Danny Kukawka schrieb:

On Thursday 10 November 2005 01:18, CPHennessy wrote:

...

Hi, I've a laptop with a SD card reader, which when I use "lspci" I can see is a 06:09.0 Cardbus bridge: Ricoh Co Ltd RL5c476 II (rev b3)

When I insert an SD card it is not mounted automatically. Should it be ? How can I mount it manually ?

Unknown. Please attach the output of lshal.

Danny

Hi Danny, I have the same problem. All PCMCIA cards don't work. Here the ouput vom lshal: udi = '/org/freedesktop/Hal/devices/pci_1180_476' info.udi = '/org/freedesktop/Hal/devices/pci_1180_476' (string) linux.subsystem = 'pci' (string) linux.hotplug_type = 1 (0x1) (int) pci.subsys_product = 'Unknown (0x1177)' (string) pci.subsys_vendor = 'ASUSTeK Computer Inc.' (string) info.product = 'RL5c476 II' (string) pci.product = 'RL5c476 II' (string) info.vendor = 'Ricoh Co Ltd' (string) pci.vendor = 'Ricoh Co Ltd' (string) pci.device_protocol = 0 (0x0) (int) pci.device_subclass = 7 (0x7) (int) pci.device_class = 6 (0x6) (int) pci.subsys_vendor_id = 4163 (0x1043) (int) pci.subsys_product_id = 4471 (0x1177) (int) pci.vendor_id = 4480 (0x1180) (int) pci.product_id = 1142 (0x476) (int) info.linux.driver = 'yenta_cardbus' (string) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:01.0' (string) info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' (string) info.bus = 'pci' (string) linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:01.0' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:01.0' (string) Thanks Albert

Hi, On Thu, 10 Nov 2005, Berthold Gunreben wrote:

On Thu, 10 Nov 2005, CPHennessy wrote:

...

I've a laptop with a SD card reader, which when I use "lspci" I can see is a 06:09.0 Cardbus bridge: Ricoh Co Ltd RL5c476 II (rev b3)

When I insert an SD card it is not mounted automatically. Should it be ? How can I mount it manually ?

Sorry, but this hardware is completely unsupported. There are no specs that could be used to build a driver. I have the same problem with my thinkpad here ...

This cardbus controller works perfectly here under SUSE-10.0, and did before with 9.3 too. My WLAN pc card is attached to it. 02:04.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac) 02:04.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac) Excerpt from "lsmod": ath_pci 86432 0 ath_rate_sample 19472 1 ath_pci wlan 158068 3 ath_pci,ath_rate_sample ath_hal 172656 3 ath_pci,ath_rate_sample pcmcia 45972 0 firmware_class 12416 1 pcmcia yenta_socket 27276 3 rsrc_nonstatic 14720 1 yenta_socket pcmcia_core 47260 3 pcmcia,yenta_socket,rsrc_nonstatic Cheers -e -- Eberhard Moenkeberg (emoenke@gwdg.de, em@kki.org)

On Thu, 10 Nov 2005, Berthold Gunreben wrote:

On Thu, 10 Nov 2005, Eberhard Moenkeberg wrote:

...

On Thu, 10 Nov 2005, Berthold Gunreben wrote:

...

On Thu, 10 Nov 2005, CPHennessy wrote:

...

...

I've a laptop with a SD card reader, which when I use "lspci" I can see is a 06:09.0 Cardbus bridge: Ricoh Co Ltd RL5c476 II (rev b3)

When I insert an SD card it is not mounted automatically. Should it be ? How can I mount it manually ?

Sorry, but this hardware is completely unsupported. There are no specs that could be used to build a driver. I have the same problem with my thinkpad here ...

In the meantime, there is a project that creates such a driver. You find the pages at http://mmc.drzeus.cx/wiki/Linux/Drivers/sdhci . This driver is not yet in the kernel, and I guess that there will be a special kernel module package needed to get support for this. Berthold -- ------------------------------------------------------------------ Berthold Gunreben SUSE Linux GmbH -- Dokumentation mailto:bg@suse.de Maxfeldstr. 5 http://www.suse.de/ D-90409 Nuernberg, Germany