On Thu, Sep 27, 2007 at 11:04:24AM +0200, Felix M?ller wrote:
Hi,
(EE) RADEONHD(0): RHDLVTMAInit: any other device than the M56 is still unsupported.
I have altered this now to only stop >= RS690.
This still might not fix all the issues though,
Thanks alot this seems to be getting alot further now. The panel seems even to be detected but it fails with: (II) RADEONHD(0): Monitor "SEC-3633" connected to "Panel": Bandwidth:68MHz Horizontal timing: 49.0 - 49.0kHz Vertical timing: 60.0 - 60.0Hz Allows reduced blanking. Uses Fixed Modes. Attached modes: Modeline "1280x800" 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync
Above is the EDID data for your panel. Notice that reduced is allowed.
(II) RADEONHD(0): Configured Monitor "Monitor[0]": Bandwidth:0MHz Horizontal timing: 30.0 - 62.0kHz Vertical timing: 43.0 - 60.0Hz Attached modes: Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync ... Modeline "1024x768" 194.02 1024 1108 1220 1416 768 768 770 806 doublescan -hsync +vsync
A monitor from the config file, no reduced blanking allowed. Hopefully, when you adjust your config file, things will magically work... hopefully :) Thanks. Luc Verhaegen. SUSE/Novell X Driver Developer. -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org