Linux version 2.4.18-64GB-SMP (root@SMP_X86.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 SMP Wed Mar 27 13:58:12 UTC 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffc0000 (usable) BIOS-e820: 000000001ffc0000 - 000000001fff8000 (ACPI data) BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Scanning bios EBDA for MXT signature On node 0 totalpages: 131008 zone(0): 4096 pages. zone(1): 126912 pages. zone(2): 0 pages. Found and enabled local APIC! Building zonelist for node : 0 Kernel command line: auto BOOT_IMAGE=linux ro root=302 acpismp=force hdc=ide-scsi ide_setup: hdc=ide-scsi Initializing CPU#0 Detected 1794.569 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 3578.26 BogoMIPS Memory: 512124k/524032k available (1504k kernel code, 11520k reserved, 429k data, 144k init, 0k highmem) Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 12K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Hyper-Threading is disabled CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 12K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Hyper-Threading is disabled CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU0: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 04 per-CPU timeslice cutoff: 1462.89 usecs. SMP motherboard not detected. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1794.5098 MHz. ..... host bus clock speed is 99.6948 MHz. cpu: 0, clocks: 996948, slice: 498474 CPU0 Waiting on wait_init_idle (map = 0x0) All processors have done init_idle PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) mxt_scan_bios: enter Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized ACPI: APM is already active, exiting vesafb: framebuffer at 0xe8000000, mapped to 0xe080d000, size 65536k vesafb: mode is 800x600x16, linelength=1600, pages=3 vesafb: protected mode interface info at c000:c510 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture.... found (800x600, 30406 bytes). Console: switching to colour frame buffer device 82x26 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI SERIAL_ACPI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev f9 PIIX4: chipset revision 4 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: IC35L040AVVA07-0, ATA DISK drive hdc: LITE-ON LTR-40125S, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 blk: queue c037ccc4, I/O limit 4095Mb (mask 0xffffffff) hda: safely enabled flush hda: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=5005/255/63, UDMA(100) ide-floppy driver 0.99 Partition check: hda: hda1 hda2 floppy0: no floppy controllers found loop: loaded (max 16 devices) Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. ide-floppy driver 0.99 SCSI subsystem driver Revision: 1.00 request_module[scsi_hostadapter]: Root fs not mounted request_module[scsi_hostadapter]: Root fs not mounted md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Uncompressing............done. Freeing initrd memory: 573k freed VFS: Mounted root (ext2 filesystem). hdc: no flushcache support scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: LITE-ON Model: LTR-40125S Rev: ZS08 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 12x/48x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 reiserfs: checking transaction log (device 03:02) ... Using r5 hash to sort names ReiserFS version 3.6.25 VFS: Mounted root (reiserfs filesystem) readonly. change_root: old root has d_count=2 Trying to unmount old root ... okay Freeing unused kernel memory: 144k freed hdc: DMA disabled md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. LVM version 1.0.3(19/02/2002) module loaded Adding Swap: 1028120k swap-space (priority 42) Intel(R) PRO/100 Fast Ethernet Adapter - Loadable driver, ver 1.8.37 Copyright (c) 2002 Intel Corporation PCI: Found IRQ 11 for device 02:08.0 eth0: Intel(R) PRO/100 VE Network ConnectionPLC LOM Mem:0xfeaff000 IRQ:11 Speed:100 Mbps Dx:Full Hardware receive checksums enabled usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 14:22:59 Mar 27 2002 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 10 for device 00:1f.2 PCI: Setting latency timer of device 00:1f.2 to 64 usb-uhci.c: USB UHCI at I/O 0xef40, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 9 for device 00:1f.4 PCI: Setting latency timer of device 00:1f.4 to 64 usb-uhci.c: USB UHCI at I/O 0xef80, IRQ 9 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver VFS: Disk change detected on device sr(11,0) VFS: Disk change detected on device sr(11,0) VFS: Disk change detected on device sr(11,0) VFS: Disk change detected on device sr(11,0) VFS: Disk change detected on device sr(11,0) VFS: Disk change detected on device sr(11,0) VFS: Disk change detected on device sr(11,0) VFS: Disk change detected on device sr(11,0) hub.c: USB new device connect on bus2/2, assigned device number 2 hub.c: USB hub found hub.c: 4 ports detected VFS: Disk change detected on device sr(11,0) VFS: Disk change detected on device sr(11,0) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver PCI: Found IRQ 6 for device 00:1f.5 PCI: Sharing IRQ 6 with 00:1f.3 PCI: Setting latency timer of device 00:1f.5 to 64 eth0: no IPv6 routers present intel8x0: clocking to 41131 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). nvidia: loading NVIDIA Linux x86 NVdriver Kernel Module 1.0-3123 Tue Aug 27 15:56:48 PDT 2002 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Detected Intel i850 chipset agpgart: AGP aperture is 64M @ 0xf8000000 NVRM: AGPGART: Intel i850 chipset NVRM: AGPGART: aperture: 64M @ 0xf8000000 NVRM: AGPGART: aperture mapped from 0xf8000000 to 0xe486b000 NVRM: AGPGART: mode 4x NVRM: AGPGART: allocated 16 pages paride: version 1.06 installed (parport) pg: pg version 1.02, major 97 pg0: Autoprobe failed pg: No ATAPI device detected paride: version 1.06 installed (parport) pg: pg version 1.02, major 97 pg0: Autoprobe failed pg: No ATAPI device detected paride: version 1.06 installed (parport) pg: pg version 1.02, major 97 pg0: Autoprobe failed pg: No ATAPI device detected paride: version 1.06 installed (parport) pg: pg version 1.02, major 97 pg0: Autoprobe failed pg: No ATAPI device detected paride: version 1.06 installed (parport) pg: pg version 1.02, major 97 pg0: Autoprobe failed pg: No ATAPI device detected paride: version 1.06 installed (parport) pg: pg version 1.02, major 97 pg0: Autoprobe failed pg: No ATAPI device detected paride: version 1.06 installed (parport) pg: pg version 1.02, major 97 pg0: Autoprobe failed pg: No ATAPI device detected paride: version 1.06 installed (parport) pg: pg version 1.02, major 97 pg0: Autoprobe failed pg: No ATAPI device detected paride: version 1.06 installed (parport) pg: pg version 1.02, major 97 pg0: Autoprobe failed pg: No ATAPI device detected paride: version 1.06 installed (parport) pg: pg version 1.02, major 97 pg0: Autoprobe failed pg: No ATAPI device detected paride: version 1.06 installed (parport) pg: pg version 1.02, major 97 pg0: Autoprobe failed pg: No ATAPI device detected paride: version 1.06 installed (parport) pg: pg version 1.02, major 97 pg0: Autoprobe failed pg: No ATAPI device detected paride: version 1.06 installed (parport) pg: pg version 1.02, major 97 pg0: Autoprobe failed pg: No ATAPI device detected paride: version 1.06 installed (parport) pg: pg version 1.02, major 97 pg0: Autoprobe failed pg: No ATAPI device detected paride: version 1.06 installed (parport) pg: pg version 1.02, major 97 pg0: Autoprobe failed pg: No ATAPI device detected paride: version 1.06 installed (parport) pg: pg version 1.02, major 97 pg0: Autoprobe failed pg: No ATAPI device detected