Hi, der DMA-Modus meiner 2. IDE-Festplatte (hdc) und meines IDE-Brenners (hdd) funktioniert unter SuSE Linux 9.1 Prof. nicht (unter der 8.1 hat es aber funktioniert)... In /var/log/boot.msg erhalte ich für hdc folgende Fehlermeldungen: [...] <6>hdc: Host Protected Area detected. <4> current capacity is 58633344 sectors (30020 MB) <4> native capacity is 58633345 sectors (30020 MB) <6>hdc: Host Protected Area disabled. <6>hdc: 58633345 sectors (30020 MB) w/1024KiB Cache, CHS=58168/16/63, UDMA(66) <6> hdc:hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } <4>hdc: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=58633344, sector=58633344 <4>hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } <4>hdc: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=58633344, sector=58633344 <4>hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } <4>hdc: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=58633344, sector=58633344 <4>hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } <4>hdc: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=58633344, sector=58633344 <6>hdc: DMA disabled <4>ide1: reset: success <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>ide1: reset: success <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>end_request: I/O error, dev hdc, sector 58633344 <3>Buffer I/O error on device hdc, logical block 58633344 <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>ide1: reset: success <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>ide1: reset: success <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>end_request: I/O error, dev hdc, sector 58633344 <3>Buffer I/O error on device hdc, logical block 58633344 <4> hdc1 [...] lspci gibt folgendes aus: 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22) 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 10) 0000:00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 10) 0000:00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 10) 0000:00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30) Kann mir jemand einen Tipp geben, woran das liegen könnte? Danke - Stephan