Hast Du auf dem GW das IP-Forwarding aktiviert? Mit freundlichen Grüßen, -- Timo Dotzauer Systemadministration inovex GmbH Karlsruher Straße 71 D-75179 Pforzheim Tel: +49-(0)72 31 - 31 91 79 Fax: +49-(0)72 31 - 31 91 91 mailto:t.dotzauer@inovex.de http://www.inovex.de
-----Ursprüngliche Nachricht----- Von: Martin Falley [mailto:mailingliste@ebf.biz] Gesendet: Freitag, 12. Juli 2002 13:17 An: suse-linux@suse.com Betreff: RE: Re: Kein ping auf externe Rechner
From: Timo Dotzauer [mailto:tdotzauer@online.de] Sent: Friday, July 12, 2002 12:56 PM To: Martin Falley; suse-linux@suse.com Subject: Re: Kein ping auf externe Rechner
Na, ab in /etc/route.conf
Einfügen "default 192.168.x.x"
Habe ich mal geändert
/etc/route.conf:
# Generated by Webmin 192.168.1.0 0.0.0.0 255.255.255.0 eth0 192.168.1.1 0.0.0.0 255.255.255.255 eth0 192.168.1.1 0.0.0.0 255.255.255.255 default 192.168.1.1
.. und trotzdem (sorry für die zu langen Zeilen):
pinguin:/home/martin # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
pinguin:/home/martin # route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 default nt2000.ebfnet 0.0.0.0 UG 0 0 0 eth0
pinguin:/home/martin # ifstatus eth0 eth0 is up 2: eth0:
mtu 1500 qdisc pfifo_fast qlen 100 link/ether 00:50:da:48:f5:99 brd ff:ff:ff:ff:ff:ff inet 192.168.1.250/24 brd 192.168.1.255 scope global eth0 inet6 fe80::250:daff:fe48:f599/10 scope link Configured routes for interface eth0: 192.168.1.1 192.168.1.255 255.255.255.0 eth0 192.168.114.254 192.168.114.255 255.255.0.0 eth0 default 192.168.1.1 - - Active routes for interface eth0: 192.168.1.0/24 proto kernel scope link src 192.168.1.250 default via 192.168.1.1 0 of 3 configured routes for interface eth0 up pinguin:/home/martin # ping -c 3 194.25.2.132 PING 194.25.2.132 (194.25.2.132) from 192.168.1.250 : 56(84) bytes of data.
--- 194.25.2.132 ping statistics --- 3 packets transmitted, 0 received, 100% loss, time 2010ms
-- Um die Liste abzubestellen, schicken Sie eine Mail an: suse-linux-unsubscribe@suse.com Um eine Liste aller verfügbaren Kommandos zu bekommen, schicken Sie eine Mail an: suse-linux-help@suse.com