Am Dienstag, 8. April 2008 schrieb Thomas Fankhauser:
Schau dir doch mal den SMART Status der Festtplatte an. Hatte mal ein ähnliches Problem, nach austausch einer Festplatte läuft der Rechner nun wieder einwandfrei.
Das bringt mich schonmal in eine Richtung. Die smarttools kann ich zwar nicht installieren, aber nach dem Tipp habe ich mir mal neben /var/log/messages auch dmesg angesehen, und da sehe ich 'ne Menge Meldungen in der Art: ATA: abnormal status 0x7F on port 0xF807 ata2: EH complete ata2: soft resetting port ata3.00: configured for UDMA/66 ata3: EH pending after completion, repeating EH (cnt=2) ata3: soft resetting port ATA: abnormal status 0x7F on port 0xF807 ata2: EH complete ata3.00: configured for UDMA/66 ata3: EH pending after completion, repeating EH (cnt=1) ata3: soft resetting port ata3.00: configured for UDMA/66 ata3: EH complete ata4: soft resetting port ATA: abnormal status 0x7F on port 0xDD07 ata4: EH pending after completion, repeating EH (cnt=4) ata4: soft resetting port ATA: abnormal status 0x7F on port 0xDD07 ata4: EH pending after completion, repeating EH (cnt=3) ata4: soft resetting port ATA: abnormal status 0x7F on port 0xDD07 ata4: EH pending after completion, repeating EH (cnt=2) ata4: soft resetting port Es hängen übrigens nur IDE-Geräte in dem Rechner, kein S-ATA, aber der S-ATA-Controller ist an, falls man mal eine externe S-ATA-Platte dranhängen will. mfG, Jens -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org