Output aus: cdrecord -eject -v dev=0,0,0 speed=12 driveropts=burnproof -data test.iso Sonne:/home/marco # cdrecord -eject -v dev=0,0,0 speed=12 driveropts=burnproof -data test.iso Cdrecord 1.11a28 (i686-suse-linux) Copyright (C) 1995-2002 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.22 Using libscg version 'schily-0.6' Driveropts: 'burnproof' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'LITE-ON ' Identifikation : 'LTR-40125S ' Revision : 'ZS08' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R FIFO size : 4194304 = 4096 KB Track 01: data 486 MB Total size: 558 MB (55:18.00) = 248850 sectors Lout start: 558 MB (55:20/00) = 248850 sectors cdrecord: Input/output error. test unit ready: scsi sendcmd: no error CDB: 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.004s timeout 40s cdrecord: No disk / Wrong disk!
Was sagt cdrecord -scanbus? Cdrecord 1.11a28 (i686-suse-linux) Copyright (C) 1995-2002 Jörg Schilling Linux sg driver version: 3.1.22 Using libscg version 'schily-0.6' scsibus0: 0,0,0 0) 'LITE-ON ' 'LTR-40125S ' 'ZS08' Removable CD-ROM 0,1,0 1) * 0,2,0 2) * 0,3,0 3) * 0,4,0 4) * 0,5,0 5) * 0,6,0 6) * 0,7,0 7) *
Die System-Angaben: Linux Sonne 2.4.18-64GB-SMP #1 SMP Wed Mar 27 13:58:12 UTC 2002 i686 unknown processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 1.80GHz stepping : 4 cpu MHz : 1794.569 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 3578.26 PCI devices found: Bus 0, device 0, function 0: Class 0600: PCI device 8086:2530 (rev 4). Prefetchable 32 bit memory at 0xf8000000 [0xfbffffff]. Bus 0, device 1, function 0: Class 0604: PCI device 8086:2532 (rev 4). Master Capable. Latency=32. Min Gnt=10. Bus 0, device 30, function 0: Class 0604: PCI device 8086:244e (rev 4). Master Capable. No bursts. Min Gnt=6. Bus 0, device 31, function 0: Class 0601: PCI device 8086:2440 (rev 4). Bus 0, device 31, function 1: Class 0101: PCI device 8086:244b (rev 4). I/O at 0xffa0 [0xffaf]. Bus 0, device 31, function 2: Class 0c03: PCI device 8086:2442 (rev 4). IRQ 10. I/O at 0xef40 [0xef5f]. Bus 0, device 31, function 3: Class 0c05: PCI device 8086:2443 (rev 4). IRQ 6. I/O at 0xefa0 [0xefaf]. Bus 0, device 31, function 4: Class 0c03: PCI device 8086:2444 (rev 4). IRQ 9. I/O at 0xef80 [0xef9f]. Bus 0, device 31, function 5: Class 0401: PCI device 8086:2445 (rev 4). IRQ 6. I/O at 0xe800 [0xe8ff]. I/O at 0xef00 [0xef3f]. Bus 1, device 0, function 0: Class 0300: PCI device 10de:0111 (rev 178). IRQ 11. Master Capable. Latency=248. Min Gnt=5.Max Lat=1. Non-prefetchable 32 bit memory at 0xfd000000 [0xfdffffff]. Prefetchable 32 bit memory at 0xe8000000 [0xefffffff]. Bus 2, device 8, function 0: Class 0200: PCI device 8086:2449 (rev 3). IRQ 11. Master Capable. Latency=32. Min Gnt=8.Max Lat=56. Non-prefetchable 32 bit memory at 0xfeaff000 [0xfeafffff]. I/O at 0xdf00 [0xdf3f]. Die Angaben von dmesg - die habe ich als Attachement angehängt In /var/log/messages ist nichts betreffendes... Danke und Sorry nochmals Marco