Hallo Liste , bin am verzweifeln, habe per YAST die Fritzcart eingerichtet cfg-contr0 AREACODE="0511" DIALPREFIX="0" DRIVER="hisax_fcpcipnp" NAME="AVM FRITZ!PCI v2.0" PARA_SUBTYPE="0" PARA_TYPE="1000" PROTOCOL="euro" STARTMODE="onboot" UNIQUE="vSkL.GGXqL9GEYV1" PROVIDER="" dann habe ich die Schnittstelle ippp0 kofiguriert und die Einwahl für alle erlaubt (zum testen) cfg-net0 CALLBACK="off" CBDELAY="2" CHARGEHUP="on" DEFAULTROUTE="no" DYNAMICIP="no" FIREWALL="no" IPADDR="192.168.0.2" IPPPD_OPTIONS="+pap +chap" MSN="27" MULTILINK="no" PROTOCOL="syncppp" PROVIDER="provider1" PTPADDR="192.168.0.3" REMOTE_IN="" SECURE="off" STARTMODE="onboot" isdnctrl list all Current setup of interface 'ippp0': EAZ/MSN: 27 Phone number(s): Outgoing: 00 Incoming: Dial mode: auto Secure: off Callback: off Reject before Callback: on Callback-delay: 2 Dialmax: 1 Hangup-Timeout: 300 Incoming-Hangup: off ChargeHangup: on Charge-Units: 0 Charge-Interval: 0 Layer-2-Protocol: hdlc Layer-3-Protocol: trans Encapsulation: syncppp Slave Interface: None Slave delay: 10 Master Interface: None Pre-Bound to: Nothing PPP-Bound to: 0 aber sofort beim einwählen kommt ignore kernel: isdn_net: call from 001722062121 -> 0 27 ignored Feb 23 12:10:33 PDC kernel: isdn_tty: call from 001722062121 -> 27 ignored Feb 23 12:10:33 PDC isdnlog: Feb 23 12:10:33 Call to tei 127 from +1 722062121, USA, on +49 511/27, Hannover HANGUP (Timeout) Feb 23 12:10:33 PDC isdnlog: Feb 23 12:10:33 * Call to tei 127 from +1 722062121, USA, on +49 511/27, Hannover RING (3.1 kHz audio) fehlt da noch ein eintrag in der inittab ?? wieso werde ich sofort abgelehnt, habe das selbe Spiel mit einem United Linux Rechner gemacht , genau das selbe. Die Einrichtung mit YAST scheint nit zu reichen. Wer kann mir den entscheidenen Denkanstoss liefern. Gruss Thomas