From: Andreas Koenecke
* Freitag, 12. Juli 2002 um 19:20 (+0200) schrieb Martin Falley:
Ich habe alles gemacht, so wie Du es in Deiner 1. Mail geschrieben hast, aber leider hatte sich nichts geändert.
Was hat sich nicht geändert? Dass du kannst weiterhin keine externen IPs anpingen kannst oder die
Das ist richtig.
Ausgabe von 'route -n'? (Letzteres kann ja eigentlich nicht sein, da
Sieht so aus: pinguin:/home/martin # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 192.168.1.250 255.255.255.0 UG 0 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 pinguin:/home/martin # und Ping sieht so aus: pinguin:/home/martin # ping -c 3 194.162.162.194 PING 194.162.162.194 (194.162.162.194) from 192.168.1.250 : 56(84) bytes of data . --- 194.162.162.194 ping statistics --- 3 packets transmitted, 0 received, 100% loss, time 1999ms pinguin:/home/martin # ping -c 3 ftp.gwdg.de PING ftp.gwdg.de (134.76.11.100) from 192.168.1.250 : 56(84) bytes of data. --- ftp.gwdg.de ping statistics --- 3 packets transmitted, 0 received, 100% loss, time 2011ms Eigenartigerweise muß ich Ping nach einer Weile per Ctrl-C abbrechen, sonst warte ich ewig und es tut sich gar nichts.
in deiner Antwort auf Thomas Fick die Default-Route ja richtig gesetzt wurde...).
Gruß Martin