On Tuesday 17 October 2006 02:19, Greg Wallace wrote:
On Monday, October 16, 2006 @ 2:04 PM, Felix Miata wrote:
Subject: Re: [SLE] Need help diagnosing hardware problem
On 06/10/16 13:30 (GMT-0500) Greg Wallace apparently typed:
I am having a hardware problem with my machine and am trying to diagnose
it.
The first thing that happens is that my screen freezes. It has always happened when my screen saver was running, but I'm assuming that's just a coincidence. After the screen saver freezes, here are some things that
have
happened on reboot.
What happens if you disable the screensaver and DPMS?
Could a screensaver problem cause the machine to not be able to re-boot? I forgot where DMPS is controlled. Could you tell me how to turn it off?
1) The computer beeps twice and nothing happens. No bios screen comes
up,
no disk activity, nothing.
<snip>
2) There is disk activity as if the machine is booting, but the screen
is
blank.
3) Once, the machine actually booted, but what was on the screen was
pure
garbage -- a screen full of letters overlaying other letters overlaying icons, etc. There wasn't a centimeter of blank screen space. It was completely covered with this garbage.
My guess would be that I've got a video card going out, but item 1) makes
me
wonder. Could a bad video card actually cause the machine to just give
two
beeps and not even try to boot?
All symptoms point to a video card problem, but this includes a possible video card slot problem. A BIOS may balk at continuing POST when it
On Monday, October 16, 2006 @ 7:40 PM, Rikard Johnels wrote: thinks
it's supposed to have working video.
.
I'm starting to suspect the video card as the problem myself. Other than the instance with the two beeps (which might could be caused by a video card problem, though I have no way of knowing), all of the other cases resulted in me not seeing any activity on the screen at boot up. I mean I didn't even get the bios screen. Then there was the time when the screen was just completely covered in garbage. Even the time when I got the two beeps I still didn't get anything on the screen. I'm thinking I might just spring for a new video card just to see if that fixes it. I don't do any heavy graphics, so I could get by with a fairly cheap bare bones type of card anyway, so it probably wouldn't cost too much just to try that.
In all cases, if I let the machine sit for maybe just 5 minutes it will re-boot normally (so far, anyway, but I tend
to
think the problem will get worse over time). Once it's back up, it will
run
for some time with no problems (I don't recall it ever happening back to back on the same day, but if I left it up long enough the second time I suspect it would ultimately lock up again). There's some pattern here in all of this, but also some inconsistency. Any help diagnosing this
problem
greatly appreciated.
These time differences make it appear it may be heat and/or voltage (and thus power supply) related. If it hasn't had a dust removal since it was new, that's probably long overdue. If the machine was here, my 3rd move would be to see what happens with a different video card, 2nd being test
the
PS, 1st being cleaning. If you don't have another card to try, at least try reseating yours. Try leaving the cover off and pointing a big fan at it to see if less heat is any help. If you have any cards in slots that aren't necessary to run the OS, pull them out to see if it changes anything.
1. Cleaning -- Well, I cleaned it out as best I could. I tried a vacuum and a wisk broom. It's hard to a lot of the areas because of all of the things sticking up in the air and covering other things up. I have to say, however, that it really didn't look all that dirty.
2. Power supply -- How does one test the power supply?
Overall, as I said above, I'm suspecting a bad video card as the culprit.
Thanks, Greg Wallace
What DELL model is it?
Optiplex GX260
This might be a start for finding manuals etc: http://support.euro.dell.com/support/index.aspx
I've already looked at the Dell site. It appears that my machine is too old to have any info out there. Even for the newer machines, I couldn't find any information about what beep codes mean.
-- /Rikard
FD C5 59 D4 B6 78 46 1C EE 56 > Greg Wallace