run xf86config Much better for setting up. Had too many failures with Sax. Especially with my S3 Savage! Kev -----Original Message----- From: Bill Moseley [mailto:moseley@hank.org] Sent: 13 April 2000 17:26 To: suse-linux-e@suse.com Subject: [SLE] Is this an unsupported video card? On one machine setting up X was so simple that I don't remember how I did it. I guess I ran sax, but I can't remember. Running sax on a new machine didn't work. Here's the output from ServerLog and StartLog. ========== ServerLog ========== Free86 Version 3.3.5 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: August 23 1999 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: Linux 2.2.12 i686 [ELF] SuSE Configured drivers: S3: accelerated server for S3 graphics adaptors (Patchlevel 0) newmmio, mmio_928, s3_generic (using VT number 7) XF86Config: /var/X11R6/sax/config/StartConfig (**) stands for supplied, (--) stands for probed/default values (**) XKB: rules: "xfree86" (**) XKB: model: "pc102" (**) XKB: layout: "us" (**) XKB: variant: "nodeadkeys" (**) Mouse: type: Microsoft, device: /tmp/sax/mouse, baudrate: 1200 (**) Mouse: buttons: 3 (**) S3: Graphics device ID: "Primary Card" (**) S3: Monitor ID: "Primary Monitor" (**) FontPath set to "/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:uns caled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/URW,/usr/X11R6 /lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts /75dpi,/usr/X11R6/lib/X11/fonts/100dpi" (--) S3: PCI: unknown (please report), ID 0x8a13 rev 2, Linear FB @ 0xdc000000 (--) S3: Unknown S3 chipset: chip_id = 0x8a13 rev. 2 *** None of the configured devices were detected.*** Fatal server error: no screens found ================ StartLog ================ [...] Server Setting -------------- start new XF86_S3 server _X11TransSocketUNIXConnect: Can't connect: errno = 111 Application initialization failed: couldn't connect to display ":1" Error in startup script: invalid command name "winfo" while executing "winfo exists $newname" (procedure "Window" line 11) invoked from within "Window show ." (file "/var/X11R6/sax/bin/intro.tcl" line 311) _X11TransSocketUNIXConnect: Can't connect: errno = 111 Application initialization failed: couldn't connect to display ":1" Error in startup script: invalid command name "winfo" while executing "winfo exists $newname" (procedure "Window" line 11) invoked from within "Window show ." (file "/var/X11R6/sax/bin/mainsax.tcl" line 14277) while executing "exec $var(RunMainSax) $options -display $disp" (file "/var/X11R6/sax/bin/SaX.tcl" line 1165) Bill Moseley mailto:moseley@hank.org -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/ -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/