
By using only one memory dimm per cpu you will not get the benefit of 128 bit wide memory access. Maybe put the two 1 Gb dimms in slots 1 & 2 for cpu #1 and get a couple more for cpu #2
Janis
-- ======================================================== Angelo Secchi PGP Key ID:EA280337 ======================================================== Current Position: Graduate Fellow Scuola Superiore S.Anna Piazza Martiri della Liberta' 33, Pisa, 56127 Italy ph.: +39 050 883365 email: secchi@sssup.it www.sssup.it/~secchi/ ========================================================
-- Check the List-Unsubscribe header to unsubscribe For additional commands, email: suse-amd64-help@suse.com
-- ======================================================== Angelo Secchi PGP Key ID:EA280337 ======================================================== Current Position: Graduate Fellow Scuola Superiore S.Anna Piazza Martiri della Liberta' 33, Pisa, 56127 Italy ph.: +39 050 883365 email: secchi@sssup.it www.sssup.it/~secchi/ ========================================================