On 18/07/15 02:15, Per Jessen wrote:
Basil Chupin wrote:
On 17/07/15 18:34, Per Jessen wrote:
Basil Chupin wrote:
On 17/07/15 02:55, Per Jessen wrote:
I used to be an HP (inkjet) fan too, until we installed some HP all-singing, all-dancing in the office - it wasn't used enough, and both the ink-nozzles and the ink-reservoirs dried out, which made it a bit of a pricey experience. I switched both office printers to Kyocera lasers a few years ago, and have never looked back. Model name/number please (if it was already mentioned I missed it).
Also, is it simply a BW printer or colour? I am not certain, but I think it was called HP 9110 All-in-One or some such. Colour. Groan... :-( .
The model/number of the Kyocera laser(s) with which you "have never looked back" :-) . Sorry - it is a Kyocera CS5015N and it's colour.
Thank you for this info. (It is actually Kyocera FS-C5015N.) Your comments about it certainly promote the Kyocera as a reliable printer because the one(s) you have are now some 8 years old - and the driver for it are listed under Legacy Drivers on the Kyocera site. I have looked at what I consider to be the current equivalent model to the one above and find it just bit too costly (~$A1800) for the amount of printing I do. The printer I have, an HP Photosmart 8450, will do me for a while. Performs impeccably. But as I often do not print for long periods the cartridges blocked up. I have new cartridges yet to be installed and when I do I think I will remove them in between printing jobs, tape up the nozzles, and only re-install them when I need to print again. (I also have a LEXMARK 4039 12R BW laser printer which I haven't used for zonks. It's a centronics printer. I may just get enthused enough to connect it, so some voodoo incantations over it and see if it will print :-) . I did many a BW photo on this printer - and they are all still looking perfect around the house.) BC -- Using openSUSE 13.2, KDE 4.14.6 & kernel 4.1.2-1 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX660 GPU -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org