Mailinglist Archive: opensuse (4570 mails)

[Albert-Eugen Vetter <listen@xxxxxxxxxxxxxx>]

Danny Kukawka schrieb:

> On Thursday 10 November 2005 01:18, CPHennessy wrote:
>  
>
> > Hi,
> >  I've a laptop with a SD card reader, which when I use "lspci" I can see
> > is a 06:09.0 Cardbus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
> >
> > When I insert an SD card it is not mounted automatically. Should it be ?
> > How can I mount it manually ?
> >    
>
> Unknown. Please attach the output of lshal.
>
> Danny 
Hi Danny,

I have the same problem. All PCMCIA cards don't work.
Here the ouput vom lshal:

udi = '/org/freedesktop/Hal/devices/pci_1180_476'
 info.udi = '/org/freedesktop/Hal/devices/pci_1180_476'  (string)
 linux.subsystem = 'pci'  (string)
 linux.hotplug_type = 1  (0x1)  (int)
 pci.subsys_product = 'Unknown (0x1177)'  (string)
 pci.subsys_vendor = 'ASUSTeK Computer Inc.'  (string)
 info.product = 'RL5c476 II'  (string)
 pci.product = 'RL5c476 II'  (string)
 info.vendor = 'Ricoh Co Ltd'  (string)
 pci.vendor = 'Ricoh Co Ltd'  (string)
 pci.device_protocol = 0  (0x0)  (int)
 pci.device_subclass = 7  (0x7)  (int)
 pci.device_class = 6  (0x6)  (int)
 pci.subsys_vendor_id = 4163  (0x1043)  (int)
 pci.subsys_product_id = 4471  (0x1177)  (int)
 pci.vendor_id = 4480  (0x1180)  (int)
 pci.product_id = 1142  (0x476)  (int)
 info.linux.driver = 'yenta_cardbus'  (string)
 pci.linux.sysfs_path = 
'/sys/devices/pci0000:00/0000:00:1e.0/0000:01:01.0'  (string)
 info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'  (string)
 info.bus = 'pci'  (string)
 linux.sysfs_path_device = 
'/sys/devices/pci0000:00/0000:00:1e.0/0000:01:01.0'  (string)
 linux.sysfs_path = 
'/sys/devices/pci0000:00/0000:00:1e.0/0000:01:01.0'  (string)

Thanks Albert