EINWAHLSERVER UNTER SUSE 8.2
Hallo Liste , bin am verzweifeln, habe per YAST die Fritzcart eingerichtet cfg-contr0 AREACODE="0511" DIALPREFIX="0" DRIVER="hisax_fcpcipnp" NAME="AVM FRITZ!PCI v2.0" PARA_SUBTYPE="0" PARA_TYPE="1000" PROTOCOL="euro" STARTMODE="onboot" UNIQUE="vSkL.GGXqL9GEYV1" PROVIDER="" dann habe ich die Schnittstelle ippp0 kofiguriert und die Einwahl für alle erlaubt (zum testen) cfg-net0 CALLBACK="off" CBDELAY="2" CHARGEHUP="on" DEFAULTROUTE="no" DYNAMICIP="no" FIREWALL="no" IPADDR="192.168.0.2" IPPPD_OPTIONS="+pap +chap" MSN="27" MULTILINK="no" PROTOCOL="syncppp" PROVIDER="provider1" PTPADDR="192.168.0.3" REMOTE_IN="" SECURE="off" STARTMODE="onboot" isdnctrl list all Current setup of interface 'ippp0': EAZ/MSN: 27 Phone number(s): Outgoing: 00 Incoming: Dial mode: auto Secure: off Callback: off Reject before Callback: on Callback-delay: 2 Dialmax: 1 Hangup-Timeout: 300 Incoming-Hangup: off ChargeHangup: on Charge-Units: 0 Charge-Interval: 0 Layer-2-Protocol: hdlc Layer-3-Protocol: trans Encapsulation: syncppp Slave Interface: None Slave delay: 10 Master Interface: None Pre-Bound to: Nothing PPP-Bound to: 0 aber sofort beim einwählen kommt ignore kernel: isdn_net: call from 001722062121 -> 0 27 ignored Feb 23 12:10:33 PDC kernel: isdn_tty: call from 001722062121 -> 27 ignored Feb 23 12:10:33 PDC isdnlog: Feb 23 12:10:33 Call to tei 127 from +1 722062121, USA, on +49 511/27, Hannover HANGUP (Timeout) Feb 23 12:10:33 PDC isdnlog: Feb 23 12:10:33 * Call to tei 127 from +1 722062121, USA, on +49 511/27, Hannover RING (3.1 kHz audio) fehlt da noch ein eintrag in der inittab ?? wieso werde ich sofort abgelehnt, habe das selbe Spiel mit einem United Linux Rechner gemacht , genau das selbe. Die Einrichtung mit YAST scheint nit zu reichen. Wer kann mir den entscheidenen Denkanstoss liefern. Gruss Thomas
Am Montag, 1. März 2004 09:51 schrieb thomas.harms@email.de:
Hallo Liste ,
Hallo Thomas,
bin am verzweifeln, habe per YAST die Fritzcart eingerichtet
cfg-contr0
AREACODE="0511" DIALPREFIX="0" DRIVER="hisax_fcpcipnp" NAME="AVM FRITZ!PCI v2.0" PARA_SUBTYPE="0" PARA_TYPE="1000" PROTOCOL="euro" STARTMODE="onboot" UNIQUE="vSkL.GGXqL9GEYV1" PROVIDER=""
dann habe ich die Schnittstelle ippp0 kofiguriert und die Einwahl für alle erlaubt (zum testen)
cfg-net0 CALLBACK="off" CBDELAY="2" CHARGEHUP="on" DEFAULTROUTE="no" DYNAMICIP="no" FIREWALL="no" IPADDR="192.168.0.2" IPPPD_OPTIONS="+pap +chap"
Ich würde zum Testen alle pap/chap-Optionen herausnehmen
MSN="27" MULTILINK="no" PROTOCOL="syncppp" PROVIDER="provider1" PTPADDR="192.168.0.3" REMOTE_IN="" SECURE="off" STARTMODE="onboot"
isdnctrl list all
Current setup of interface 'ippp0':
EAZ/MSN: 27 Phone number(s): Outgoing: 00 Incoming: Dial mode: auto Secure: off Callback: off Reject before Callback: on Callback-delay: 2 Dialmax: 1 Hangup-Timeout: 300 Incoming-Hangup: off ChargeHangup: on
Würde ich auf off stellen. Kenne die Option zwar nicht, aber mit Charge-Units=0 könnte es sein, dass er keine Anrufe zulässt.
Charge-Units: 0 Charge-Interval: 0 Layer-2-Protocol: hdlc Layer-3-Protocol: trans Encapsulation: syncppp Slave Interface: None Slave delay: 10 Master Interface: None Pre-Bound to: Nothing PPP-Bound to: 0
aber sofort beim einwählen kommt ignore
kernel: isdn_net: call from 001722062121 -> 0 27 ignored Feb 23 12:10:33 PDC kernel: isdn_tty: call from 001722062121 -> 27 ignored Feb 23 12:10:33 PDC isdnlog: Feb 23 12:10:33 Call to tei 127 from +1 722062121, USA, on +49 511/27, Hannover HANGUP (Timeout) Feb 23 12:10:33 PDC isdnlog: Feb 23 12:10:33 * Call to tei 127 from +1 722062121, USA, on +49 511/27, Hannover RING (3.1 kHz audio)
Du solltest bei Postings im Internet auf jeden Fall die Telefonnummern herausnehmen, unkenntlich machen oder verändern.
fehlt da noch ein eintrag in der inittab ?? wieso werde
Nein, der Treiber läuft, und bis zum login bist Du nicht gekommen
ich sofort abgelehnt, habe das selbe Spiel mit einem United Linux Rechner gemacht , genau das selbe. Die Einrichtung mit YAST scheint nit zu reichen.
Yast reicht nicht immer. Mehrere Tel-Nummern z.B kann man nur manuell in /etc/sysconfig/isdn bzw. /etc/sysconfig/ network/providers einstellen.
Du solltest unbedingt die SuSE-Version mit angeben (Vermute 9.0) HTH, Wolfgang
On Mon, Mar 01, 2004 at 09:51:20AM +0100, thomas.harms@email.de wrote:
Hallo Liste ,
bin am verzweifeln, habe per YAST die Fritzcart eingerichtet
cfg-contr0
AREACODE="0511" DIALPREFIX="0" DRIVER="hisax_fcpcipnp" NAME="AVM FRITZ!PCI v2.0" PARA_SUBTYPE="0" PARA_TYPE="1000" PROTOCOL="euro" STARTMODE="onboot" UNIQUE="vSkL.GGXqL9GEYV1" PROVIDER=""
dann habe ich die Schnittstelle ippp0 kofiguriert und die Einwahl für alle erlaubt (zum testen)
cfg-net0 CALLBACK="off" CBDELAY="2" CHARGEHUP="on" DEFAULTROUTE="no" DYNAMICIP="no" FIREWALL="no" IPADDR="192.168.0.2" IPPPD_OPTIONS="+pap +chap" MSN="27" MULTILINK="no" PROTOCOL="syncppp" PROVIDER="provider1" PTPADDR="192.168.0.3" REMOTE_IN="" SECURE="off" STARTMODE="onboot"
isdnctrl list all
Current setup of interface 'ippp0':
EAZ/MSN: 27 Phone number(s): Outgoing: 00 Incoming: Dial mode: auto Secure: off Callback: off Reject before Callback: on Callback-delay: 2 Dialmax: 1 Hangup-Timeout: 300 Incoming-Hangup: off ChargeHangup: on Charge-Units: 0 Charge-Interval: 0 Layer-2-Protocol: hdlc Layer-3-Protocol: trans Encapsulation: syncppp Slave Interface: None Slave delay: 10 Master Interface: None Pre-Bound to: Nothing PPP-Bound to: 0
aber sofort beim einwählen kommt ignore
kernel: isdn_net: call from 001722062121 -> 0 27 ignored Feb 23 12:10:33 PDC kernel: isdn_tty: call from 001722062121 -> 27 ignored Feb 23 12:10:33 PDC isdnlog: Feb 23 12:10:33 Call to tei 127 from +1 722062121, USA, on +49 511/27, Hannover HANGUP (Timeout) Feb 23 12:10:33 PDC isdnlog: Feb 23 12:10:33 * Call to tei 127 from +1 722062121, USA, on +49 511/27, Hannover RING (3.1 kHz audio)
Du rufst von einem Handy bzw. GSM modem an ? Das geht nicht mit ipppd, da werden andere Protokolle verwendet und die Dienstekennung verhindert das I4L rangeht.
fehlt da noch ein eintrag in der inittab ?? wieso werde ich sofort abgelehnt, habe das selbe Spiel mit einem United Linux Rechner gemacht , genau das selbe. Die Einrichtung mit YAST scheint nit zu reichen.
Was moechtest Du denn tun ? -- Karsten Keil SuSE Labs ISDN development
participants (3)
-
Karsten Keil
-
thomas.harms@email.de
-
Wolfgang Hinsch