Mailinglist Archive: opensuse-da (29 mails)

Next >

---------- Forwarded message ----------
From: Jan Madsen <jan.madsen.pt@xxxxxxxxx>
Date: 2008/11/3
Subject: Re: [opensuse-da] yast - printer.da.po (igen-igen-igen)
To: Martin Schlander <martin.schlander@xxxxxxxxx>

2008/11/3 Martin Schlander <martin.schlander@xxxxxxxxx>:

Grrr... SUSE-firewall.. eller måske skulle man bruge dens korrekte navn
"SuSEfirewall2"

#. Label when the Suse Firewall is not running:
#: src/sharing.ycp:837
-#, fuzzy
msgid "The Suse Firewall is not active"
-msgstr "Serveren '%1' er ikke tilgængelig."
+msgstr "Suse-Firewall er ikke aktiv"

Samme
--

Der står nu SuSEfirewall2 begge steder (og der er ikke flere)

Jan
# translation of printer.po to dansk
# translation of printer.po to
# translation of printer.da.po to
# translation of printer.da.po to
# Danish message file for YaST2 (@memory@).
# Copyright (C) 2002 SuSE Linux AG.
# Copyright (C) 2002 SuSE GmbH.
#
# Olav Pettershagen <olav.pet@xxxxxxxxx>, 2004.
# Olav Pettershagen <olav.pettershagen@xxxxxxxxxxxxxxxx>, 2004.
# Keld Simonsen <keld@xxxxxxxx>, 2004.
# Martin Schlander <suse@xxxxxxxxxx>, 2006, 2007.
# Jan Madsen <jan.madsen.pt(a)gmail.com>, 2006.
# Martin Moeller <martin@xxxxxxxxxxxxx>, 2006.
# Jan Madsen <jan.madsen.pt@xxxxxxxxx>, 2008.
# Martin Schlander <mschlander@xxxxxxxxxxxx>, 2008.
msgid ""
msgstr ""
"Project-Id-Version: printer\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2008-10-30 14:40+0100\n"
"PO-Revision-Date: 2008-11-03 21:30+0000\n"
"Last-Translator: Jan Madsen <jan.madsen.pt@xxxxxxxxx>\n"
"Language-Team: dansk <opensuse-translation@xxxxxxxxxxxx>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Generator: KBabel 1.11.4\n"

#. Header of a DownloadProgress indicator:
#. Busy message:
#. Body of a Popup::ShowFeedback:
#: src/Printer.ycp:294 src/Printer.ycp:309
msgid "Retrieving printer driver information..."
msgstr "Henter information om printer-drivere..."

#. Popup::ErrorDetails message.
#. Only a simple message because this error does not happen on a normal system
#. (i.e. a system which is not totally broken or totally messed up).
#: src/Printer.ycp:322
msgid "Failed to create PPD database."
msgstr "Oprettelse af PPD-database fejlede."

#. Message of a Popup::Error where %1 will be replaced by the file name.
#. Only a simple message because this error does not happen on a normal system
#. (i.e. a system which is not totally broken or totally messed up).
#: src/Printer.ycp:338 src/Printer.ycp:461 src/Printer.ycp:540
#: src/Printer.ycp:600
#, ycp-format
msgid "File %1 does not exist."
msgstr "Filen %1 findes ikke."

#. Message of a Popup::Error where %1 will be replaced by the file name.
#. Only a simple message because this error does not happen on a normal system
#. (i.e. a system which is not totally broken or totally messed up).
#: src/Printer.ycp:356 src/Printer.ycp:479 src/Printer.ycp:552
#: src/Printer.ycp:612
#, ycp-format
msgid "Failed to read %1."
msgstr "LÃ¦sning af %1 fejlede."

#. Header for a finished ProgressBar:
#: src/Printer.ycp:379
msgid "Retrieved printer driver information"
msgstr "Hentede information om printer-drivere"

#. Header of a DownloadProgress indicator:
#. Busy message:
#. Body of a Popup::ShowFeedback:
#: src/Printer.ycp:413 src/Printer.ycp:430
msgid "Detecting printers..."
msgstr "SÃ¸ger efter printere..."

#. Popup::ErrorDetails message.
#. Only a simple message because this error does not happen on a normal system
#. (i.e. a system which is not totally broken or totally messed up).
#. Do not confuse this error with the case when no printer was autodetected.
#. The latter results no error.
#: src/Printer.ycp:445
msgid "Failed to detect printers automatically."
msgstr "Automatisk sÃ¸gning efter printere fejlede."

#
#. Header for a finished ProgressBar:
#: src/Printer.ycp:493
msgid "Detected printers"
msgstr "Fundne printere"

#
#. Popup::ErrorDetails message.
#. Only a simple message because this error does not happen on a normal system
#. (i.e. a system which is not totally broken or totally messed up).
#. Do not confuse this error with the case when no queue was detected
#. (e.g. simply because there is no queue). This results no error.
#: src/Printer.ycp:530
msgid "Failed to detect print queues."
msgstr "SÃ¸gning efter udskriftskÃ¸er fejlede."

#. Popup::ErrorDetails message where %1 will be replaced by the queue name.
#. Only a simple message because this error does not happen on a normal system
#. (i.e. a system which is not totally broken or totally messed up).
#. Do not confuse this error with the case when no queue was detected
#. (e.g. simply because there is no queue). This results no error.
#: src/Printer.ycp:588
#, ycp-format
msgid "Failed to determine driver options for queue %1."
msgstr "Bestemmelse af driver-valgmuligheder for kÃ¸en %1 fejlede."

#
#. Define the progress stages:
#. Header of a Progress::New:
#: src/Printer.ycp:632
msgid "Initializing Printer Configuration"
msgstr "Initialiserer printerkonfiguration"

#. 1. progress stage name of a Progress::New:
#: src/Printer.ycp:636
msgid "Check installed packages"
msgstr "Tjek installerede pakker"

#. 1. progress step progress bar title of a Progress::New:
#: src/Printer.ycp:639
msgid "Checking installed packages..."
msgstr "Tjekker installerede pakker..."

#. Last progress step progress bar title of a Progress::New:
#: src/Printer.ycp:641 src/Printer.ycp:709
msgid "Finished"
msgstr "FÃ¦rdig"

#
#. Define the progress stages:
#. Header of a Progress::New:
#: src/Printer.ycp:700
msgid "Finishing Printer Configuration"
msgstr "FÃ¦rdiggÃ¸r printerkonfiguration"

#
#. 1. progress stage name of a Progress::New:
#: src/Printer.ycp:704
msgid "Finish printer configuration"
msgstr "FÃ¦rdiggÃ¸r printerkonfiguration"

#
#. 1. progress step progress bar title of a Progress::New:
#: src/Printer.ycp:707
msgid "Finishing printer configuration..."
msgstr "FÃ¦rdiggÃ¸r printerkonfiguration..."

#
#. Message of a Popup::Error.
#. Only a simple message because this error does not happen on a normal system
#. (i.e. a system which is not totally broken or totally messed up).
#. Do not confuse this error with the case when no queue was detected
#. (e.g. simply because there is no queue). This results no error.
#: src/Printer.ycp:805
msgid "Cannot show print queues (failed to detect print queues)."
msgstr "Kan ikke vise udskriftskÃ¸er (sÃ¸gning efter udskriftskÃ¸er fejlede)."

#. When the queue configuration exists on the local host:
#: src/Printer.ycp:829
msgid "Local"
msgstr "Lokal"

#. When the queue configuration exists on a remote machine:
#: src/Printer.ycp:833
msgid "Remote"
msgstr "Ekstern"

#. When the queue is the default queue on the local host:
#: src/Printer.ycp:837
msgid "Yes"
msgstr "Ja"

#
#. When the queue accepts print jobs and printing is enabled:
#: src/Printer.ycp:840
msgid "Ready"
msgstr "Klar"

#. When printing is disabled for the queue:
#: src/Printer.ycp:843
msgid "Printout disabled"
msgstr "Udskrift deaktiveret"

#. When the queue rejects print jobs and printing is disabled:
#: src/Printer.ycp:848
msgid "Rejecting print jobs, printout disabled"
msgstr "Afviser udskriftsjobs - udskrift deaktiveret"

#
#. When the queue rejects print jobs:
#: src/Printer.ycp:852
msgid "Rejecting print jobs"
msgstr "Afviser udskriftsjobs"

#. Show a fallback text if there are no local queues:
#: src/Printer.ycp:876
msgid "There is no print queue."
msgstr "Der er ingen udskriftskÃ¸."

#
#. Message of a Popup::Error.
#. Only a simple message because before the function AutodetectPrinters
#. was called and this function would have shown more specific messages.
#: src/Printer.ycp:914
msgid "Failed to autodetect printers."
msgstr "Automatisk sÃ¸gning efter printere fejlede."

#
#. Message of a Popup::Error.
#. Only a simple message because before the function CreateDatabase
#. was called and this function would have shown more specific messages.
#: src/Printer.ycp:1187
msgid "Failed to create the printer driver database."
msgstr "Oprettelse af printer-driver-databasen fejlede."

#. If no driver was already selected, show a meaningful text as
#. fallback entry for a SelectionBox when no connection is selected.
#. It will be replaced by real content, when a connection is selected.
#: src/Printer.ycp:1212
msgid "Select a connection, then matching drivers show up here."
msgstr "VÃ¦lg en tilslutning, sÃ¥ vises passende drivere her."

#. Busy message:
#. Body of a Popup::ShowFeedback:
#: src/Printer.ycp:1224
msgid "Determine available drivers..."
msgstr "Bestem tilgÃ¦ngelige drivere..."

#. If the driver_items list is empty (e.g. because of a too restrictive
driver_filter_string),
#. show a meaningful text as fallback entry.
#: src/Printer.ycp:1258
msgid "No matching driver found. Try 'More Drivers' or 'All Drivers'."
msgstr "Ingen passende driver fundet. PrÃ¸v 'Flere drivere' eller 'Alle
drivere'."

#. Busy message:
#. Body of a Popup::ShowFeedback:
#: src/Printer.ycp:1277
msgid "Processing many drivers. Please wait..."
msgstr "Behandler mange drivere. Vent venligst..."

#. Message of a Popup::Error.
#. Only a simple message because this is only a fallback case
#. which should not happen at all:
#: src/Printer.ycp:1673
msgid "Failed to determine the driver options."
msgstr "Bestemmelse af driver-valgmulighederne fejlede."

#
#. Return at least a list with only a fallback string so that the user is
informed:
#. Header of a Popup::AnyMessage when "Driver Options" was selected:
#: src/Printer.ycp:1676 src/Printer.ycp:1791 src/basicmodify.ycp:540
msgid "No driver options available"
msgstr "Ingen tilgÃ¦ngelige driver-valgmuligheder"

#. Dummy info for a currently selected item:
#: src/Printer.ycp:1729
msgid "currently selected"
msgstr "nuvÃ¦rende valgt"

#
#. Info when a currently selected item is already set:
#: src/Printer.ycp:1732
msgid "current setting of the print queue"
msgstr "nuvÃ¦rende opsÃ¦tning af udskriftskÃ¸en"

#. Message of a Popup::Error.
#. Only a simple message because this error does not happen on a normal system.
#: src/Printer.ycp:1979
msgid ""
"Failed to set up the firewall settings.\n"
"Use the specific YaST Firewall module."
msgstr ""
"OpsÃ¦tning af firewall-indstillinger fejlede.\n"
"Brug det specifikke YaST Firewall-modul."

#. Message of a Popup::Error where %1 will be replaced by the package name:
#: src/Printerlib.ycp:114
#, ycp-format
msgid "Required package %1 is not installed and there is no package repository
available."
msgstr "Den krÃ¦vede pakke %1 er ikke installeret, og der er ingen
softwarekilde tilgÃ¦ngelig."

#. Message of a Popup::Error where %1 will be replaced by the package name:
#: src/Printerlib.ycp:123
#, ycp-format
msgid "Required package %1 is not installed and not available in the
repository."
msgstr "Den krÃ¦vede pakke %1 er ikke installeret, og den er ikke tilgÃ¦ngelig
pÃ¥ softwarekilden."

#. Message of a Popup::Error where %1 will be replaced by the package name.
#. Only a simple message because:
#. Either the user has explicitely rejected to install the package,
#. or this error does not happen on a normal system
#. (i.e. a system which is not totally broken or totally messed up).
#: src/Printerlib.ycp:136
#, ycp-format
msgid "Failed to install required package %1."
msgstr "Installation af den krÃ¦vede pakke %1 fejlede."

#. Message of a Popup::Error where %1 will be replaced by the package name.
#. Only a simple message because:
#. Either the user has explicitely rejected to remove the package,
#. or this error does not happen on a normal system
#. (i.e. a system which is not totally broken or totally messed up).
#: src/Printerlib.ycp:155
#, ycp-format
msgid "Failed to remove package %1."
msgstr "Fjernelse af pakken %1 fejlede."

#. Enforce user confirmation before a new service is started
#. to be on the safe side that the user knows about it:
#. PopupYesNoHeadline headline:
#: src/Printerlib.ycp:184
msgid "Start local running CUPS daemon"
msgstr "Start lokalt kÃ¸rende CUPS-dÃ¦mon"

#. PopupYesNoHeadline body:
#: src/Printerlib.ycp:186
msgid "A local running CUPS daemon is needed."
msgstr "En lokalt kÃ¸rende CUPS-dÃ¦mon er nÃ¸dvendig."

#. Popup::ErrorDetails message:
#: src/Printerlib.ycp:193
msgid "Failed to start the CUPS daemon"
msgstr "Start af CUPS-dÃ¦monen fejlede"

#. Wait half a minute for a new started cupsd is necessary because
#. when a client-only config is switched to a "get Browsing info" config
#. the BrowseInterval in cupsd.conf on remote CUPS servers is by default 30
seconds
#. so that the local cupsd should listen at least 31 seconds to get Browsing
info
#. before e.g. the Overview dialog can be shown with the right current queues.
#: src/Printerlib.ycp:205
msgid ""
"Started the CUPS daemon.\n"
"Waiting half a minute so that it is ready to operate..."
msgstr ""
"Startede CUPS-dÃ¦monen.\n"
"Venter et halvt minut, sÃ¥ den er klar til at kÃ¸re..."

#. It can take up to a few minutes when a cupsd is started
#. for the very first time (e.g. on a new installed system)
#. until the cupsd is actually ready to operate.
#. E.g. because parsing of thousands of PPDs may need much time.
#. Therefore enforce waiting one minute now.
#. (Plain busy message without title.)
#: src/Printerlib.ycp:216
msgid ""
"The CUPS daemon in not yet accessible.\n"
"Waiting one minute so that it is ready to operate..."
msgstr ""
"CUPS-dÃ¦monen er endnu ikke tilgÃ¦ngelig.\n"
"Venter et minut, sÃ¥ den er klar til at kÃ¸re..."

#. Popup::Error message:
#: src/Printerlib.ycp:223 src/Printerlib.ycp:271
msgid "No local running CUPS daemon is accessible."
msgstr "Ingen lokalt kÃ¸rende CUPS-dÃ¦mon er tilgÃ¦ngelig."

#. Popup::ErrorDetails message:
#: src/Printerlib.ycp:229 src/Printerlib.ycp:286
msgid "Failed to enable starting of the CUPS daemon during system boot"
msgstr "Aktivering af start af CUPS-dÃ¦mon under system-boot fejlede"

#. Enforce user confirmation before the cupsd is restarted
#. to be on the safe side regarding complaints in an enterprise environment
#. because a restart disrupts all currently actively printing jobs:
#. PopupYesNoHeadline headline:
#: src/Printerlib.ycp:242
msgid "Restart local running CUPS daemon"
msgstr "Genstart lokalt kÃ¸rende CUPS-dÃ¦mon"

#. PopupYesNoHeadline body:
#: src/Printerlib.ycp:244
msgid "A restart disrupts all currently actively printing jobs."
msgstr "En genstart afbryder alle nuvÃ¦rende aktive udskriftsjobs."

#. Popup::ErrorDetails message:
#: src/Printerlib.ycp:251
msgid "Failed to restart the CUPS daemon"
msgstr "Genstart af CUPS-dÃ¦monen fejlede"

#. Wait half a minute for a restarted cupsd is necessary because
#. when a "no Browsing info" config is switched to a "get Browsing info" config
#. the BrowseInterval in cupsd.conf on remote CUPS servers is by default 30
seconds
#. so that the local cupsd should listen at least 31 seconds to get Browsing
info
#. before e.g. the Overview dialog can be shown with the right current queues.
#: src/Printerlib.ycp:265
msgid ""
"Restarted the CUPS daemon.\n"
"Waiting half a minute so that it is ready to operate..."
msgstr ""
"Genstartede CUPS-dÃ¦monen.\n"
"Venter et halvt minut, sÃ¥ den er klar til at kÃ¸re..."

#. PopupYesNoHeadline headline:
#: src/Printerlib.ycp:279
msgid "Enable starting of the CUPS daemon during system boot"
msgstr "AktivÃ©r start af CUPS-dÃ¦monen under system-boot"

#. PopupYesNoHeadline body:
#: src/Printerlib.ycp:281
msgid "Currently the CUPS daemon is not started during system boot."
msgstr "CUPS-dÃ¦monen startes i Ã¸jeblikket ikke under system-boot."

#. Enforce user confirmation before the cupsd is stopped
#. to be on the safe side regarding complaints in an enterprise environment
#. because a stop disrupts all currently actively printing jobs:
#. PopupYesNoHeadline headline:
#: src/Printerlib.ycp:301
msgid "Stop local running CUPS daemon"
msgstr "Stop lokalt kÃ¸rende CUPS-dÃ¦mon"

#. PopupYesNoHeadline body:
#: src/Printerlib.ycp:303
msgid "A stop disrupts all currently actively printing jobs."
msgstr "Et stop afbryder alle nuvÃ¦rende aktive udskriftjobs."

#. Popup::Error message:
#: src/Printerlib.ycp:319
msgid "A local running CUPS daemon is still accessible."
msgstr "En lokalt kÃ¸rende CUPS-dÃ¦mon er stadig tilgÃ¦ngelig."

#. When there is a non-empty client_conf_server_name,
#. cups_client_only fails when the client-only server is not accessible:
#. Popup::ErrorDetails message
#. where %1 will be replaced by the server name.
#: src/Printerlib.ycp:365
#, ycp-format
msgid "The CUPS server '%1' is not accessible"
msgstr "CUPS-serveren '%1' er ikke tilgÃ¦ngelig"

#. Header for a dialog section where the user can
#. specify in which way USB printers are configured automatically:
#: src/autoconfig.ycp:53
msgid "Specify in which way USB printers are configured automatically"
msgstr "Angiv pÃ¥ hvilken mÃ¥de USB-printere konfigureres automatisk"

#. CheckBox to have no automatic configuration of USB printers at all
#. by removing the cups-autoconfig RPM package.
#. Do not change or translate "cups-autoconfig", it is a RPM package name.
#: src/autoconfig.ycp:72
msgid "No Automatic Configuration at all: &Remove the cups-autoconfig package."
msgstr "Ingen automatisk konfiguration overhovedet: Fje&rn pakken
cups-autoconfig ."

#
#. CheckBox to enable that a print queue is automatically created
#. when a USB printer is connected for the first time to the USB:
#: src/autoconfig.ycp:83
msgid "Enable &Automatic Configuration of New Attachend USB Printers"
msgstr "AktivÃ©r &automatisk konfiguration af nytilsluttede USB-printere"

#. CheckBox to disable the print queue
#. when a USB printer is disconnected from the USB:
#: src/autoconfig.ycp:91
msgid "&Disable Printout when Disconnecting an USB Printer"
msgstr "&DeaktivÃ©r udskrift nÃ¥r USB-printer frakobles"

#. Header for a ComboBox to specify the CUPS operation policy
#. for print queues which are automatically created
#. when a USB printer is connected for the first time to the USB:
#: src/autoconfig.ycp:100
msgid "Operation &Policy for Automatically Configured USB Printers"
msgstr "Handlings&politik for automatisk konfigurerede USB-printere"

#
#. Message of a Popup::ShowFeedback when nothing was changed:
#: src/autoconfig.ycp:227 src/basicmodify.ycp:518 src/driveradd.ycp:213
#: src/policies.ycp:233 src/printingvianetwork.ycp:854 src/sharing.ycp:1079
msgid "Nothing changed."
msgstr "Intet Ã¦ndret."

#. Popup::ErrorDetails message
#. Do not change or translate "ConfigureNewPrinters=yes", it is a system
settings name.
#: src/autoconfig.ycp:239
msgid "Failed to set 'ConfigureNewPrinters=yes' in /etc/cups-autoconfig.conf"
msgstr "Mislykkedes at sÃ¦tte 'ConfigureNewPrinters=yes' i
/etc/cups-autoconfig.conf"

#. Popup::ErrorDetails message
#. Do not change or translate "ConfigureNewPrinters=no", it is a system
settings name.
#: src/autoconfig.ycp:249
msgid "Failed to set 'ConfigureNewPrinters=no' in /etc/cups-autoconfig.conf"
msgstr "Mislykkedes at sÃ¦tte 'ConfigureNewPrinters=no' i
/etc/cups-autoconfig.conf"

#. Popup::ErrorDetails message
#. Do not change or translate "DisablePrintersOnRemoval=yes", it is a system
settings name.
#: src/autoconfig.ycp:261
msgid "Failed to set 'DisablePrintersOnRemoval=yes' in
/etc/cups-autoconfig.conf"
msgstr "Mislykkedes at sÃ¦tte 'DisablePrintersOnRemoval=yes' i
/etc/cups-autoconfig.conf"

#. Popup::ErrorDetails message
#. Do not change or translate "DisablePrintersOnRemoval=no", it is a system
settings name.
#: src/autoconfig.ycp:271
msgid "Failed to set 'DisablePrintersOnRemoval=no' in /etc/cups-autoconfig.conf"
msgstr "Mislykkedes at sÃ¦tte 'DisablePrintersOnRemoval=no' i
/etc/cups-autoconfig.conf"

#. Popup::ErrorDetails message
#. where %1 will be replaced by the cups-autoconfig error policy value.
#. Do not change or translate "DefaultCUPSPolicy", it is a system settings name.
#: src/autoconfig.ycp:289
#, ycp-format
msgid "Failed to set 'DefaultCUPSPolicy=%1' in /etc/cups-autoconfig.conf"
msgstr "Mislykkedes at sÃ¦tte 'DefaultCUPSPolicy=%1' i
/etc/cups-autoconfig.conf"

#. Popup::Error message:
#: src/autoconfig.ycp:299 src/policies.ycp:317 src/printingvianetwork.ycp:846
#: src/sharing.ycp:1071
msgid "Failed to apply the settings to the system."
msgstr "Anvendelse af indstillingen pÃ¥ systemet fejlede."

#
#. Caption for the "Add Printer" dialog (BasicAddDialog):
#: src/basicadd.ycp:48
msgid "Add New Printer Configuration"
msgstr "TilfÃ¸j ny printerkonfiguration"

#. Caption for a Table with a list of printer connections:
#: src/basicadd.ycp:67
msgid "Determine Connection"
msgstr "Bestem tilslutning"

#. Header of a Table column with a list of printer connections.
#. Printer model name:
#. Headers of a Table with a list of printer connections:
#. Header of a Table column with a list of printer connections.
#. Printer model name:
#: src/basicadd.ycp:84 src/basicadd.ycp:291 src/basicmodify.ycp:267
#: src/basicmodify.ycp:577 src/connectionwizard.ycp:34
msgid "Model"
msgstr "Model"

#. Header of a Table column with a list of printer connections.
#. Connection of the printer (e.g. via USB or via parallel port):
#. Caption for a Table with a list of printer connections:
#. Header of a Table column with a list of printer connections.
#. Connection of the printer (e.g. via USB or via parallel port):
#: src/basicadd.ycp:87 src/basicadd.ycp:294 src/basicmodify.ycp:250
#: src/basicmodify.ycp:270 src/basicmodify.ycp:580 src/connectionwizard.ycp:37
msgid "Connection"
msgstr "Tilslutning"

#. Header of a Table column with a list of printer connections.
#. Additional description of the printer or its particular connection:
#. Header of a Table column with a list of print queues.
#. Print queue description (e.g. model or driver):
#: src/basicadd.ycp:90 src/basicadd.ycp:297 src/basicmodify.ycp:273
#: src/basicmodify.ycp:583 src/connectionwizard.ycp:40 src/overview.ycp:92
msgid "Description"
msgstr "Beskrivelse"

#. Label of a PushButton to show more available printer connections
#. in the Table with a list of printer connections:
#: src/basicadd.ycp:101 src/basicmodify.ycp:284
msgid "&More Connections"
msgstr "F&lere tilslutninger"

#. Label of a PushButton to go to the "Connection Wizard"
#. to specify the printer connection individually:
#: src/basicadd.ycp:107 src/basicmodify.ycp:290 src/printingvianetwork.ycp:174
msgid "Connection &Wizard"
msgstr "Tilslutnings&guide"

#. Caption for a printer driver selection:
#: src/basicadd.ycp:120 src/basicadd.ycp:348 src/basicadd.ycp:399
msgid "Assign &Driver"
msgstr "Tildel &driver"

#. Label of a PushButton to search a list for a search string
#. and then show the search result:
#: src/basicadd.ycp:135 src/basicmodify.ycp:318
msgid "&Show Matching Drivers"
msgstr "&Vis passende drivere"

#
#. Body of a Popup::AnyMessage when no driver was selected:
#: src/basicadd.ycp:148 src/basicadd.ycp:213 src/basicadd.ycp:378
#: src/basicmodify.ycp:737
msgid "Select a driver."
msgstr "VÃ¦lg en driver."

#. Label of a PushButton to go to the "Add Driver" dialog
#. to install a new driver (and perhaps download it before):
#: src/basicadd.ycp:156 src/basicmodify.ycp:346
msgid "&Add Driver"
msgstr "&TilfÃ¸j driver"

#. Header of a TextEntry to enter the queue name:
#: src/basicadd.ycp:167 src/basicadd.ycp:366
msgid "Set &Name"
msgstr "Angiv &navn"

#. Set a different label for the "next" button
#. (i.e. the lower right button which results `next as UI::UserInput).
#. This button finishes the "add" procedure:
#: src/basicadd.ycp:181
msgid "&Finish Add"
msgstr "&FÃ¦rdiggÃ¸r tilfÃ¸jelse"

#. Header of a Popup::AnyMessage when neither a connection
#. nor a driver was selected:
#. Header of a Popup::AnyMessage when no queue was selected from the list:
#: src/basicadd.ycp:194 src/overview.ycp:239 src/overview.ycp:286
#: src/overview.ycp:380
msgid "Nothing Selected"
msgstr "Intet valgt"

#. Body of a Popup::AnyMessage when neither a connection
#. nor a driver was selected:
#: src/basicadd.ycp:197
msgid "Select a connection and then assign a driver."
msgstr "VÃ¦lg en tilslutning, og tildel sÃ¥ en driver."

#. Header of a Popup::AnyMessage when no connection was selected:
#: src/basicadd.ycp:203 src/basicadd.ycp:309 src/basicmodify.ycp:597
msgid "No Connection Selected"
msgstr "Ingen tilslutning valgt"

#
#. Body of a Popup::AnyMessage when no connection was selected:
#: src/basicadd.ycp:205 src/basicadd.ycp:311 src/basicmodify.ycp:599
msgid "Select a connection."
msgstr "VÃ¦lg en tilslutning."

#
#. Header of a Popup::AnyMessage when no driver was selected:
#: src/basicadd.ycp:211 src/basicadd.ycp:376 src/basicmodify.ycp:735
msgid "No Driver Selected"
msgstr "Ingen driver valgt"

#
#. Header of a Popup::AnyMessage when no queue name was entered:
#: src/basicadd.ycp:220
msgid "No Queue Name"
msgstr "Intet navn pÃ¥ kÃ¸"

#. Body of a Popup::AnyMessage when no queue name was entered:
#: src/basicadd.ycp:222
msgid "Enter a queue name."
msgstr "Angiv et navn pÃ¥ kÃ¸en."

#
#. Header of a Popup::AnyMessage when a wrong queue name was entered:
#: src/basicadd.ycp:228
msgid "Invalid Queue Name"
msgstr "Ugyldigt navn pÃ¥ kÃ¸"

#. Body of a Popup::AnyMessage when a wrong queue name was entered:
#: src/basicadd.ycp:230
msgid "Only letters [A-Za-z], numbers [0-9], and '_' are allowed for the queue
name."
msgstr "Kun bogstaver [A-Z a-z], tal [0-9] og '_' tillades i navnet pÃ¥ kÃ¸en."

#
#. Header of a Popup::ContinueCancelHeadline
#. when a queue name is changed to be valid:
#: src/basicadd.ycp:238
msgid "Confirm Validated Queue Name"
msgstr "BekrÃ¦ft valideret navn pÃ¥ kÃ¸"

#. Body of a Popup::ContinueCancelHeadline
#. when a queue name was automatically changed to be valid
#. where %1 will be replaced by the old invalid queue name
#. and %2 will be replaced by a new valid queue name
#: src/basicadd.ycp:243
#, ycp-format
msgid "'%1' is invalid or it exists already. Use '%2' instead?"
msgstr "'%1' er ugyldigt eller eksisterer allerede. Vil du bruge '%2' i stedet?"

#. Message of a Popup::Error
#. where %1 will be replaced by the queue name.
#. Only a simple message because before the function Printer::AddQueue
#. was called and this function would have shown more specific messages.
#: src/basicadd.ycp:259
#, ycp-format
msgid "Failed to add queue %1."
msgstr "TilfÃ¸jelse af kÃ¸en %1 fejlede."

#
#: src/basicadd.ycp:394 src/basicmodify.ycp:784
msgid "any model"
msgstr "enhver model"

#. Title of the Basic Modify Dialog where %1 will be replaced by the queue name.
#. The actual queue name is a system value which cannot be translated:
#: src/basicmodify.ycp:67
#, ycp-format
msgid "Modify %1"
msgstr "Ãndr %1"

#
#. Label of a PushButton to go to a dialog
#. to set all available options for the printer driver
#. which is currently used for a print queue:
#: src/basicmodify.ycp:108
msgid "All &Options for the Current Driver"
msgstr "Alle valgmuligheder f&or denne driver"

#
#: src/basicmodify.ycp:177
msgid "Default Paper Size of the Current Driver"
msgstr "StandardpapirstÃ¸rrelse for denne driver"

#: src/basicmodify.ycp:221
msgid "Current Connection"
msgstr "NuvÃ¦rende tilslutning"

#. Do not change or translate "raw", it is a technical term when no driver is
used.
#. Do not change or translate "System V style interface script", it is a
technical term.
#: src/basicmodify.ycp:237
msgid "No driver is used (it is a 'raw' queue or a 'System V style interface
script' is used)"
msgstr "Ingen driver anvendes (det er en 'rÃ¥' kÃ¸, eller 'System V style
interface script' benyttes)"

#: src/basicmodify.ycp:242
msgid "Current Driver"
msgstr "NuvÃ¦rende driver"

#. Caption for a printer driver selection:
#: src/basicmodify.ycp:303 src/basicmodify.ycp:671 src/basicmodify.ycp:789
msgid "Driver"
msgstr "Driver"

#. Label of a TextEntry for a short printer driver description (only one line):
#: src/basicmodify.ycp:357
msgid "Descri&ption"
msgstr "&Beskrivelse"

#. Label of a TextEntry for printer location string:
#: src/basicmodify.ycp:365
msgid "&Location"
msgstr "P&lacering"

#. CheckBox to set a local print queue to be the default queue:
#: src/basicmodify.ycp:374
msgid "&Default Printer"
msgstr "Stan&dardprinter"

#. CheckBox to set a local print queue to accept print jobs:
#: src/basicmodify.ycp:381
msgid "Accept Print &Jobs"
msgstr "AcceptÃ©r udskrifts&jobs"

#. CheckBox to enable printing for a local print queue:
#: src/basicmodify.ycp:388
msgid "&Enable Printing"
msgstr "&AktivÃ©r udskrift"

#. Set a different label for the "next" button
#. (i.e. the lower right button which results `next as UI::UserInput).
#. This button finishes the "add" procedure:
#: src/basicmodify.ycp:402
msgid "&Finish Modify"
msgstr "&FÃ¦rdiggÃ¸r Ã¦ndring"

#
#. Message of a Popup::Error
#. where %1 will be replaced by the queue name.
#. Only a simple message because this error does not happen on a normal system
#. (i.e. a system which is not totally broken or totally messed up).
#: src/basicmodify.ycp:507
#, ycp-format
msgid "Failed to modify %1."
msgstr "Ãndring af %1 fejlede."

#. Body of a Popup::AnyMessage when "Driver Options" was selected:
#: src/basicmodify.ycp:542
msgid "Possible reasons: Nothing selected or it is a remote configuration."
msgstr "Mulige Ã¥rsager: Intet valgt, eller det er en ekstern konfiguration."

#. TRANSLATORS: Button to test remote printer machine
#: src/connectionwizard.ycp:46 src/connectionwizard.ycp:74
#: src/connectionwizard.ycp:136 src/connectionwizard.ycp:159
#: src/connectionwizard.ycp:176
msgid "&Test Connection"
msgstr "&Test tilslutning"

#. TRANSLATORS: Button to add not detected printer queue
#: src/connectionwizard.ycp:48
msgid "Other"
msgstr "Andre"

#. TRANSLATORS: Text entry to fill IP or hostname of remote server
#. TRANSLATORS: Text entry for IP or hostname of remote server
#: src/connectionwizard.ycp:62 src/connectionwizard.ycp:147
#: src/connectionwizard.ycp:165
msgid "IP Address or Host Name"
msgstr "IP-adresse eller vÃ¦rtsnavn"

#. TRANSLATORS: Label for menu to search for remote servers
#: src/connectionwizard.ycp:64 src/connectionwizard.ycp:149
msgid "Look Up"
msgstr "SÃ¸g efter"

#
#. TRANSLATORS: Buttonto search for remote servers
#: src/connectionwizard.ycp:68 src/connectionwizard.ycp:153
msgid "Look Up for All Hosts"
msgstr "SÃ¸g efter alle vÃ¦rtsmaskiner"

#. TRANSLATORS: List of input field labels, first for network scan button
#: src/connectionwizard.ycp:107
msgid "Scan for Direct Socket Servers"
msgstr "SÃ¸g efter Direct Socket-servere"

#: src/connectionwizard.ycp:107
msgid "TCP Port Number"
msgstr "TCP-portnummer"

#
#. TRANSLATORS: List of input field labels, first for network scan button,
second for name of printer queue
#: src/connectionwizard.ycp:111 src/connectionwizard.ycp:141
msgid "Scan for LPD Servers"
msgstr "SÃ¸g efter LPD-servere"

#: src/connectionwizard.ycp:111
msgid "Queue Name (see the printer's manual)"
msgstr "Navn pÃ¥ kÃ¸ (se printerens manual)"

#. TRANSLATORS: Input field label
#: src/connectionwizard.ycp:116
msgid "URI (see the printer's manual)"
msgstr "URI (se printerens manual)"

#. TRANSLATORS: Text entry for remote server name
#: src/connectionwizard.ycp:123
msgid "Server (NetBIOS Host Name)"
msgstr "Server (NetBIOS-vÃ¦rtsnavn)"

#
#. TRANSLATORS: Text entry for printer name
#: src/connectionwizard.ycp:125
msgid "Printer (Share Name)"
msgstr "Printer (navn pÃ¥ deling)"

#. TRANSLATORS: Text entry for samba domain
#: src/connectionwizard.ycp:127
msgid "Workgroup (Domain Name)"
msgstr "Arbejdsgruppe (domÃ¦nenavn)"

#. TRANSLATORS: Frame label for authentication
#: src/connectionwizard.ycp:129 src/connectionwizard.ycp:169
msgid "Authenticate As"
msgstr "Godkend som"

#. TRANSLATORS: Text entry for username (authentication)
#: src/connectionwizard.ycp:131 src/connectionwizard.ycp:171
msgid "User"
msgstr "Bruger"

#. TRANSLATORS: Text entry for password (authentication)
#: src/connectionwizard.ycp:133 src/connectionwizard.ycp:173
msgid "&Password"
msgstr "&Adgangskode"

#. TRANSLATORS: Text entry for name of remote printer queue
#: src/connectionwizard.ycp:141 src/connectionwizard.ycp:157
#: src/connectionwizard.ycp:167
msgid "Queue Name"
msgstr "Navn pÃ¥ kÃ¸"

#
#: src/connectionwizard.ycp:151
msgid "Scan for IPP Servers"
msgstr "SÃ¸g efter IPP-servere"

#: src/connectionwizard.ycp:152
msgid "Scan for IPP Broadcasts"
msgstr "SÃ¸g efter IPP-broadcasts"

#. TRANSLATORS: Text entry for URI (Uniform Resource Identifier)
#: src/connectionwizard.ycp:183
msgid "URI (Uniform Resource Identifier)"
msgstr "URI (Uniform Resource Identifier)"

#
#. TRANSLATORS: Text entry for program name that will be called via pipe
#: src/connectionwizard.ycp:189
msgid "Program Name"
msgstr "Programnavn"

#. TRANSLATORS: Text entry for device URI (Uniform Resource Identifier)
#: src/connectionwizard.ycp:195
msgid "Device URI (for which 'beh' should be applied)"
msgstr "Enheds-URI (for hvilket 'beh' bÃ¸r anvendes)"

#. TRANSLATORS: Check box
#: src/connectionwizard.ycp:197
msgid "Never Disable the Queue"
msgstr "DeaktivÃ©r aldrig kÃ¸en"

#. TRANSLATORS: Text entry
#: src/connectionwizard.ycp:199
msgid "Number of Retries ('0' means infinite retries)"
msgstr "Antal genforsÃ¸g ('0' betyder uendelige genforsÃ¸g)"

#. TRANSLATORS: Text entry
#: src/connectionwizard.ycp:201
msgid "Delay in Seconds Between Two Retries"
msgstr "Forsinkelse i sekunder mellem to genforsÃ¸g"

#. TRANSLATORS: Label for tree widget description
#: src/connectionwizard.ycp:222
msgid "&Connection Type"
msgstr "&Tilslutningstype"

#
#. TRANSLATORS: Tree widget item
#: src/connectionwizard.ycp:225
msgid "Directly Connected Device"
msgstr "Direkte tilsluttet enhed"

#. TRANSLATORS: Tree widget item
#: src/connectionwizard.ycp:228
msgid "Parallel Port"
msgstr "Parallelport"

#. TRANSLATORS: Tree widget item
#: src/connectionwizard.ycp:230
msgid "USB Port"
msgstr "USB-port"

#
#. TRANSLATORS: Tree widget item
#: src/connectionwizard.ycp:232
msgid "Serial Port"
msgstr "Serielport"

#. `item(`id(`infra), _("Infrared Port (IrDA)")),
#. TRANSLATORS: Tree widget item
#: src/connectionwizard.ycp:235
msgid "Bluetooth"
msgstr "Bluetooth"

#. TRANSLATORS: Tree widget item
#: src/connectionwizard.ycp:237
msgid "SCSI"
msgstr "SCSI"

#. TRANSLATORS: Tree widget item
#: src/connectionwizard.ycp:239
msgid "HP Devices (HPLIP)"
msgstr "HP-enheder (HPLIP)"

#. TRANSLATORS: Tree widget item
#: src/connectionwizard.ycp:242
msgid "Access Network Printer or Printserver Box via"
msgstr "TilgÃ¥ netvÃ¦rksprinter eller udskriftsserverboks via"

#. TRANSLATORS: Tree widget item
#: src/connectionwizard.ycp:245
msgid "TCP Port (AppSocket/JetDirect)"
msgstr "TCP-port (AppSocket/JetDirect)"

#. TRANSLATORS: Tree widget item
#: src/connectionwizard.ycp:247
msgid "Line Printer Daemon (LPD) Protocol"
msgstr "LinjeprinterdÃ¦mon- (LPD-) protokol"

#. TRANSLATORS: Tree widget item
#: src/connectionwizard.ycp:249
msgid "Internet Printing Protocol (IPP)"
msgstr "Internetudskriftsprotokol (IPP)"

#
#. TRANSLATORS: Tree widget item
#: src/connectionwizard.ycp:252
msgid "Print Via Print Server Machine"
msgstr "Udskrift via udskriftservermaskine"

#. TRANSLATORS: Tree widget item
#: src/connectionwizard.ycp:255
msgid "Microsoft Windows/SAMBA (SMB/CIFS)"
msgstr "Microsoft Windows/SAMBA (SMB/CIFS)"

#. TRANSLATORS: Tree widget item
#: src/connectionwizard.ycp:257
msgid "Traditional UNIX Server (LPR)"
msgstr "Traditionel UNIX-server (LPR)"

#
#. `item(`id(`iprint), _("iPrint (Novell OES)")),
#. TRANSLATORS: Tree widget item
#: src/connectionwizard.ycp:260
msgid "CUPS Server"
msgstr "CUPS-server"

#. TRANSLATORS: Tree widget item
#: src/connectionwizard.ycp:262
msgid "Novell Netware Print Server (IPX)"
msgstr "Novell Netware Print Server (IPX)"

#
#. TRANSLATORS: Tree widget item
#: src/connectionwizard.ycp:265
msgid "Special"
msgstr "Speciel"

#. TRANSLATORS: Tree widget item
#: src/connectionwizard.ycp:268
msgid "Specify Arbitrary Device URI"
msgstr "Angiv tilfÃ¦ldig enheds-URI"

#. TRANSLATORS: Tree widget item
#: src/connectionwizard.ycp:270
msgid "Send Print Data to Other Program (pipe)"
msgstr "Send udskriftsdata til andet program (pipe)"

#. TRANSLATORS: Tree widget item
#: src/connectionwizard.ycp:272
msgid "Daisy-chain Backend Error Handler (beh)"
msgstr "FejlhÃ¥ndtering for Daisy-chain-backend (beh)"

#
#. TRANSLATORS: Connection details widget
#: src/connectionwizard.ycp:279
msgid "Connection Settings"
msgstr "Tilslutningsindstillinger"

#. TRANSLATORS: Connection wizard header
#: src/connectionwizard.ycp:286
msgid "Connection Wizard"
msgstr "Tilslutningsguide"

#
#: src/dialogs.ycp:86 src/dialogs.ycp:87
msgid "Printer Configurations"
msgstr "Printer-konfigurationer"

#
#: src/dialogs.ycp:94 src/dialogs.ycp:95
msgid "Print via Network"
msgstr "Udskrift via netvÃ¦rk"

#: src/dialogs.ycp:102 src/dialogs.ycp:103
msgid "Share Printers"
msgstr "Del printere"

#: src/dialogs.ycp:110 src/dialogs.ycp:111
msgid "Policies"
msgstr "Politikker"

#
#: src/dialogs.ycp:118 src/dialogs.ycp:119
msgid "Autoconfig Settings"
msgstr "OpsÃ¦tning af automatisk konfiguration"

#
#: src/dialogs.ycp:129
msgid "Detected Printers"
msgstr "Fundne printere"

#. Title of the Add Driver Dialog:
#: src/driveradd.ycp:48
msgid "Add Driver"
msgstr "TilfÃ¸j driver"

#. Header for a dialog section where the user can
#. add or remove printer driver packages:
#: src/driveradd.ycp:63
msgid "Install or Remove Printer Driver Packages"
msgstr "InstallÃ©r eller fjern printerdriver-pakker"

#. CheckBox to select or un-select the printer driver package cups-drivers.
#. There is no need to have the package name "cups-drivers" in this text
#. because it is shown in a separated column to the left of this text.
#: src/driveradd.ycp:75
msgid "Various Standard Drivers"
msgstr "Forskellige standarddrivere"

#. CheckBox to select or un-select the printer driver package gutenprint.
#. There is no need to have the package name "gutenprint" in this text
#. because it is shown in a separated column to the left of this text.
#. Do not change or translate "Gutenprint", it is a open source project name.
#. Do not change or translate "Gimp-Print", it is a open source project name.
#: src/driveradd.ycp:87
msgid "Gutenprint/Gimp-Print Driver"
msgstr "Gutenprint/Gimp-Print-driver"

#. CheckBox to select or un-select the printer driver packages hplip and
hplip-hpijs.
#. There is no need to have the package names "hplip" and "hplip-hpijs" in this
text
#. because they are shown in a separated column to the left of this text.
#: src/driveradd.ycp:97
msgid "Driver for HP Printers and All-in-One Devices"
msgstr "Drivere til HP-printere og All-in-One-enheder"

#. CheckBox to select or un-select the printer driver package manufacturer-PPDs.
#. There is no need to have the package name "manufacturer-PPDs" in this text
#. because it is shown in a separated column to the left of this text.
#: src/driveradd.ycp:107
msgid "Printer Description Files for PostScript Printers"
msgstr "Printerbeskrivelsesfiler til PostScript-printere"

#. CheckBox to select or un-select the printer driver package ghostscript-omni.
#. There is no need to have the package name "ghostscript-omni" in this text
#. because it is shown in a separated column to the left of this text.
#: src/driveradd.ycp:117
msgid "The Omni Printer Driver (Unmaintained)"
msgstr "Omni-printerdriver (ikke vedligeholdt)"

#. CheckBox to select or un-select the printer driver package filters
#. which provides some makeshift drivers only for a few of the
#. non-standard printers (the so called "GDI printers").
#. There is no need to have the package name "filters" in this text
#. because it is shown in a separated column to the left of this text.
#: src/driveradd.ycp:129
msgid "Makeshift Drivers for a Few Non-Standard (GDI) Printers"
msgstr "Makeshift-drivere til nogle fÃ¥ ikke-standard- (GDI) printere"

#. Header for a dialog section where the user can
#. make a printer description file (PPD file) available
#. so that it can be used to set up a print queue with it:
#: src/driveradd.ycp:142
msgid "Make a Printer Description File Available"
msgstr "GÃ¸r en printerbeskrivelsesfil tilgÃ¦ngelig"

#. TextEntry to specify the full path of a PPD file:
#: src/driveradd.ycp:152
msgid "&Printer description file name with full path where it is located"
msgstr "&Printerbeskrivelsesfilens navn med fuld sÃ¸gesti til hvor den er
placeret"

#. Label of a PushButton to open a file selection box
#. to browse the file system to select a PPD file:
#: src/driveradd.ycp:158
msgid "&Browse"
msgstr "&Gennemse"

#. Popup::ErrorDetails message
#. where %1 will be replaced by the file name:
#: src/driveradd.ycp:401
#, ycp-format
msgid "Cannot access '%1'"
msgstr "Kan ikke tilgÃ¥ '%1'"

#. Popup::ErrorDetails message:
#: src/driveradd.ycp:412
msgid "The printer description file is not in compliance to the specification."
msgstr "Printerbeskrivelsesfilen er ikke overensstemmelse med specifikationen."

#. Header of a Popup::ContinueCancelHeadline
#. when a PPD file is not in compliance:
#: src/driveradd.ycp:419
msgid "Use the printer description file regardless of its errors?"
msgstr "Vil du bruge printerbeskrivelsesfilen uanset dens fejl?"

#. Body of a Popup::ContinueCancelHeadline
#. when PPD file is not in compliance:
#: src/driveradd.ycp:422
msgid "A non-compliant printer description file can lead to arbitrary failures."
msgstr "En ikke-overensstemmende printerbeskrivelsesfil kan fÃ¸re til
tilfÃ¦ldige fejl."

#
#. Popup::ErrorDetails message:
#: src/driveradd.ycp:431
msgid "Failed make the printer description file available"
msgstr "Mislykkedes at gÃ¸re printerbeskrivelsesfilen tilgÃ¦ngelig"

#
#. Title of the Driver Options Dialog where %1 will be replaced by the queue
name.
#. The actual queue name is a system value which cannot be translated:
#: src/driveroptions.ycp:50
#, ycp-format
msgid "Driver Options for Queue %1"
msgstr "Driver-valgmuligheder for kÃ¸en %1"

#. Message of a Popup::Error
#. where %1 will be replaced by the queue name.
#. Only a simple message because this error does not happen on a normal system
#. (i.e. a system which is not totally broken or totally messed up).
#: src/driveroptions.ycp:115
#, ycp-format
msgid "Failed to set driver options for queue %1."
msgstr "OpsÃ¦tning af driver-valgmuligheder for kÃ¸en %1 fejlede."

#. Read dialog help 1/1:
#: src/helps.ycp:42
msgid ""
"\n"
"<big>Initializing printer Configuration</big> \n"
"Please wait... \n"
""
msgstr ""
"\n"
"<big>Initialiserer konfiguration af printer</big> \n"
"Vent venligst... \n"
""

#. Write dialog help 1/1:
#: src/helps.ycp:49
msgid ""
"\n"
"<big>Finishing printer Configuration</big> \n"
"Please wait... \n"
""
msgstr ""
"\n"
"<big>FÃ¦rdiggÃ¸r konfiguration af printer</big> \n"
"Vent venligst... \n"
""

#. Overview dialog help 1/7:
#: src/helps.ycp:56
msgid ""
"\n"
"<big>Print Queue Overview</big> \n"
"A printer device is not used directly but via a print queue. \n"
"When various application programs submit print jobs simultaneously,\n"
"these jobs are put in a queue and are sent one after the other to the
printer\n"
"device. \n"
"It is possible to have several different print queues for the same printer\n"
"device.\n"
"For example a second queue with a monochrome-only driver for a color device\n"
"or a PostScript queue and a queue with a PCL driver for a PostScript+PCL\n"
"printer or a queue to print on one side only of a sheet of paper and one for
two sided\n"
"printing.\n"
""
msgstr ""
"\n"
"<big>Oversigt over udskriftskÃ¸er</big> \n"
"En udskriftsenhed bruges ikke direkte, men via en udskriftskÃ¸. \n"
"NÃ¥r forskellige programmer tildeler udskriftsjobs samtidigt,\n"
"sÃ¦ttes disse i en kÃ¸ og sendes en ad gangen til udskriftsenheden. \n"
"Det er muligt, at have flere forskellige udskriftskÃ¸er til samme
udskriftsenhed.\n"
"For eksempel en anden kÃ¸ med kun-monokrom driver til en farveenhed eller en\n"
"PostScript-kÃ¸ og en kÃ¸ med en PCL-driver til en PostScript+PCL-printer,\n"
"eller en kÃ¸ til udskrivning pÃ¥ kun en side af papiret og en til tosidet
udskrift.\n"
""

#. Overview dialog help 2/7:
#: src/helps.ycp:70
msgid ""
"\n"
"<big>Using Remote Queues:</big> \n"
"Remote queues exist on other hosts in the network\n"
"and therefore they cannot be changed on this host. \n"
"The remote queues which are listed here are known on this host\n"
"and usually they can be used directly by application programs\n"
"so that there is no need to set up a local queue for a printer\n"
"which is already available via a remote queue. \n"
""
msgstr ""
"\n"
"<big>Anvendelse af eksterne kÃ¸er:</big> \n"
"Eksterne kÃ¸er findes pÃ¥ andre vÃ¦rter pÃ¥ netvÃ¦rket,\n"
"og derfor kan de ikke Ã¦ndres pÃ¥ denne vÃ¦rt. \n"
"De eksterne kÃ¸er, der vises her, kendes pÃ¥ denne vÃ¦rt,\n"
"og kan normalt bruges direkte af de anvendte programmer,\n"
"sÃ¥ det er ikke nÃ¸dvendigt at sÃ¦tte en lokal kÃ¸ op for en\n"
"printer, der allerede er tilgÃ¦ngelig via en ekstern kÃ¸. \n"
""

#. Overview dialog help 3/7:
#: src/helps.ycp:80
msgid ""
"\n"
"<big>Configure a printer:</big> \n"
"Press Add to set up a new queue for a printer device.\n"
""
msgstr ""
"\n"
"<big>KonfigurÃ©r en printer:</big> \n"
"Tryk pÃ¥ TilfÃ¸j for at sÃ¦tte en ny kÃ¸ op for en udskriftsenhed.\n"
""

#. Overview dialog help 4/7:
#: src/helps.ycp:85
msgid ""
"\n"
"<big>Change the settings for a queue:</big> \n"
"Select a local queue and press Configure.\n"
""
msgstr ""
"\n"
"<big>Ãndre indstillinger for en kÃ¸:</big> \n"
"VÃ¦lg en lokal kÃ¸ og tryk pÃ¥ KonfigurÃ©r.\n"
""

#. Overview dialog help 5/7:
#: src/helps.ycp:90
msgid ""
"\n"
"<big>Remove a queue:</big> \n"
"Select a local queue and press Delete.\n"
""
msgstr ""
"\n"
"<big>Fjerne en kÃ¸:</big> \n"
"VÃ¦lg en lokal kÃ¸ og tryk pÃ¥ Slet.\n"
""

#. Overview dialog help 6/7:
#: src/helps.ycp:95
msgid ""
"\n"
"<big>Print a test page:</big> \n"
"Select the queue and press Print Test Page.\n"
""
msgstr ""
"\n"
"<big>Udskrive en testside:</big> \n"
"VÃ¦lg kÃ¸en og tryk pÃ¥ Udskriv testside.\n"
""

#. Overview dialog help 7/7:
#: src/helps.ycp:100
msgid ""
"\n"
"<big>Refresh the list of queues:</big> \n"
"In particular after changes regarding printing via network\n"
"the available remote queues may have changed.\n"
"Usually it takes some time (up to several minutes)\n"
"until such changes become known to the local host\n"
"so that it is useful to press Refresh List\n"
"after some time to get an up-to-date list\n"
"of available remote queues.\n"
""
msgstr ""
"\n"
"<big>Genopfriske listen over kÃ¸er:</big> \n"
"SÃ¦rligt efter Ã¦ndringer vedr. udskrift over netvÃ¦rk\n"
"kan de tilgÃ¦ngelige eksterne kÃ¸er vÃ¦re Ã¦ndrede.\n"
"Normalt tager det noget tid (op til flere minutter),\n"
"fÃ¸r sÃ¥danne Ã¦ndringer kendes af den lokale vÃ¦rt.\n"
"Det er sÃ¥ledes nyttigt at trykke pÃ¥ Genopfrisk liste\n"
"efter et stykke tid for at fÃ¥ en ajourfÃ¸rt liste over\n"
"tilgÃ¦ngelige eksterne kÃ¸er.\n"
""

#. BasicAddDialog help 1/5:
#: src/helps.ycp:113
msgid ""
"\n"
"<big>Set Up a New Queue for a Printer Device</big> \n"
"A printer device is not used directly but via a print queue. \n"
"When various application programs submit print jobs simultaneously,\n"
"the jobs queue up and are sent one after the other to the printer
device. \n"
"It is possible to have several different print queues for the same printer
device.\n"
"Usually several print queues are needed when several different printer
drivers\n"
"should be used for the same printer device.\n"
"For example a second queue with a monochrome-only driver\n"
"to enforce black-only printout on a color device\n"
"or a PostScript queue and a queue with a PCL driver for a PostScript+PCL
printer\n"
"because printing via the PCL driver is usally faster (but with less
quality).\n"
""
msgstr ""
"\n"
"<big>SÃ¦t en ny kÃ¸ op til en printer-enhed</big> \n"
"En printer bruges ikke direkte, men via en udskriftskÃ¸. \n"
"NÃ¥r flere programmer tildeler udskriftsjobs samtidigt, sÃ¦ttes\n"
"disse i kÃ¸ og sendes en ad gangen til printeren. \n"
"Det er muligt, at have flere forskellige udskriftskÃ¸er til den samme
printer.\n"
"Flere udskriftskÃ¸er er normalt nÃ¸dvendige, nÃ¥r der skal benyttes flere\n"
"printer-drivere til den samme printer-enhed.\n"
"Det kan f.eks. vÃ¦re en udelukkende monokrom driver for at gennemtvinge\n"
"sort/hvide udskrifter pÃ¥ en farveprinter, eller en PostScript-kÃ¸ og en\n"
"PCL-driver til en PostScript+PCL-printer, da udskrift via PCL-\n"
"driveren normalt er hurtigere (men med dÃ¥rligere kvalitet).\n"
""

#. BasicAddDialog help 2/5:
#: src/helps.ycp:127
msgid ""
"\n"
"To set up a new queue: \n"
"Select the connection of the matching printer device, \n"
"find and assign a suitable printer driver, and \n"
"set a unique queue name.\n"
""
msgstr ""
"\n"
"At sÃ¦tte en ny kÃ¸ op: \n"
"VÃ¦lg den tilslutning som matcher printer-enheden, \n"
"find og tildel en passende printer-driver, og \n"
"angiv et unikt navn pÃ¥ kÃ¸en.\n"
""

#. BasicAddDialog help 3/5:
#. BasicModifyDialog help 2/4:
#: src/helps.ycp:134 src/helps.ycp:169
msgid ""
"\n"
"The connection determines which way data is sent to the printer
device. \n"
"If a wrong connection is selected, no data can be sent to the device\n"
"so that there cannot be any printout. \n"
"If a printer device is accessible via more than one connection type,\n"
"it is shown for each connection type. \n"
"In particular HP devices are often accessible both via the 'usb:/...'\n"
"and the 'hp:/...' connection.\n"
"The latter is provided by the HP driver package 'hplip'.\n"
"For plain printing both kind of connections should work but for anything
else\n"
"(e.g. device status via 'hp-toolbox', or scanning with a HP all-in-one
device)\n"
"the 'hp:/...' connection must be used.\n"
""
msgstr ""
"\n"
"Tilslutningen bestemmer, hvilken vej data sendes til
printer-enheden. \n"
"Hvis en forkert tilslutning vÃ¦lges, kan ingen data sendes til enheden,\n"
"og der kan sÃ¥ledes ikke udskrives. \n"
"Hvis en printer-enhed kan tilgÃ¥s via mere end Ã©n tilslutningstype,\n"
"vises den for hver tilslutningstype. \n"
"SÃ¦rligt HP-enheder kan ofte tilgÃ¥s via bÃ¥de 'usb:/...'- og 'hp:/...'-\n"
"tilslutningen.\n"
"Den sidstnÃ¦vnte tilbydes af HP driver-pakken 'hplip'.\n"
"Begge slags tilslutninger skulle virke til almindelig udskrift, men til alt\n"
"muligt andet (f.eks. enhedsstatus via 'hp-toolbox', eller scanning med en HP\n"
"all-in-one-enhed skal 'hp:/...'-tilslutningen benyttes.\n"
""

#. BasicAddDialog help 4/5:
#: src/helps.ycp:148
msgid ""
"\n"
"The driver determines that the right data is produced for the\n"
"specific printer model. \n"
"If a wrong driver is assigned, wrong data is sent to the printer\n"
"which results bad looking printout, chaotic printout, or no printout at all.\n"
""
msgstr ""
"\n"
"Driveren bestemmer, at den rigtige data produceres til den\n"
"angivne printer-model. \n"
"Hvis en forkert driver tildeles, sendes forkert data til printeren, hvilket\n"
"resulterer i dÃ¥rligt udseende, kaotisk eller slet intet udskrift.\n"
""

#. BasicAddDialog help 5/5:
#: src/helps.ycp:155
msgid ""
"\n"
"Application programs do not show the actual printer device\n"
"but its associated queue name. \n"
"Only letters [A-Za-z], numbers [0-9], and the underscore '_'\n"
"are allowed for the queue name and it must start with a letter.\n"
""
msgstr ""
"\n"
"Applikationsprogrammer viser ikke den faktiske printer-enhed\n"
"men dens associerede navn pÃ¥ kÃ¸en. \n"
"Kun bogstaver [A-Z a-z], tal [0-9] og bundstreg '_'\n"
"er tilladt i navne pÃ¥ kÃ¸er, og det skal starte med et bogstav.\n"
""

#. BasicModifyDialog help 1/4:
#: src/helps.ycp:164
msgid ""
"\n"
"<big>Modify a Print Queue</big> \n"
"To modify a queue, select only what you really want to be changed. \n"
""
msgstr ""
"\n"
"<big>Ãndre en udskriftskÃ¸</big> \n"
"VÃ¦lg kun det, du virkelig vil have Ã¦ndret, for at Ã¦ndre en kÃ¸. \n"
""

#. BasicModifyDialog help 3/4:
#: src/helps.ycp:183
msgid ""
"\n"
"The driver determines that the right data is produced for the\n"
"specific printer model. \n"
"If a wrong driver is assigned, wrong data is sent to the printer\n"
"which results bad looking printout, chaotic printout, or no printout at
all. \n"
"You can either select another driver and modify its driver option settings
later\n"
"or keep the currently used driver and modify its driver option settings
now. \n"
"Some driver option settings must match to your particular printer.\n"
"For example the default paper size setting of the driver\n"
"must match to the paper which is actually loaded in your printer. \n"
"For other driver option settings you can choose what you like.\n"
"For example any choice of the available printing resolutions\n"
"should work for the particular driver.\n"
"Nevertheless it may happen that your particular printer fails to print\n"
"with high resolution. For example when you have a laser printer\n"
"which has insufficient built-in memory to process high resolution pages.\n"
""
msgstr ""
"\n"
"Driveren sÃ¸rger for, at de rette data produceres til den\n"
"angivne printer-model. \n"
"Hvis en forkert driver tildeles, sendes forkerte data til printeren, hvilket\n"
"resulterer i dÃ¥rligt udseende, kaotisk eller slet intet udskrift. \n"
"Du kan enten vÃ¦lge en anden driver, og senere Ã¦ndre opsÃ¦tningen af\n"
"driver-valgmulighederne, eller beholde den nuvÃ¦rende driver og Ã¦ndre\n"
"dens opsÃ¦tning af driver-valgmulighederne nu. \n"
"Nogle indstillinger i driver-valgmulighederne skal passe til den enkelte
printer.\n"
"OpsÃ¦tning af driverens standard-papirstÃ¸rrelse skal f.eks. matche det
papir,\n"
"der faktisk er lagt i printeren. \n"
"Til andre indstillinger af driver-valgmuligheder kan du vÃ¦lge, hvad du har\n"
"lyst til. For eksempel skulle ethvert valg af udskriftsoplÃ¸ninger fungere\n"
"for den enkelte .\n"
"Dog kan det hÃ¦nde, at din egen printer fejler i udskrift med hÃ¸j
oplÃ¸sning,\n"
"hvis du f.eks. har en laser-printer, der ikke har den fornÃ¸dne indbyggede\n"
"hukommelse til at bearbejde sider med hÃ¸j oplÃ¸sning.\n"
""

#. BasicModifyDialog help 4/4:
#: src/helps.ycp:201
msgid ""
"\n"
"In contrast to connection and driver where you must select the right one,\n"
"you are free to enter arbitrary strings for description and
location.\n"
"Application programs often show description and location in the print
dialog.\n"
"To make sure that those strings look correct in any language\n"
"which a particular user of a particular application program may use,\n"
"it is safe when you use only plain text without special characters\n"
"(e.g. only letters [A-Za-z], numbers [0-9], and spaces).\n"
"Usually the description describes the model and optionally the driver\n"
"(e.g. 'ACME FunPrinter 1000 using generic PCL driver')\n"
"and the location describes where the printer is located\n"
"(e.g. 'Room 123' or 'Front Desk').\n"
""
msgstr ""
"\n"
"Modsat tilslutning og driver, hvor du skal vÃ¦lge den rigtige, kan du frit\n"
"angive vilkÃ¥rlige strenge for beskrivelse og placering.\n"
"Applikationsprogrammerne viser ofte beskrivelse og placering i\n"
"udskriftdialogen.\n"
"Det er bedst kun at benytte ren tekst og uden specielle tegn (f.eks kun\n"
"bogstaver [A-Z a-z] og tal [0-9] og mellemrum) for at sikre, at disse\n"
"strenge ser rigtige ud pÃ¥ ethvert sprog, som en applikationsbruger\n"
"mÃ¥te anvende.\n"
"Normalt beskriver beskrivelsen modellen og evt. driveren (som f.eks.\n"
"'ACME FunPrinter 1000 med generic PCL-driver'), ligesom placering\n"
"beskriver, hvor printeren er placeret (f.eks. 'Rum 123' eller 'Reception').\n"
""

#. DriverOptionsDialog help 1/3:
#: src/helps.ycp:217
msgid ""
"\n"
"<big>Set Driver Options</big> \n"
"Usually it is best to leave the driver defaults because\n"
"the defaults should be reasonable for usual printing. \n"
"Additionally the print dialogs in usual application programs\n"
"show the driver options too so that each user can specify\n"
"driver options for each individual printout. \n"
"The only setting which should be checked in any case is the paper size\n"
"which must be set to what is actually used by default in the printer.\n"
""
msgstr ""
"\n"
"<big>Indstil valgmuligheder for driver</big> \n"
"Normalt er det bedst blot at benytte standardindstillingerne for\n"
"driveren, da disse burde vÃ¦re udmÃ¦rkede til alm. udskrift. \n"
"Ydermere viser udskriftdialogen i almindelige applikations-\n"
"programmer valgmulighederne for driveren, sÃ¥ hver bruger kan\n"
" angive disse for hvert enkelt udskrift. \n"
"Den eneste indstilling, der skal tjekkes i hvert enkelt tilfÃ¦lde, er\n"
"papirstÃ¸rrelsen, der skal sÃ¦ttes til den, der faktisk benyttes som\n"
"standard i printeren.\n"
""

#. DriverOptionsDialog help 2/3:
#: src/helps.ycp:228
msgid ""
"\n"
"Non-default settings may not work in any case or have unexpected
consequences. \n"
"For example a high resolution setting may not work for a laser printer\n"
"when its default built-in memory is insufficient to process high resolution
pages. \n"
"Or a high quality setting may print intolerable slow on an inkjet printer.\n"
""
msgstr ""
"\n"
"Ikke-standardindstillinger virker mÃ¥ske slet ikke eller har uventede
konsekvenser. \n"
"For eksempel virker en for hÃ¸jt sat oplÃ¸sning mÃ¥ske ikke for en
laser-printer, hvis den\n"
"standard indbyggede hukommelse er utilstrÃ¦kkelig til at behandle sider med
hÃ¸j oplÃ¸sning. \n"
"Eller en hÃ¸jkvalitets indstilling gÃ¸r udskrift utÃ¥leligt langsom pÃ¥ en
inkjet-printer\n"
""

#. DriverOptionsDialog help 3/3:
#: src/helps.ycp:235
msgid ""
"\n"
"On the other hand in certain cases printer-specific driver settings\n"
"must be adjusted to get the full functionality of a printer. \n"
"In particular when the printer has optional units installed like\n"
"duplex unit or optional paper feeders, the matching driver settings\n"
"should be checked and adjusted. \n"
"For example a duplex unit option must be set to 'installed' or 'true'\n"
"otherwise the driver may ignore duplex printing option settings.\n"
""
msgstr ""
"\n"
"PÃ¥ den anden side set skal specifikke driver-indstillinger justeres\n"
"for at opnÃ¥ den fulde funktionalitet af en printer. \n"
"Specielt, hvis printeren har valgfrie elementer installeret som\n"
"'duplex unit' eller valgfrie papirfÃ¸dere, skal de passende driver-\n"
"indstillinger markeres og justeres. \n"
"For eksempel skal duplex-elementet sÃ¦ttes til 'installed' eller 'true',\n"
"ellers kan printeren evt. ignorere opsÃ¦tningen af duplex-udskrift.\n"
""

#. AddDriverDialog help 1/2:
#: src/helps.ycp:247
msgid ""
"\n"
"<big>Add or Remove Printer Driver Packages</big> \n"
"When a printer driver package is not marked, it is not installed\n"
"and then you can select it so that it will be installed. \n"
"When a printer driver package is marked, it is installed\n"
"and then you can un-select it so that it will be removed.\n"
"In the latter case it is up to you to make sure\n"
"that there is no printer configuration which needs the driver. \n"
""
msgstr ""
"\n"
"<big>TilfÃ¸j eller fjern printerdriver-pakker</big> \n"
"NÃ¥r en printerdriver-pakke ikke er markeret, er den ikke\n"
"installeret, og du kan sÃ¥ vÃ¦lge den til installation. \n"
"NÃ¥r en printerdriver-pakke er markeret, er den installeret,\n"
"og du kan sÃ¥ fravÃ¦lge den, sÃ¥ den bliver fjernet.\n"
"I det sidste tilfÃ¦lde er det op til dig at tilsikre, at der ikke\n"
"er en printerkonfiguration, som behÃ¸ver driveren. \n"
""

#. AddDriverDialog help 2/2:
#: src/helps.ycp:257
msgid ""
"\n"
"<big>Add a Printer Description File</big> \n"
"To set up a printer configuration a printer description file\n"
"(PPD file) is required. \n"
"When a PPD file is not located in the /usr/share/cups/model/ directory,\n"
"it is not available to set up a printer configuration with it.\n"
"Therefore you can specify the full path of a PPD file\n"
"which is located elsewhere on your system to get it installed\n"
"in the /usr/share/cups/model/ directory. \n"
"Note that a printer description file is not a driver. \n"
"For non-PostScript printers the PPD file alone is\n"
"not sufficient to set up a working printer configuration.\n"
"In particular it does not work for non-PostScript printers\n"
"to download a PPD file from the Internet and then set up\n"
"the printer with such a PPD file.\n"
"The plain printer setup would work but actual printing\n"
"would not work because the driver is missing.\n"
"For non-PostScript printers you need a printer driver\n"
"and a PPD file which matches exactly to the particular driver.\n"
"Matching PPD files are automatically installed at the right place\n"
"when you install the above mentioned printer driver packages. \n"
"Only for PostScript printers, a PPD file alone is usually\n"
"sufficient to set up a working PostScript printer configuration.\n"
"In particular it is sufficient when the PPD file does not\n"
"contain a 'cupsFilter' entry because such an entry would\n"
"reference a printer driver. \n"
""
msgstr ""
"\n"
"<big>TilfÃ¸j en printerbeskrivelsesfil</big> \n"
"En printerbeskrivelsesfil (PPD-fil) krÃ¦ves for at sÃ¦tte en\n"
"printerkonfiguration op. \n"
"NÃ¥r en PPD-fil ikke findes i mappen /usr/share/cups/model/, er\n"
"den ikke tilgÃ¦ngelig til opsÃ¦tning af en printerkonfiguration.\n"
"Du kan derfor angive den fulde sÃ¸gesti til en PPD-fil, der findes\n"
"andetsteds pÃ¥ dit system, for at fÃ¥ den installeret i mappen\n"
"/usr/share/cups/model/. \n"
"BemÃ¦rk at en printerbeskrivelsesfil ikke er en driver. \n"
"Til ikke-PostScript-printere er PPD-filen alene ikke nok til\n"
"opsÃ¦tning af en fungerende printerkonfiguration.\n"
"Specielt virker det ikke for ikke-PostScript-printere at\n"
"downloade en PPD-fil fra internettet, for derefter at sÃ¦tte\n"
"printeren op med en sÃ¥dan PPD-fil.\n"
"Den enkle opsÃ¦tning af printeren vil fungere, men den faktiske\n"
"udskrivning virker ikke, da driveren mangler.\n"
"Til ikke-PostScript-printere skal du bruge en printerdriver og\n"
"en PPD-fil, der matcher fuldstÃ¦ndigt til den enkelte driver.\n"
"Matchende PPD-filer installeres automatisk pÃ¥ den rette plads,\n"
"nÃ¥r du installerer printerdriver-pakkerne nÃ¦vnt ovenfor. \n"
"Kun til PostScript-printere er en PPD-fil alene normalt nok til\n"
"at sÃ¦tte en fungerende PostScript-printerkonfiguration op.\n"
"Specielt er det nok, hvis PPD-filen ikke indeholder en\n"
"'cupsFilter'-indgang, da en sÃ¥dan ville henvise til en\n"
"printerdriver. \n"
""

#. ConnectionWizardDialog help 1/6:
#: src/helps.ycp:287
msgid ""
"\n"
"<big>Specify the Connection</big> \n"
"The connection determines which way data is sent to the printer
device. \n"
"If a wrong connection is used, no data can be sent to the device\n"
"so that there cannot be any printout.\n"
""
msgstr ""
"\n"
"<big>Angiv tilslutningen</big> \n"
"Tilslutningen bestemmer, hvilken vej data sendes til
printer-enheden. \n"
"Hvis en forkert tilslutning anvendes, kan ingen data sendes til enheden,\n"
"sÃ¥ledes bliver der heller ikke nogen udskrift.\n"
""

#. ConnectionWizardDialog help 2/6:
#: src/helps.ycp:294
#, ycp-format
msgid ""
"\n"
"<big>Printer Device URI</big> \n"
"A connection is specified as so called device URI. \n"
"Its first word (the so called URI scheme) specifies the kind of
data-transfer,\n"
"for example 'parallel', 'usb', 'socket', 'lpd', or 'ipp'. \n"
"After the scheme there are more or less additional parts\n"
"(separated by slash '/' characters) which specify the details\n"
"for this kind of data-transfer. \n"
"Finally there could be optional parameters (separated by a question mark
'?')\n"
"of the form option1=value1&option2=value2&option3=value3 so that\n"
"a full device URI could be for example: \n"
"ipp://server.domain:631/printers/queuename?waitjob=false&waitprinter=false \n"
"Special characters must be percent-encoded (also known as URL encoding).\n"
"For example a space character ' ' must be written as '%20'\n"
"and a plus sign '+' must be written as '%2B'. \n"
"Some examples: \n"
"A USB printer model 'Fun Printer 1000+' made by 'ACME'\n"
"with serial number 'A1B2C3' may have a device URI like: \n"
"usb://ACME/Fun%20Printer%201000%2B?serial=A1B2C3 \n"
"A network printer with IP 192.168.100.1 which is accessible\n"
"via port 9100 may have a device URI like: \n"
"socket://192.168.101.202:9100 \n"
"A network printer with IP 192.168.100.2 which is accessible\n"
"via LPD protocol with a remote LPD queue name 'lpt1'\n"
"may have a device URI like: \n"
"lpd://192.168.100.2/lpt1\n"
""
msgstr ""
"\n"
"<big>Printer-enhedens URI</big> \n"
"En tilslutning angives som et sÃ¥kaldt enheds-URI. \n"
"Dets fÃ¸rste ord (det sÃ¥kaldte URI-skema) angiver typen af dataoverfÃ¸rsel,\n"
"for eksempel 'parallel', 'usb', 'socket', 'lpd' eller 'ipp'. \n"
"Efter skemaet er der flere eller fÃ¦rre yderligere dele (adskilt med\n"
"skrÃ¥streger '/'), som angiver detaljerne for denne type
dataoverfÃ¸rsel. \n"
"Til sidst kan der vÃ¦re valgfrie parametre (adskilt med et spÃ¸rgsmÃ¥lstegn
'?')\n"
"i form af valgmulighed1=vÃ¦rdi1&valgmulighed2=vÃ¦rdi2&valgmulighed3=\n"
"vÃ¦rdi3 sÃ¥ledes at en fuld enheds-URI f.eks. kan vÃ¦re: \n"
"ipp://server.domÃ¦ne:631/printere/kÃ¸navn?waitjob=false&waitprinter=false \n"
"Specielle tegn skal vÃ¦re procent-kodet (ogsÃ¥ kendt som URL-kodning).\n"
"Et mellemrum ' 'skal f.eks. skrives som '%20',\n"
"og et plus-tegn '+' skal skrives som '%2B'. \n"
"Nogle eksempler: \n"
"En USB-printer model 'Fun Printer 1000+' produceret af 'ACME'\n"
"med serienummer 'A1B2C3' kan have denne enheds-URI: \n"
"usb://ACME/Fun%20Printer%201000%2B?serial=A1B2C3 \n"
"En netvÃ¦rksprinter med IP 192.168.100.1, der er tilgÃ¦ngelig\n"
"via port 9100, kan have denne enheds-URI: \n"
"socket://192.168.101.202:9100 \n"
"En netvÃ¦rksprinter med IP 192.168.100.2 der er tilgÃ¦ngelig\n"
"via LPD-protokol med det eksterne LPD-kÃ¸navn 'lpt1'\n"
"kan have denne enheds-URI: \n"
"lpd://192.168.100.2/lpt1\n"
""

#. ConnectionWizardDialog help 3/6:
#: src/helps.ycp:322
msgid ""
"\n"
"<big>Device URIs for Directly Connected Devices</big> \n"
"Devices which are connected via the parallel port or via USB\n"
"are autodetected and the appropriate device URI is autogenerated.\n"
"For example: \n"
"parallel:/dev/lp0 \n"
"usb://ACME/FunPrinter \n"
"hp:/usb/HP_LaserJet?serial=1234 \n"
"Usually only the autogenerated device URIs work.\n"
"When the device is not autodetected, there is usually no communication\n"
"with the device possible and no data can be sent to the device.\n"
""
msgstr ""
"\n"
"<big>Enheds-URI'er for direkte tilsluttede enheder</big> \n"
"Enheder, som er tilsluttet via parallelport eller via USB, findes\n"
"automatisk, og den passende enheds-URI genereres automatisk.\n"
"For eksempel: \n"
"parallel:/dev/lp0 \n"
"usb://ACME/FunPrinter \n"
"hp:/usb/HP_LaserJet?serial=1234 \n"
"Normalt er det kun den automatisk genererede enheds-URI, der virker.\n"
"Hvis enheden ikke findes automatisk, er der normalt ingen mulig\n"
"kommunikation med enheden, og ingen data kan sendes til enheden.\n"
""

#. ConnectionWizardDialog help 4/6:
#: src/helps.ycp:335
msgid ""
"\n"
"<big>Device URIs to Access a Network Printer or a Printserver
Box</big> \n"
"A printserver box is a small device with a network connection\n"
"and a USB or parallel port connection to connect the actual printer.\n"
"A network printer has such kind of device built-in.\n"
"Access happens via three different network protocols.\n"
"See the manual of your network printer or printserver box\n"
"what your particular device supports: \n"
"TCP Port (AppSocket/JetDirect) \n"
"The IP address and a port number is needed to access it.\n"
"Often the port number 9100 is the right one.\n"
"It is the simplest, fastest, and generally the most reliable protocol.\n"
"The matching device URI is: \n"
"socket://ip-address:port-number \n"
"Line Printer Daemon (LPD) Protocol \n"
"A LPD runs on the device and provides one or more LPD queues.\n"
"The IP address and a LPD queue name is needed to access it.\n"
"Almost all network printers and printserver boxes support it.\n"
"Often an arbitrary queue name or 'LPT1' works somehow.\n"
"But using a correct LPD queue which does not somehow change\n"
"the data or add additional formfeeds or banner pages\n"
"could be essential for reliable printing.\n"
"The matching device URI is: \n"
"lpd://ip-address/queue \n"
"Internet Printing Protocol (IPP) \n"
"IPP is the native protocol for CUPS which runs on a real computer\n"
"but when IPP is implemented in a small printserver box,\n"
"it is often not implemented properly. Only use IPP when the vendor\n"
"actually documents official support for it. \n"
"The matching device URI is: \n"
"ipp://ip-address:port-number/resource \n"
"What 'port-number' and 'resource' exactly is depends totally\n"
"on the particular network printer or printserver box model. \n"
"For more information have a look at \n"
"http://www.cups.org/documentation.php/network.html\n";
""
msgstr ""
"\n"
"<big>Enheds-URI'er for adgang til en netvÃ¦rksprinter eller en
printserverboks</big> \n"
"En printserverboks er en lille enhed med en netvÃ¦rkstilslutning samt\n"
"en USB- eller parallelport for tilslutning til den egentlige printer.\n"
"En netvÃ¦rksprinter har sÃ¥dan en type enhed indbygget.\n"
"Adgang sker via tre forskellige netvÃ¦rksprotokoller.\n"
"Se i din netvÃ¦rksprinters eller printserverboks' manual,\n"
"hvad din egen enhed understÃ¸tter: \n"
"TCP-port (AppSocket/JetDirect) \n"
"IP-adressen og portnummer skal bruges for at tilgÃ¥ den.\n"
"Ofte er port nummer 9100 den rette.\n"
"Det er den enkleste, hurtigste og generelt mest trovÃ¦rdige protokol.\n"
"Den matchende enheds-URI er: \n"
"socket://ip-adresse:portnummer \n"
"LPD-protokol (Line Printer Daemon) \n"
"En LPD kÃ¸rer pÃ¥ enheden og tilbyder en eller flere LPD-kÃ¸er.\n"
"IP-adresse og et LPD-kÃ¸navn skal bruges for at tilgÃ¥ den.\n"
"NÃ¦sten alle netvÃ¦rksprintere og printserverbokse understÃ¸tter den.\n"
"Ofte kan et vilkÃ¥rligt kÃ¸navn eller 'LPT1' fungere.\n"
"Men at benytte en korrekt LPD-kÃ¸, der ikke pÃ¥ nogen mÃ¥de Ã¦ndrer\n"
"data, tilfÃ¸jer yderligere sideskift eller skilleark, kan vÃ¦re essentiel\n"
"for en pÃ¥lidelig udskrift.\n"
"Den passende enheds-URI er: \n"
"lpd://ip-adresse/kÃ¸ \n"
"IPP (Internet Printing Protocol) \n"
"IPP er den oprindelige protokol for CUPS, som kÃ¸rer pÃ¥ en reel computer.\n"
"Men hvor IPP er implementeret i en lille printserverboks, er det ofte\n"
"ikke implementeret ordentligt. Brug kun IPP, nÃ¥r producenten\n"
"reelt dokumenterer understÃ¸ttelse af den. \n"
"Den passende enheds-URI er: \n"
"ipp://ip-adresse:portnummer/ressource \n"
"Hvad 'portnummer' og 'ressource' nÃ¸jagtigt er afhÃ¦nger af\n"
"den enkelte netvÃ¦rksprinter- eller printserverboks-model. \n"
"For mere information kig pÃ¥ \n"
"http://www.cups.org/documentation.php/network.html\n";
""

#. ConnectionWizardDialog help 5/6:
#: src/helps.ycp:372
msgid ""
"\n"
"<big>Device URIs to Print Via a Print Server Machine</big> \n"
"In contrast to a printserver box a print server machine\n"
"means a real computer which offers a print service. \n"
"Access happens via various different network protocols.\n"
"Ask your network administrator what which print server machine\n"
"provides in your particular network: \n"
"Microsoft Windows/SAMBA (SMB/CIFS) \n"
"A server name and a printer share name and optionally a workgroup name\n"
"is needed to access it.\n"
"Furthermore a user name and a password may be required to get access.\n"
"A matching full device URI is: \n"
"smb://username:password@workgroup/server/printer \n"
"For more information have a look at <tt>man smbspool</tt> and \n"
"http://en.opensuse.org/SDB:Printing_via_SMB_(Samba)_Share_or_Windows_Share \n"
"Traditional UNIX Server (LPR) \n"
"A Line Printer Daemon (LPD) runs on a traditional UNIX server\n"
"and provides one or more LPD queues.\n"
"The IP address and a LPD queue name is needed to access it.\n"
"The matching device URI is: \n"
"lpd://ip-address/queue \n"
"CUPS Server \n"
"Usually you should not set up a local print queue to access\n"
"a remote queue on a CUPS server. Instead do the setup\n"
"in the Print Via Network dialog.\n"
"Only if you really know that you must set up a local print queue\n"
"to access a remote queue on a CUPS server proceed here. \n"
"IPP is the native protocol for CUPS which runs on a server.\n"
"The official IANA port for IPP is 631.\n"
"The matching device URI is: \n"
"ipp://ip-address:631/printers/queue \n"
"Novell Netware Print Server (IPX) \n"
"To access print queues on a Novell Netware print server,\n"
"the RPM package ncpfs must be installed.\n"
"The package provides the CUPS backend 'novell' which runs\n"
"CUPS 1.1.18\n"
"the <tt>nprint</tt> program which actually sends the data\n"
"to a Novell Netware print queue.\n"
"A server name and a printer queue name is needed to access it.\n"
"Furthermore a user name and a password may be required to get access.\n"
"The matching device URI is: \n"
"novell://username:password@server/queue \n"
"For more information have a look at <tt>man nprint</tt> and\n"
"the other documentation in the RPM package ncpfs.\n"
""
msgstr ""
"\n"
"<big>Enheds-URI'er til udskrift via en
udskriftservermaskine</big> \n"
"I modsÃ¦tning til en printserverboks er en printservermaskine\n"
"en reel computer, der tilbyder en udskrifttjeneste. \n"
"Adgang foregÃ¥r via flere forskellige netvÃ¦rksprotokoller.\n"
"SpÃ¸rg din netvÃ¦rksadministrator, hvad hvilken printservermaskine\n"
"tilbyder pÃ¥ dit netvÃ¦rk: \n"
"Microsoft Windows/SAMBA (SMB/CIFS) \n"
"For at tilgÃ¥ dette krÃ¦ves et servernavn, en printerdelingsnavn og\n"
"valgfrit et navn pÃ¥ en arbejdsgruppe.\n"
"Ydermere kan der krÃ¦ves et brugernavn og en adgangskode for tilgang.\n"
"En passende komplet enheds-URI er: \n"
"smb://brugernavn:adgangskode@arbejdsgruppe/server/printer \n"
"For mere information kig pÃ¥ <tt>man smbspool</tt> og \n"
"http://en.opensuse.org/SDB:Printing_via_SMB_(Samba)_Share_or_Windows_Share \n"
"Traditionel UNIX-server (LPR) \n"
"En linjeprinterdÃ¦mon (LPD) kÃ¸rer pÃ¥ en traditionel UNIX-server\n"
"og tilbyder en eller flere LPD-kÃ¸er.\n"
"Der krÃ¦ves en IP adresse og et LPD-kÃ¸navn for at tilgÃ¥ det.\n"
"Den passende enheds-URI er: \n"
"lpd://ip-adresse/kÃ¸ \n"
"CUPS-server \n"
"Normalt skal du ikke sÃ¦tte en lokal udskriftskÃ¸ op for at tilgÃ¥\n"
"en ekstern kÃ¸ pÃ¥ en CUPS-server. Lav i stedet opsÃ¦tningen\n"
"i dialogen Udskrift via netvÃ¦rk.\n"
"FortsÃ¦t kun her, hvis du er sikker pÃ¥, at du skal sÃ¦tte en lokal\n"
"udskriftskÃ¸ op for at tilgÃ¥ en ekstern kÃ¸ pÃ¥ en CUPS-server. \n"
"IPP er den oprindelige protokol for CUPS, der kÃ¸rer pÃ¥ en server.\n"
"Den officielle IANA-port til IPP er 631.\n"
"Den passende enheds-URI er: \n"
"ipp://ip-adresse:631/printere/kÃ¸ \n"
"IPX (Novell Netware Print Server) \n"
"RPM-pakken ncpfs skal installeres for at tilgÃ¥ udskriftskÃ¸er pÃ¥\n"
"en Novell Netware printserver.\n"
"Pakken leverer en CUPS-backend - 'novell' - der kÃ¸rer\n"
"CUPS 1.1.18-programmet\n"
"<tt>nprint</tt>, der faktisk sender dataene til en Novell\n"
"Netware udskriftskÃ¸.\n"
"Der krÃ¦ves servernavn og navn pÃ¥ udskriftskÃ¸ for at fÃ¥ adgang.\n"
"Ydermere kan der krÃ¦ves et brugernavn og en adgangskode for tilgang.\n"
"Den passende enheds-URI er: \n"
"novell://brugernavn:adgangskode@server/kÃ¸ \n"
"For mere information kig pÃ¥ <tt>man nprint</tt> og\n"
"den anden dokumentation i RPM-pakken ncpfs.\n"
""

#. ConnectionWizardDialog help 6/6:
#: src/helps.ycp:418
msgid ""
"\n"
"<big>Special Device URIs</big> \n"
"Specify an Arbitrary Device URI\n"
"if you know the exact right device URI for your particular case\n"
"or to modify an existing device URI in a special way. \n"
"Send Print Data to Other Program (pipe) \n"
"To do this, the RPM package cups-backends must be installed.\n"
"The package provides the CUPS backend 'pipe' which runs\n"
"the program that you specified here.\n"
"The matching device URI is: \n"
"pipe:/path/to/targetcommand \n"
"Daisy-chain Backend Error Handler (beh) \n"
"To do this, the RPM package cups-backends must be installed.\n"
"The package provides the CUPS backend 'beh'. \n"
"The backend 'beh' is a wrapper for the usual backend,\n"
"which is then called by beh.\n"
"This way beh can, depending on its configuration,\n"
"repeat the call of the backend or simply hide the error status\n"
"of the backend from being seen by the CUPS daemon.\n"
"The matching device URI is: \n"
"beh:/nodisable/attempts/delay/originalDeviceURI \n"
"If nodisable is '1' beh always exits successfully\n"
"so that the queue gets never disabled but on the other hand\n"
"print jobs are lost if there is an error. \n"
"Attempts is the number of attempts to recall the backend\n"
"in case of an error. '0' means infinite retries. \n"
"Delay is the number of seconds between two attempts\n"
"to call the backend. \n"
"The last parameter is the original URI, which the queue had before. \n"
"Example: \n"
"beh:/1/3/5/socket://ip-address:port-number \n"
"The beh backend tries to access a network printer 3 times with 5 second
delay\n"
"between the attempts. If access still fails, the queue is not disabled\n"
"and the print job is lost. \n"
"For more information have a look at
<tt>/usr/lib[64]/cups/backend/beh</tt> and \n"
"http://www.linuxfoundation.org/en/OpenPrinting/Database/BackendErrorHandler \n"
""
msgstr ""
"\n"
"<big>Specielle enheds-URI'er</big> \n"
"Angiv en vilkÃ¥rlig enheds-URI,\n"
"hvis du kender det helt rigtige enheds-URI for dit tilfÃ¦lde, eller\n"
"du vil Ã¦ndre et eksisterende enheds-URI pÃ¥ en bestemt mÃ¥de. \n"
"Send udskriftdata til andet program (pipe) \n"
"For at gÃ¸re dette skal RPM-pakken cups-backends installeres.\n"
"Pakken leverer en CUPS-backend - 'pipe' - der kÃ¸rer det\n"
"program, du har angivet her.\n"
"Den passende enheds-URI er: \n"
"pipe:/sti/til/mÃ¥lkommando \n"
"FejlhÃ¥ndtering for Daisy-chain-backend (beh) \n"
"For at gÃ¸re dette skal RPM-pakken cups-backends installeres.\n"
"Pakken leverer en CUPS-backend 'beh'. \n"
"Denne backend - 'beh' - er et omslag for den alm. backend,\n"
"der sÃ¥ kaldes af beh.\n"
"PÃ¥ denne mÃ¥de kan beh, afhÃ¦ngigt af dens konfiguration,\n"
"gentage kaldet af backend, eller ganske enkelt forhindre, at\n"
"backendens fejlstatus kan ses af CUPS-dÃ¦monen.\n"
"Den passende enheds-URI er: \n"
"beh:/deaktivÃ©r_ikke/forsÃ¸g/forsinkelse/original_enheds-URI \n"
"Hvis 'deaktivÃ©r_ikke' er '1', vil beh altid afslutte, sÃ¥ kÃ¸en\n"
"aldrig deaktiveres, men pÃ¥ den anden side mistes\n"
"udskriftsjobs, hvis der er en fejl. \n"
"'ForsÃ¸g' er antal forsÃ¸g pÃ¥ at genkalde backenden i\n"
"tilfÃ¦lde af fejl. '0' betyder uendelige genforsÃ¸g. \n"
"'Forsinkelse' er antal sekunder mellem to forsÃ¸g\n"
"pÃ¥ at kalde backenden. \n"
"Den sidste parameter er den originale URI, som kÃ¸en havde fÃ¸r. \n"
"Eksempel: \n"
"beh:/1/3/5/socket://ip-adresse:portnummer \n"
"Backenden beh prÃ¸ver at tilgÃ¥ netvÃ¦rksprinteren printer 3 gange\n"
"med 5 sek. forsinkelse mellem forsÃ¸gene. Hvis tilgang stadig fejler,\n"
"deaktiveres kÃ¸en ikke, og udskriftsjobbene mistes. \n"
"For mere information kig pÃ¥ <tt>/usr/lib[64]/cups/backend/beh</tt>
og \n"
"http://www.linuxfoundation.org/en/OpenPrinting/Database/BackendErrorHandler \n"
""

#. PrintingViaNetworkDialog help 1/3:
#: src/helps.ycp:458
msgid ""
"\n"
"<big>Printing Via Network</big> \n"
"Usually CUPS (Common Unix Printing System) is used to print via network. \n"
"By default CUPS uses its so called 'Browsing' mode\n"
"to make printers available via network. \n"
"In this case remote CUPS servers must publish their printers via network\n"
"and accordingly on your host the CUPS daemon process (cupsd) must run\n"
"which is listening for incomming information about published printers. \n"
"CUPS Browsing information is recieved via UDP port 631.\n"
""
msgstr ""
"\n"
"<big>Udskrift via netvÃ¦rk</big> \n"
"Normalt benyttes CUPS (Common Unix Printing System) til udskrift via
netvÃ¦rk. \n"
"Som standard bruger CUPS dens sÃ¥kaldte 'browsing'-tilstand\n"
"til at gÃ¸re printere tilgÃ¦ngelige via netvÃ¦rk. \n"
"I sÃ¥ fald skal CUPS-servere publicere deres printere via netvÃ¦rk, og\n"
"fÃ¸lgelig skal CUPS-dÃ¦monprocessen (cupsd) kÃ¸re pÃ¥ din maskine.\n"
"Denne lytter efter information om publicerede printere. \n"
"CUPS' browsing-information modtages via UDP-port 631.\n"
""

#. PrintingViaNetworkDialog help 2/3:
#: src/helps.ycp:469
msgid ""
"\n"
"If you print only via network and if you use only one single CUPS server,\n"
"there is no need to use CUPS Browsing and have a CUPS daemon running on your
host.\n"
"Instead it is simpler to specify the CUPS server and access it directly.\n"
""
msgstr ""
"\n"
"Hvis du kun udskriver via netvÃ¦rk, og hvis du kun bruger en enkelt
CUPS-server,\n"
"behÃ¸ver du ikke benytte CUPS-browsing og have en CUPS-dÃ¦mon kÃ¸rende pÃ¥ din
vÃ¦rt.\n"
"I stedet er det enklere at angive CUPS-serveren og tilgÃ¥ den direkte.\n"
""

#. PrintingViaNetworkDialog help 3/3:
#: src/helps.ycp:475
msgid ""
"\n"
"If there is no CUPS server in your network or if you must additionally use\n"
"another kind of print server (e.g. print via a Windows/SMB server\n"
"or print via a traditional Unix LPR server) or if you must access\n"
"a network printer directly, you have to set up an appropriate print queue\n"
"on your host.\n"
""
msgstr ""
"\n"
"Hvis der ikke findes nogen CUPS-server pÃ¥ dit netvÃ¦rk, hvis du\n"
"yderligere skal bruge en anden slags udskriftserver (f.eks. udskrift\n"
"via en Windows/SMB server eller en traditionel Unix LPR-server),\n"
"eller hvis du skal tilgÃ¥ en netvÃ¦rksprinter direkte, skal du sÃ¦tte\n"
"en passende udskriftskÃ¸ op pÃ¥ din vÃ¦rt.\n"
""

#. SharingDialog help 1/2:
#: src/helps.ycp:485
msgid ""
"\n"
"<big>Sharing Print Queues and Publish Them Via Network</big> \n"
"Usually CUPS (Common Unix Printing System) should be set up to use\n"
"its so called 'Browsing' mode to make printers available via network. \n"
"In this case CUPS servers publish their local print queues via network\n"
"and accordingly on CUPS client systems the CUPS daemon process (cupsd) must
run\n"
"which is listening for incomming information about published printers. \n"
"CUPS Browsing information is recieved via UDP port 631.\n"
""
msgstr ""
"\n"
"<big>Dele udskriftskÃ¸er og publicere dem via netvÃ¦rk</big> \n"
"CUPS (Common Unix Printing System) skulle normalt vÃ¦re sat op til at bruge\n"
"dens sÃ¥kaldte 'browsing'-tilstand, for at gÃ¸re dem tilgÃ¦ngelige via
netvÃ¦rk. \n"
"I sÃ¥ fald publicerer CUPS-servere deres printere via netvÃ¦rk, og\n"
"fÃ¸lgelig skal CUPS-dÃ¦monprocessen (cupsd) kÃ¸re pÃ¥ din maskine.\n"
"Denne lytter efter information om publicerede printere. \n"
"CUPS' browsing-information modtages via UDP-port 631.\n"
""

#. SharingDialog help 2/2:
#: src/helps.ycp:495
msgid ""
"\n"
"First of all CUPS client systems must be allowed to access the CUPS server.\n"
"Then specify whether or not printers should be published to the clients.\n"
"It is not required to publish printers in any case.\n"
"If you have only one single CUPS server, there is no need to use CUPS
Browsing.\n"
"Instead it is simpler to specify the CUPS server on the client systems\n"
"(via 'Printing Via Network') so that the clients access the server directly.\n"
""
msgstr ""
"\n"
"Alle CUPS klientsystemer skal fÃ¸rst og fremmest have lov til at tilgÃ¥
CUPS-serveren.\n"
"Angiv derefter, hvorvidt printere skal publiceres til klienterne eller ej.\n"
"Det krÃ¦ves ikke, at printere skal publiceres i nogen tilfÃ¦lde.\n"
"Der er ingen grund til at bruge CUPS-browsing, hvis du blot har en enkelt
CUPS-server.\n"
"I stedet er det enklere at angive CUPS-serveren pÃ¥ klientsystemerne\n"
"(via 'Udskrift via netvÃ¦rk'), sÃ¥ klienterne kan tilgÃ¥ serveren direkte.\n"
""

#. Policies help 1/2:
#: src/helps.ycp:506
msgid ""
"\n"
"<big>CUPS Operation Policy</big> \n"
"Operation policies are the rules used for each operation in CUPS.\n"
"Such operations are for example 'print something', 'cancel a printout',\n"
"'configure a printer', 'modify or remove a printer configuration',\n"
"and 'enable or disable printing'.\n"
""
msgstr ""
"\n"
"<big>CUPS' handlingspolitik</big> \n"
"Handlingspolitik er reglerne, der anvendes til hver handling i CUPS.\n"
"SÃ¥danne handlinger kan f.eks. vÃ¦re 'skriv noget ud', 'annullÃ©r en
udskrift',\n"
"'konfigurÃ©r en printer', 'Ã¦ndr eller fjern en printerkonfiguration' og\n"
"'aktivÃ©r eller deaktivÃ©r udskrift'.\n"
""

#. Policies help 2/2:
#: src/helps.ycp:514
msgid ""
"\n"
"<big>CUPS Error Policy</big> \n"
"The error policy defines the default policy that is used when\n"
"CUPS fails to send a print job to the printer device. \n"
"Depending on the particular way how the printer is connected\n"
"(for example 'parallel', 'usb', 'socket', 'lpd', or 'ipp'),\n"
"and depending on the actual kind of failure,\n"
"the CUPS backend which actually sends the data to the printer\n"
"can overwrite the default error policy\n"
"and enforce another error policy (see 'man backend').\n"
"For example it can stop any further printing attempt\n"
"even when the default error policy is to retry the job.\n"
"This could happen when any attempt to establish\n"
"the communication with the printer is useless\n"
"so that it does no make sense to retry the job.\n"
" \n"
"The following error policies exist: \n"
"Stop the printer and keep the job for future printing. \n"
"Re-send the job from the beginning after waiting some time (30 seconds by
default). \n"
"Abort and delete the job and proceed with the next job.\n"
""
msgstr ""
"\n"
"<big>CUPS fejlpolitik</big> \n"
"Fejlpolitik definerer den standardpolitik, der anvendes, nÃ¥r\n"
"CUPS fejler i at sende et udskriftjob til printer-enheden. \n"
"AfhÃ¦ngigt af mÃ¥den printeren er tilsluttet (f.eks. 'usb',\n"
"'socket', 'lpd' eller 'ipp'), og afhÃ¦ngigt af den aktuelle\n"
"fejl, kan den backend til CUPS, som faktisk sender data til\n"
"printeren, overskrive standard-fejlpolitikken og\n"
"gennemtvinge en anden fejlpolitik\n"
"(se 'man backend').\n"
"Den kan f.eks. stoppe videre forsÃ¸g pÃ¥ udskrivning,\n"
"selvom standard-fejlpolitikken er at forsÃ¸ge igen.\n"
"Dette kan ske, nÃ¥r et forsÃ¸g pÃ¥ at etablere en\n"
"kommunikation med printeren er nyttelÃ¸s, sÃ¥ledes\n"
"er der ingen fornuft i at forsÃ¸ge jobbet igen.\n"
" \n"
"FÃ¸lgende fejlpolitikker findes: \n"
"Stop printeren, og gem jobbet til senere udskrivning. \n"
"Send jobbet igen fra begyndelsen efter at have ventet en tid (standard 30
sekunder). \n"
"Afbryd og slet jobbet, og gÃ¥ videre til det nÃ¦ste job.\n"
""

#. Autoconfig help 1/1:
#: src/helps.ycp:538
msgid ""
"\n"
"<big>CUPS Autoconfiguration for USB Printers</big> \n"
"When a USB printer is connected to the system\n"
"cups-autoconfig determines if the printer is already configured. \n"
"If it is already configured, printing is enabled.\n"
"If the printer is not configured, cups-autoconfig attempts\n"
"to select an appropriate driver for it and, if successful,\n"
"cups-autoconfig configures it.\n"
"When a USB printer is removed, cups-autoconfig can disable printing.\n"
""
msgstr ""
"\n"
"<big>Automatisk konfiguration af CUPS for USB-printere</big> \n"
"NÃ¥r en USB-printer tilsluttes systemet afgÃ¸r cups-autoconfig\n"
"om printeren allerede er konfigureret.\n"
"Hvis dette er tilfÃ¦ldet, er udskrift aktiveret.\n"
"Hvis printeren derimod ikke er konfigureret vil cups-autoconfig\n"
"forsÃ¸ge at vÃ¦lge en passende driver for den, og, hvis det lykkes,\n"
"konfigurere denne.\n"
"NÃ¥r en USB-printer fjernes, kan cups-autoconfig deaktivere udskrift.\n"
""

#. Useless help 1/1:
#: src/helps.ycp:551
msgid ""
"\n"
"<big>Intentionally no help</big> \n"
"This is an experimental YaST module. \n"
"The dialog should be self-explanatory. \n"
"Usability experts state that a UI is very likely\n"
"bad designed when explanation texts are needed. \n"
"For a real test whether the dialog is self-explanatory or not,\n"
"there must be no help text at all. \n"
"Unfortunately it is not possible to remove the\n"
"help sub-window from 'Wizard' dialogs\n"
"(this dialog is a so called 'Wizard' dialog).\n"
""
msgstr ""
"\n"
"<big>Bevidst ingen hjÃ¦lp</big> \n"
"Dette er et eksperimentelt YaST-modul. \n"
"Dialogen skulle vÃ¦re selvforklarende. \n"
"Eksperter i brugervenlighed udtaler, at hvis forklarende tekster\n"
"er nÃ¸dvendige, er den grafiske brugerflade dÃ¥rligt designet. \n"
"For virkelig at teste, om dialogen er selvforklarende eller ej,\n"
"mÃ¥ der slet ikke vÃ¦re nogen hjÃ¦lpetekst. \n"
"DesvÃ¦rre er det ikke muligt at fjerne sub-vinduet 'HjÃ¦lp' fra\n"
"'guide'-dialogerne (denne dialog er en sÃ¥kaldt guide-dialog).\n"
""

#
#. Label for CheckBoxes to select local and/or remote print queues to be listed:
#: src/overview.ycp:50
msgid "Show"
msgstr "Vis"

#. CheckBox to select local print queues to be listed:
#: src/overview.ycp:57
msgid "&Local"
msgstr "&Lokal"

#. CheckBox to select remote print queues to be listed:
#: src/overview.ycp:64
msgid "&Remote"
msgstr "Ekste&rn"

#. Header of a Table column with a list of print queues.
#. Where the queue configuration exists (local or remote):
#: src/overview.ycp:86
msgid "Configuration"
msgstr "Konfiguration"

#. Header of a Table column with a list of print queues.
#. Print queue name:
#: src/overview.ycp:89
msgid "Name"
msgstr "Navn"

#. Header of a Table column with a list of print queues.
#. Location of the printer (e.g. second floor, room 2.3):
#: src/overview.ycp:95
msgid "Location"
msgstr "Placering"

#
#. Header of a Table column with a list of print queues.
#. Whether or not is is the default queue:
#: src/overview.ycp:98
msgid "Default"
msgstr "Standard"

#. Header of a Table column with a list of print queues.
#. Queue status (accepting/rejecting and enabled/disabled):
#: src/overview.ycp:101
msgid "Status"
msgstr "Status"

# push button label
#. PushButton label to modify an already configured print queue:
#: src/overview.ycp:111
msgid "&Configure"
msgstr "&KonfigurÃ©r"

#. PushButton label to refresh the list of print queues:
#: src/overview.ycp:118
msgid "Re&fresh List"
msgstr "Genop&frisk liste"

#
#. PushButton label to print a test page:
#: src/overview.ycp:122
msgid "Print &Test Page"
msgstr "Udskriv &testside"

#
#. Show the CUPS server name if it is a client-only config
#. where %1 will be replaced by the CUPS server name.
#: src/overview.ycp:143
#, ycp-format
msgid "CUPS Server %1"
msgstr "CUPS-server %1"

#
#. Body of a Popup::AnyMessage when no queue was selected from the list:
#: src/overview.ycp:241 src/overview.ycp:288 src/overview.ycp:382
msgid "Select an entry."
msgstr "VÃ¦lg en indgang."

#. Header of a Popup::AnyMessage when a remote queue was selected to be deleted:
#: src/overview.ycp:247
msgid "Cannot Delete"
msgstr "Kan ikke slette"

#. Body of a Popup::AnyMessage when a remote queue was selected to be deleted:
#: src/overview.ycp:249
msgid "This is a remote configuration. Only local configurations can be
deleted."
msgstr "Denne er en ekstern konfiguration. Kun lokale konfigurationer kan
slettes."

#. Header of a confirmation popup before a queue will be deleted:
#: src/overview.ycp:254
msgid "Confirm Deletion"
msgstr "BekrÃ¦ft sletning"

#. Body of a confirmation popup before a queue will be deleted:
#: src/overview.ycp:256
msgid "The selected configuration would be deleted immediately and cannot be
restored."
msgstr "Den valgte konfiguration vil blive slettet omgÃ¥ende og kan ikke
genoprettes."

#
#. 'Yes' button label of a confirmation popup before a queue will be deleted:
#: src/overview.ycp:258
#, ycp-format
msgid "Delete configuration %1"
msgstr "Slet konfiguration %1"

#. 'No' button label of a confirmation popup before a queue will be deleted:
#: src/overview.ycp:260
msgid "Do not delete it"
msgstr "Slet den ikke"

#
#. Message of a Popup::Error
#. where %1 will be replaced by the queue name.
#. Only a simple message because before the function Printer::DeleteQueue
#. was called and this function would have shown more specific messages.
#: src/overview.ycp:272
#, ycp-format
msgid "Failed to delete configuration %1."
msgstr "Sletning af konfiguration %1 fejlede."

#
#. Header of a Popup::AnyMessage when the queue rejects print jobs:
#: src/overview.ycp:294
msgid "Rejecting Print Jobs"
msgstr "Afviser udskriftsjobs"

#. Body of a Popup::AnyMessage when the queue rejects print jobs:
#: src/overview.ycp:296
msgid "The testpage cannot be printed because print jobs are rejected."
msgstr "Denne testside kan ikke udskrives, da udskriftsjobs afvises."

#. Header of a Popup::AnyMessage when printing is disabled for the queue:
#: src/overview.ycp:302
msgid "Printout Disabled"
msgstr "Udskrift deaktiveret"

#. Body of a Popup::AnyMessage when printing is disabled for the queue:
#: src/overview.ycp:304
msgid "The testpage cannot be printed because printout is disabled."
msgstr "Denne testside kan ikke udskrives, da udskrift er deaktiveret."

#. Message of a Popup::Error
#. where %1 will be replaced by the queue name.
#. Only a simple message because this error does not happen on a normal system
#. (i.e. a system which is not totally broken or totally messed up).
#: src/overview.ycp:320
#, ycp-format
msgid "Failed to print testpage for %1."
msgstr "Udskrift af testside for %1 fejlede."

#. Popup message
#. where %1 will be replaced by the queue name.
#: src/overview.ycp:326
#, ycp-format
msgid "Sent testpage to %1. It should start to print soon."
msgstr "Sendte testside til %1. Udskrift skulle starte om et Ã¸jeblik."

#
#. PopupYesNoHeadline headline
#. where %1 will be replaced by the server name:
#. It was initially a client-only config,
#. but now the user has activated the "Get browsing info" radio button.
#. "Get browsing info" means "no longer client-only" regardless
#. if the browse_allow_value string is effectively empty or it contains "none"
#. so that the client-only config is to be disabled in any case:
#. PopupYesNoHeadline headline
#. where %1 will be replaced by the server name:
#: src/overview.ycp:341 src/policies.ycp:123 src/printingvianetwork.ycp:476
#: src/sharing.ycp:542
#, ycp-format
msgid "Disable remote CUPS server '%1'"
msgstr "DeaktivÃ©r ekstern CUPS-server '%1'"

#. PopupYesNoHeadline body:
#: src/overview.ycp:343
msgid "A remote CUPS server setting conflicts with adding a configuration."
msgstr "En ekstern CUPS serverindstilling konflikter med tilfÃ¸jelse af
konfiguration."

#. Popup::ErrorDetails message.
#. Only a simple message because this error does not happen on a normal system
#. (i.e. a system which is not totally broken or totally messed up).
#. Popup::ErrorDetails message:
#: src/overview.ycp:353 src/policies.ycp:139 src/printingvianetwork.ycp:431
#: src/printingvianetwork.ycp:486 src/printingvianetwork.ycp:594
#: src/sharing.ycp:558
msgid "Failed to remove the 'ServerName' entry in /etc/cups/client.conf"
msgstr "Fjernelse af indgangen 'ServerName' i /etc/cups/client.conf fejlede"

#. Header of a Popup::AnyMessage when a remote queue was selected to be
modified:
#: src/overview.ycp:388
msgid "Cannot Modify"
msgstr "Kan ikke Ã¦ndre"

#. Body of a Popup::AnyMessage when a remote queue was selected to be modified:
#: src/overview.ycp:390
msgid "This is a remote configuration. Only local configurations can be
modified."
msgstr "Dette er en ekstern konfiguration. Kun lokale konfigurationer kan
Ã¦ndres."

#. An entry for a ComboBox from which the user can select that the CUPS error
policy
#. which is used when it fails to send a job to the printer is to
#. stop the printer and keep the job for future printing:
#: src/policies.ycp:44
msgid "stop the printer and keep the job for future printing"
msgstr "stop printeren, og gem jobbet til senere udskrivning"

#. An entry for a ComboBox from which the user can select that the CUPS error
policy
#. which is used when it fails to send a job to the printer is to
#. re-send the job from the beginning after waiting some time
#. (the default JobRetryInterval is 30 seconds but this can be changed):
#: src/policies.ycp:49
msgid "re-send the job from the beginning after waiting some time"
msgstr "send jobbet igen fra begyndelsen efter at have ventet en tid"

#. An entry for a ComboBox from which the user can select that the CUPS error
policy
#. which is used when it fails to send a job to the printer is to
#. abort and delete the job and proceed with the next job:
#: src/policies.ycp:53
msgid "abort and delete the job and proceed with the next job"
msgstr "afbryd og slet jobbet, og gÃ¥ videre til det nÃ¦ste job"

#. Header for a ComboBox to specify the CUPS error policy:
#: src/policies.ycp:70
msgid "Specify the &error policy"
msgstr "Angiv f&ejlpolitikken"

#. CheckBox to apply the CUPS error policy which is selected in the ComboBox
above
#. to all local printer configurations (i.e. to all local print queues).
#. When possible we perefer to use the wording "printer configuration"
#. instead of "print queue" because the latter may sound too technical
#. but sometimes (e.g. in the Connection Wizard) we must use the exact
technical term:
#: src/policies.ycp:85
msgid "&Apply this error policy to all local printer configurations"
msgstr "&Anvend denne fejlpolitik pÃ¥ alle lokale printerkonfigurationer"

#. Header for a ComboBox to specify the CUPS operation policy:
#: src/policies.ycp:93
msgid "Specify the &operation policy"
msgstr "Angiv handlingsp&olitikken"

#. CheckBox to apply the CUPS operation policy which is selected in the
ComboBox above
#. to all local printer configurations (i.e. to all local print queues).
#. When possible we perefer to use the wording "printer configuration"
#. instead of "print queue" because the latter may sound too technical
#. but sometimes (e.g. in the Connection Wizard) we must use the exact
technical term:
#: src/policies.ycp:105
msgid "Apply this operation &policy to all local printer configurations"
msgstr "Anvend denne handlings&politik pÃ¥ alle lokale printerkonfigurationer."

#. PopupYesNoHeadline body:
#: src/policies.ycp:127
msgid "A remote CUPS server setting conflicts with setting policies for the
local system."
msgstr "En ekstern CUPS serverindstilling konflikter med opsÃ¦tningspolitikker
for det lokale system."

#. Popup::ErrorDetails message
#. where %1 will be replaced by the print queue name.
#: src/policies.ycp:267
#, ycp-format
msgid "Failed to apply the policy to '%1'"
msgstr "Anvendelse af fejlpolitikken pÃ¥ '%1' fejlede."

#. Popup::ErrorDetails message
#. where %1 will be replaced by the default operation policy value.
#. Do not change or translate "DefaultPolicy", it is a system settings name.
#: src/policies.ycp:282
#, ycp-format
msgid "Failed to set 'DefaultPolicy %1' in /etc/cups/cupsd.conf"
msgstr "Mislykkedes at sÃ¦tte 'DefaultPolicy %1' i /etc/cups/cupsd.conf"

#. Popup::ErrorDetails message
#. where %1 will be replaced by the default error policy value.
#. Do not change or translate "ErrorPolicy", it is a system settings name.
#: src/policies.ycp:295
#, ycp-format
msgid "Failed to set 'ErrorPolicy %1' in /etc/cups/cupsd.conf"
msgstr "Mislykkedes at sÃ¦tte 'ErrorPolicy %1' i /etc/cups/cupsd.conf"

#
#. Command line help text for the Xprinter module
#: src/printer.ycp:54
msgid "Configuration of printer"
msgstr "Konfiguration af printer"

#
#: src/printer_proposal.ycp:68
msgid "No printer queue configured."
msgstr "Ingen printerkÃ¸ konfigureret"

#. Rich text title for Printer in proposals
#: src/printer_proposal.ycp:91
msgid "Printer"
msgstr "Printer"

#. Menu title for Printer in proposals
#: src/printer_proposal.ycp:93
msgid "&Printer"
msgstr "&Printer"

#. An entry for a ComboBox from which the user can select
#. that printer information is accepted from
#. all remote CUPS servers:
#: src/printingvianetwork.ycp:48
msgid "all hosts"
msgstr "alle vÃ¦rter"

#. An entry for a ComboBox from which the user can select
#. that printer information is accepted from
#. remote CUPS servers in the local network:
#: src/printingvianetwork.ycp:52
msgid "hosts in the local network"
msgstr "vÃ¦rter pÃ¥ det lokale netvÃ¦rk"

#. An entry for a ComboBox from which the user can select
#. that printer information is accepted only from
#. remote CUPS servers with specific addresses
#. where the specific addresses are specified in a TextEntry below:
#: src/printingvianetwork.ycp:57
msgid "only specific addresses"
msgstr "kun specifikke adresser"

#. A caption for a Frame to set up to use CUPS to print via network:
#: src/printingvianetwork.ycp:63
msgid "Use CUPS to Print Via Network"
msgstr "Brug CUPS til udskrift via netvÃ¦rk"

#. A RadioButton to not receive printer information from remote CUPS servers:
#: src/printingvianetwork.ycp:72
msgid "&Do not Receive Printer Information from Remote CUPS servers"
msgstr "Mo&dtag ikke printerinformation fra eksterne CUPS-servere"

#
#. A RadioButton to receive printer information from remote CUPS servers:
#: src/printingvianetwork.ycp:80
msgid "Receive Printer &Information from Remote CUPS servers"
msgstr "Modtag printer&information fra eksterne CUPS-servere"

#. A header for a section to set up from which remote CUPS servers
#. printer information is accepted:
#: src/printingvianetwork.ycp:91
msgid "Accept Information from the Following Servers"
msgstr "AcceptÃ©r information fra de fÃ¸lgende servere"

#. A header for a ComboBox from which the user can select
#. a usual general setting from which remote CUPS servers
#. printer information is accepted:
#: src/printingvianetwork.ycp:101
msgid "Usual &General Setting"
msgstr "Normal &generel indstilling"

#. A header for a TextEntry where the user can optionally
#. enter specific IP addresses and/or network/netmask
#. from where remote printer information is accepted:
#: src/printingvianetwork.ycp:114
msgid "Optional Specific IP Addresses or &Network/Netmask"
msgstr "Valgfrie specifikke IP-adresser eller &netvÃ¦rk/netmaske"

#. Label to show the syntax for the TextEntry where the user can
#. enter specific IP addresses and/or network/netmask
#. from where remote printer information is accepted:
#. Label to show the syntax for the TextEntry to allow remote access
#. to local print queues from IP addresses and/or networks:
#: src/printingvianetwork.ycp:123 src/sharing.ycp:171
msgid "(each nnn.nnn.nnn.nnn or nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm separated by
one space)"
msgstr "(hvert nnn.nnn.nnn.nnn eller nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm adskilt
med Ã©t mellemrum)"

#. A RadioButton to do all printing tasks directly
#. only via one single remote CUPS server:
#: src/printingvianetwork.ycp:135
msgid "Do All Your Printing Directly via &One Remote CUPS Server"
msgstr "F&oretag alle dine udskrifter direkte via Ã©n ekstern CUPS-server"

#. A header for a TextEntry where the user can enter
#. the one single remote CUPS server which is used
#. to do all his printing tasks:
#: src/printingvianetwork.ycp:147
msgid "&Hostname / IP Address"
msgstr "&VÃ¦rtsnavn / IP-adresse"

#. A PushButton to test whether or not the one single remote CUPS server
#. which is used to do all printing tasks is accessible:
#: src/printingvianetwork.ycp:156
msgid "&Test Server"
msgstr "&Test server"

#. A caption for a Frame to set up to use another (i.e. non-CUPS) print server
#. or to set up to use a network printer directly:
#: src/printingvianetwork.ycp:168
msgid "Use Another Print Server or Use a Network Printer Directly"
msgstr "Brug en anden udskriftserver, eller brug en netvÃ¦rksprinter direkte"

#. Popup message
#. where %1 will be replaced by the server name.
#: src/printingvianetwork.ycp:184
#, ycp-format
msgid "The server '%1' is accessible via port 631 (IPP/CUPS)."
msgstr "Serveren '%1' er tilgÃ¦ngelig via port 631 (IPP/CUPS)."

#. Popup message
#. where %1 will be replaced by the server name.
#: src/printingvianetwork.ycp:189
#, ycp-format
msgid "The server '%1' is not accessible via port 631 (IPP/CUPS)."
msgstr "Serveren '%1' er ikke tilgÃ¦ngelig via port 631 (IPP/CUPS)."

#. Popup message
#. where %1 will be replaced by the server name.
#: src/printingvianetwork.ycp:194
#, ycp-format
msgid "The server '%1' responds to a 'ping' in the network."
msgstr "Serveren '%1' svarer pÃ¥ et 'ping' pÃ¥ netvÃ¦rket."

#. Popup message
#. where %1 will be replaced by the server name.
#: src/printingvianetwork.ycp:199
#, ycp-format
msgid "The server '%1' does not respond to a 'ping' in the network."
msgstr "Serveren '%1' svarer ikke pÃ¥ et 'ping' pÃ¥ netvÃ¦rket."

#. Popup message
#. where %1 will be replaced by the server name.
#: src/printingvianetwork.ycp:204
#, ycp-format
msgid "The server name '%1' is known in the network."
msgstr "Servernavnet '%1' er kendt pÃ¥ netvÃ¦rket."

#. Popup message
#. where %1 will be replaced by the server name.
#: src/printingvianetwork.ycp:209
#, ycp-format
msgid "The server name '%1' is not known in the network."
msgstr "Servernavnet '%1' er ikke kendt pÃ¥ netvÃ¦rket."

#. netcat is required for a meaningful test.
#. Show negative feedback:
#. Popup::ErrorDetails message:
#: src/printingvianetwork.ycp:225
msgid "Cannot execute the program 'netcat'"
msgstr "Kan ikke eksekvere programmet 'netcat'"

#. Popup::ErrorDetails details:
#: src/printingvianetwork.ycp:227
msgid "The RPM package 'netcat' is required for a meaningful test."
msgstr "RPM-pakken 'netcat' krÃ¦ves, for at testen giver mening."

#. ping is required for the less meaningful test.
#. Show negative feedback:
#. Popup::ErrorDetails message
#: src/printingvianetwork.ycp:261
msgid "Cannot execute the program 'ping'"
msgstr "Kan ikke eksekvere programmet 'ping'"

#. Popup::ErrorDetails details:
#: src/printingvianetwork.ycp:263
msgid "The RPM package 'iputils' is required for a meaningful test."
msgstr "RPM-pakken 'iputils' krÃ¦ves, for at testen giver mening."

#. The netcat-test failed but the ping-test was successful.
#. Show negative feedback:
#. Popup::ErrorDetails message
#. where %1 will be replaced by the server name.
#: src/printingvianetwork.ycp:276
#, ycp-format
msgid "The server '%1' is not accessible"
msgstr "Serveren '%1' er ikke tilgÃ¦ngelig"

#. host is required for the last test.
#. Show negative feedback:
#. Popup::ErrorDetails message
#: src/printingvianetwork.ycp:298
msgid "Cannot execute the program 'host'"
msgstr "Kan ikke eksekvere programmet 'host'"

#. Popup::ErrorDetails details:
#: src/printingvianetwork.ycp:300
msgid "The RPM package 'bind-utils' is required for a meaningful test."
msgstr "RPM-pakken 'bind-utils' krÃ¦ves, for at testen giver mening."

#. The netcat-test and the ping-test failed but the host-test was successful.
#. Show negative feedback:
#. Popup::ErrorDetails message
#. where %1 will be replaced by the server name.
#: src/printingvianetwork.ycp:313
#, ycp-format
msgid "The server '%1' does not respond in the network"
msgstr "Serveren '%1' svarer ikke pÃ¥ netvÃ¦rket"

#. The netcat-test and the ping-test and the host-test failed:
#. Show negative feedback:
#. Popup::ErrorDetails message
#. where %1 will be replaced by the server name.
#: src/printingvianetwork.ycp:329
#, ycp-format
msgid "The server '%1' is unknown"
msgstr "Serveren '%1' er ukendt"

#. Popup::ErrorDetails message:
#: src/printingvianetwork.ycp:366
msgid "Failed to set 'BrowseAllow none' in /etc/cups/cupsd.conf"
msgstr "Mislykkedes at sÃ¦tte 'BrowseAllow none' i /etc/cups/cupsd.conf"

#. A "Get browsing info" config with a local cupsd was switched
#. to a "No browsing info" config with a local running cupsd.
#. The Printerlib::GetAndSetCupsdStatus("restart") function
#. already waits 40 seconds but the default BrowseTimeout value
#. for the local cupsd is 5 minutes.
#. Therefore it takes by default 5 minutes until printer information
#. that was previously received by Browsing is removed (via timeout)
#. from the local cupsd's list.
#. I assume most users do not like to wait 5 minutes which is no problem
#. because they can just click the [OK] button to continue but then
#. they are at least informend why there may be still remote queues:
#. Popup message:
#: src/printingvianetwork.ycp:388
msgid ""
"When switching from 'receive information' to 'do not receive information'\n"
"it takes usually 5 minutes until already received information faded away..."
msgstr ""
"Under skift fra 'modtag information' til 'modtag ikke information' tager\n"
"det normalt 5 minutter, fÃ¸r allerede modtaget information fortoner sig..."

#. Popup::ErrorDetails message
#. where %1 will be replaced by the server name.
#: src/printingvianetwork.ycp:419 src/printingvianetwork.ycp:681
#, ycp-format
msgid "Failed to set 'ServerName %1' in /etc/cups/client.conf"
msgstr "Mislykkedes at sÃ¦tte 'ServerName %1' i /etc/cups/client.conf"

#. PopupYesNoHeadline body:
#: src/printingvianetwork.ycp:478
msgid "A remote CUPS server setting conflicts with receiving printer
information."
msgstr "En ekstern CUPS serverindstilling konflikter med modtagelse af
printerinformation."

#. Popup::ErrorDetails message:
#: src/printingvianetwork.ycp:539 src/sharing.ycp:500
msgid "Failed to set 'Browsing On' in /etc/cups/cupsd.conf"
msgstr "Mislykkedes at sÃ¦tte 'Browsing On' i /etc/cups/cupsd.conf"

#. Popup::ErrorDetails message
#. where %1 will be replaced by the values for BrowseAllow.
#: src/printingvianetwork.ycp:553
#, ycp-format
msgid "Failed to set BrowseAllow value(s) '%1' in /etc/cups/cupsd.conf"
msgstr "Mislykkedes at sÃ¦tte BrowseAllow-vÃ¦rdierne '%1' i
/etc/cups/cupsd.conf"

#. Header of a Popup::ContinueCancelHeadline
#. when a client-only server is not accessible
#. where %1 will be replaced by the server name:
#: src/printingvianetwork.ycp:616
#, ycp-format
msgid "Continue regardless that '%1' is not accessible?"
msgstr "Vil du fortsÃ¦tte, selvom '%1' ikke er tilgÃ¦ngelig?"

#. Body of a Popup::ContinueCancelHeadline
#. when a client-only server is not accessible:
#: src/printingvianetwork.ycp:621
msgid "A non-accessible server leads to an endless sequence of further
failures."
msgstr "En ikke-tilgÃ¦ngelig server fÃ¸rer til en uendelig sekvens af
yderligere fejl."

#. The user has decided to continue regardless that the client-only server is
not accessible.
#. In this case the cups_client_only tool fails in any case because it also
tests accessibility.
#. But cups_client_only might have failed for whatever other reason.
#. Therefore a Popup::MessageDetails is shown to inform about the actual result:
#. Popup::MessageDetails message
#. where %1 will be replaced by the server name.
#: src/printingvianetwork.ycp:673
#, ycp-format
msgid "Tried to set 'ServerName %1' in /etc/cups/client.conf"
msgstr "PrÃ¸vede at sÃ¦tte 'ServerName %1' i /etc/cups/client.conf"

#
#. A RadioButton label to deny remote access to local print queues:
#: src/sharing.ycp:65
msgid "&Deny remote access"
msgstr "NÃ¦gt ekstern a&dgang"

#
#. A RadioButton label to allow remote access to local print queues:
#: src/sharing.ycp:75
msgid "&Allow remote access"
msgstr "Till&ad ekstern adgang"

#. A CheckBox label to allow remote access to local print queues
#. for computers within the local network:
#: src/sharing.ycp:91
msgid "For computers within the &local network"
msgstr "Til computere indenfor det &lokale netvÃ¦rk"

#. A CheckBox label to publish local print queues by default within the local
network:
#: src/sharing.ycp:102
msgid "&Publish printers by default within the local network"
msgstr "&PublicÃ©r printere som standard indenfor det lokale netvÃ¦rk"

#. A caption for a table to allow remote access to local print queues
#. via network interfaces specified in the table below:
#: src/sharing.ycp:113
msgid "Via network interfaces specified below"
msgstr "Via netvÃ¦rksgrÃ¦nsefladerne angivet herunder"

#
#. A table column header where the column lists network interfaces:
#: src/sharing.ycp:121
msgid "Interface"
msgstr "GrÃ¦nseflade"

#. A table column header where the column shows whether or not
#. local print queues are published by default
#. via the network interface in the other table column:
#: src/sharing.ycp:125
msgid "Publish printers by default via this interface"
msgstr "PublicÃ©r printere som standard via denne grÃ¦nseflade"

#. A PushButton label to add a network interface to the table which shows
#. the network interfaces to allow remote access to local print queues:
#: src/sharing.ycp:135
msgid "&Add"
msgstr "&TilfÃ¸j"

#. A PushButton label to change a network interface in the table which shows
#. the network interfaces to allow remote access to local print queues:
#: src/sharing.ycp:141
msgid "&Edit"
msgstr "&RedigÃ©r"

#. A PushButton label to delete a network interface from the table which shows
#. the network interfaces to allow remote access to local print queues:
#: src/sharing.ycp:147
msgid "&Delete"
msgstr "&Slet"

#. A caption to allow remote access to local print queues
#. for hosts and/or networks specified in two TextEntries below:
#: src/sharing.ycp:156
msgid "For Experts: Optional Specific IP Addresses or Networks"
msgstr "For eksperter: Valgfrie specifikke IP-adresser eller netvÃ¦rk"

#. TextEntry to allow remote access to local print queues
#. for hosts and/or networks:
#: src/sharing.ycp:163
msgid "Allow remote access from those IP addresses or &network/netmask"
msgstr "Tillad ekstern adgang fra disse IP-adresser eller &netvÃ¦rk/netmaske"

#. TextEntry to publish local print queues
#. to IP addresses and/or network broadcast addresses:
#: src/sharing.ycp:181
msgid "Publish to those IP addresses or network &broadcast addresses"
msgstr "PublicÃ©r til disse IP-adresser eller netvÃ¦rk-&broadcast-adresser"

#. Label to show the syntax for the TextEntry to to publish
#. local print queues to hosts and/or networks:
#: src/sharing.ycp:192
msgid "(each nnn.nnn.nnn.nnn or nnn.nnn.nnn.255 separated by one space)"
msgstr "(hvert nnn.nnn.nnn.nnn eller nnn.nnn.nnn.255 adskilt med Ã©t mellemrum)"

#. A caption to make Firewall settings to allow remote access to CUPS:
#: src/sharing.ycp:205
msgid "Firewall Settings"
msgstr "Firewall-indstillinger"

#. A CheckBox label to publish local print queues by default
#. via a partivular network interface which is shown below.
#: src/sharing.ycp:240
msgid "&Publish printers by default via the network interface below."
msgstr "&PublicÃ©r printere som standard via netvÃ¦rksgrÃ¦nsefladen herunder."

#. A header for a ComboBox which lists network interfaces:
#: src/sharing.ycp:247
msgid "Available Network &Interfaces:"
msgstr "TilgÃ¦ngelige netvÃ¦rks&grÃ¦nseflader:"

#. Popup::ErrorDetails message.
#. Do not change or translate "Listen localhost", it is a system settings name.
#: src/sharing.ycp:376
msgid "Failed to set only 'Listen localhost' in /etc/cups/cupsd.conf"
msgstr "Mislykkedes kun at sÃ¦tte 'Listen localhost' i /etc/cups/cupsd.conf"

#. Popup::ErrorDetails message.
#. Do not change or translate "Allow", it is a system settings name.
#: src/sharing.ycp:384
msgid "Failed to remove 'Allow' entries from /etc/cups/cupsd.conf"
msgstr "Mislykkedes at fjerne 'Allow'-indgange fra /etc/cups/cupsd.conf"

#. Popup::ErrorDetails message.
#. Do not change or translate "BrowseAddress", it is a system settings name.
#: src/sharing.ycp:397
msgid "Failed to remove 'BrowseAddress' entries from /etc/cups/cupsd.conf"
msgstr "Mislykkedes at fjerne 'BrowseAddress'-indgange fra /etc/cups/cupsd.conf"

#. Popup::ErrorDetails message
#. where %1 will be replaced by one or more system settings values.
#. Do not change or translate "Allow", it is a system settings name.
#: src/sharing.ycp:472
#, ycp-format
msgid "Failed to set 'Allow' entries '%1' in /etc/cups/cupsd.conf"
msgstr "Mislykkedes at sÃ¦tte 'Allow'-indgangene '%1' i /etc/cups/cupsd.conf"

#. Popup::ErrorDetails message
#. where %1 will be replaced by one or more system settings values.
#. Do not change or translate "BrowseAddress", it is a system settings name.
#: src/sharing.ycp:489
#, ycp-format
msgid "Failed to set 'BrowseAddress' entries '%1' in /etc/cups/cupsd.conf"
msgstr "Mislykkedes at sÃ¦tte 'BrowseAddress'-indgangene '%1' i
/etc/cups/cupsd.conf"

#. Popup::ErrorDetails message.
#. Do not change or translate "Listen *:631", it is a system settings name.
#: src/sharing.ycp:515
msgid "Failed to set 'Listen *:631' in /etc/cups/cupsd.conf"
msgstr "Mislykkedes at sÃ¦tte 'Listen *:631' i /etc/cups/cupsd.conf"

#. PopupYesNoHeadline body:
#: src/sharing.ycp:546
msgid "A remote CUPS server setting conflicts with sharing local printer
configurations."
msgstr "En ekstern CUPS serverindstilling konflikter med deling af lokale
printerkonfigurationer."

#. Label when not the Suse Firewall but another firewall is used:
#: src/sharing.ycp:820
msgid "Not the Suse Firewall but another firewall is used"
msgstr "Ikke SuSEfirewall2 men en anden firewall bruges"

#. Label when the Suse Firewall is not running:
#: src/sharing.ycp:837
msgid "The Suse Firewall is not active"
msgstr "SuSEfirewall2 er ikke aktiv"

#. CheckBox whether or not the Suse Firewall allows CUPS access from the INT
zone:
#: src/sharing.ycp:855
msgid "Allow access from the internal network zone"
msgstr "Tillad adgang fra den interne netvÃ¦rkszone"

#. Label when the Suse Firewall does not potect the internal network zone
#. which means that CUPS access from the INT zone is allowed:
#: src/sharing.ycp:868
msgid "Access from the internal network zone is allowed"
msgstr "Adgang fra den interne netvÃ¦rkszone tillades"

#. CheckBox whether or not the Suse Firewall denies CUPS access from the EXT
zone:
#: src/sharing.ycp:879
msgid "Deny access from the external network zone"
msgstr "NÃ¦gt adgang fra den eksterne netvÃ¦rkszone"

#. Label when the Suse Firewall denies CUPS access from the external network
zone:
#: src/sharing.ycp:892
msgid "Access from the external network zone is denied"
msgstr "Adgang fra den eksterne netvÃ¦rkszone nÃ¦gtes"

#
#. Initialization dialog caption
#: src/wizards.ycp:136
msgid "Printer Configuration"
msgstr "Konfiguration af printer"

#. Initialization dialog contents
#: src/wizards.ycp:138
msgid "Initializing..."
msgstr "Initialiserer..."

< Previous

Next >

Mailinglist Archive: opensuse-da (29 mails)

[opensuse-da] yast - printer.da.po (igen-igen-igen)

Search this list

List Navigation

This Thread

References