printer - en to unknown language translation catalogue (326 entries)

note: Header of a DownloadProgress indicator: Busy message: Body of a Popup::ShowFeedback:
en: Retrieving printer driver information...
target: Henter information om printer-drivere...

note: Popup::ErrorDetails message. Only a simple message because this error does not happen on a normal system (i.e. a system which is not totally broken or totally messed up).
en: Failed to create PPD database.
target: Oprettelse af PPD-database fejlede.

note: Message of a Popup::Error where %1 will be replaced by the file name. Only a simple message because this error does not happen on a normal system (i.e. a system which is not totally broken or totally messed up).
en: File %1 does not exist.
target: Filen %1 findes ikke.

note: Message of a Popup::Error where %1 will be replaced by the file name. Only a simple message because this error does not happen on a normal system (i.e. a system which is not totally broken or totally messed up).
en: Failed to read %1.
target: L��sning af %1 fejlede.

note: Header for a finished ProgressBar:
en: Retrieved printer driver information
target: Hentede information om printer-drivere

note: Header of a DownloadProgress indicator: Busy message: Body of a Popup::ShowFeedback:
en: Detecting printers...
target: S��ger efter printere...

note: Popup::ErrorDetails message. Only a simple message because this error does not happen on a normal system (i.e. a system which is not totally broken or totally messed up). Do not confuse this error with the case when no printer was autodetected. The latter results no error.
en: Failed to detect printers automatically.
target: Automatisk s��gning efter printere fejlede.

note: Header for a finished ProgressBar:
en: Detected printers
target: Fundne printere

note: Popup::ErrorDetails message. Only a simple message because this error does not happen on a normal system (i.e. a system which is not totally broken or totally messed up). Do not confuse this error with the case when no queue was detected (e.g. simply because there is no queue). This results no error
en: Failed to detect print queues.
target: S��gning efter udskriftsk��er fejlede.

note: Popup::ErrorDetails message where %1 will be replaced by the queue name. Only a simple message because this error does not happen on a normal system (i.e. a system which is not totally broken or totally messed up). Do not confuse this error with the case when no queue was detected (e.g. simply becau
en: Failed to determine driver options for queue %1.
target: Bestemmelse af driver-valgmuligheder for k��en %1 fejlede.

note: Define the progress stages: Header of a Progress::New:
en: Initializing Printer Configuration
target: Initialiserer printerkonfiguration

note: 1. progress stage name of a Progress::New:
en: Check installed packages
target: Tjek installerede pakker

note: 1. progress step progress bar title of a Progress::New:
en: Checking installed packages...
target: Tjekker installerede pakker...

note: Last progress step progress bar title of a Progress::New:
en: Finished
target: F��rdig

note: Define the progress stages: Header of a Progress::New:
en: Finishing Printer Configuration
target: F��rdigg��r printerkonfiguration

note: 1. progress stage name of a Progress::New:
en: Finish printer configuration
target: F��rdigg��r printerkonfiguration

note: 1. progress step progress bar title of a Progress::New:
en: Finishing printer configuration...
target: F��rdigg��r printerkonfiguration...

note: Message of a Popup::Error. Only a simple message because this error does not happen on a normal system (i.e. a system which is not totally broken or totally messed up). Do not confuse this error with the case when no queue was detected (e.g. simply because there is no queue). This results no error.
en: Cannot show print queues (failed to detect print queues).
target: Kan ikke vise udskriftsk��er (s��gning efter udskriftsk��er fejlede).

note: When the queue configuration exists on the local host:
en: Local
target: Lokal

note: When the queue configuration exists on a remote machine:
en: Remote
target: Ekstern

note: When the queue is the default queue on the local host:
en: Yes
target: Ja

note: When the queue accepts print jobs and printing is enabled:
en: Ready
target: Klar

note: When printing is disabled for the queue:
en: Printout disabled
target: Udskrift deaktiveret

note: When the queue rejects print jobs and printing is disabled:
en: Rejecting print jobs, printout disabled
target: Afviser udskriftsjobs - udskrift deaktiveret

note: When the queue rejects print jobs:
en: Rejecting print jobs
target: Afviser udskriftsjobs

note: Show a fallback text if there are no local queues:
en: There is no print queue.
target: Der er ingen udskriftsk��.

note: Message of a Popup::Error. Only a simple message because before the function AutodetectPrinters was called and this function would have shown more specific messages.
en: Failed to autodetect printers.
target: Automatisk s��gning efter printere fejlede.

note: Message of a Popup::Error. Only a simple message because before the function CreateDatabase was called and this function would have shown more specific messages.
en: Failed to create the printer driver database.
target: Oprettelse af printer-driver-databasen fejlede.

note: If no driver was already selected, show a meaningful text as fallback entry for a SelectionBox when no connection is selected. It will be replaced by real content, when a connection is selected.
en: Select a connection, then matching drivers show up here.
target: V��lg en tilslutning, s�� vises passende drivere her.

note: Busy message: Body of a Popup::ShowFeedback:
en: Determine available drivers...
target: Bestem tilg��ngelige drivere...

note: If the driver_items list is empty (e.g. because of a too restrictive driver_filter_string), show a meaningful text as fallback entry.
en: No matching driver found. Try 'More Drivers' or 'All Drivers'.
target: Ingen passende driver fundet. Pr��v 'Flere drivere' eller 'Alle drivere'.

note: Busy message: Body of a Popup::ShowFeedback:
en: Processing many drivers. Please wait...
target: Behandler mange drivere. Vent venligst...

note: Message of a Popup::Error. Only a simple message because this is only a fallback case which should not happen at all:
en: Failed to determine the driver options.
target: Bestemmelse af driver-valgmulighederne fejlede.

note: Return at least a list with only a fallback string so that the user is informed: Header of a Popup::AnyMessage when "Driver Options" was selected:
en: No driver options available
target: Ingen tilg��ngelige driver-valgmuligheder

note: Dummy info for a currently selected item:
en: currently selected
target: nuv��rende valgt

note: Info when a currently selected item is already set:
en: current setting of the print queue
target: nuv��rende ops��tning af udskriftsk��en

note: Message of a Popup::Error. Only a simple message because this error does not happen on a normal system.
en: Failed to set up the firewall settings.
    Use the specific YaST Firewall module.
target: Ops��tning af firewall-indstillinger fejlede.
    Brug det specifikke YaST Firewall-modul.

note: Message of a Popup::Error where %1 will be replaced by the package name:
en: Required package %1 is not installed and there is no package repository available.
target: Den kr��vede pakke %1 er ikke installeret, og der er ingen softwarekilde tilg��ngelig.

note: Message of a Popup::Error where %1 will be replaced by the package name:
en: Required package %1 is not installed and not available in the repository.
target: Den kr��vede pakke %1 er ikke installeret, og den er ikke tilg��ngelig p�� softwarekilden.

note: Message of a Popup::Error where %1 will be replaced by the package name. Only a simple message because: Either the user has explicitely rejected to install the package, or this error does not happen on a normal system (i.e. a system which is not totally broken or totally messed up).
en: Failed to install required package %1.
target: Installation af den kr��vede pakke %1 fejlede.

note: Message of a Popup::Error where %1 will be replaced by the package name. Only a simple message because: Either the user has explicitely rejected to remove the package, or this error does not happen on a normal system (i.e. a system which is not totally broken or totally messed up).
en: Failed to remove package %1.
target: Fjernelse af pakken %1 fejlede.

note: Enforce user confirmation before a new service is started to be on the safe side that the user knows about it: PopupYesNoHeadline headline:
en: Start local running CUPS daemon
target: Start lokalt k��rende CUPS-d��mon

note: PopupYesNoHeadline body:
en: A local running CUPS daemon is needed.
target: En lokalt k��rende CUPS-d��mon er n��dvendig.

note: Popup::ErrorDetails message:
en: Failed to start the CUPS daemon
target: Start af CUPS-d��monen fejlede

note: Wait half a minute for a new started cupsd is necessary because when a client-only config is switched to a "get Browsing info" config the BrowseInterval in cupsd.conf on remote CUPS servers is by default 30 seconds so that the local cupsd should listen at least 31 seconds to get Browsing info before
en: Started the CUPS daemon.
    Waiting half a minute so that it is ready to operate...
target: Startede CUPS-d��monen.
    Venter et halvt minut, s�� den er klar til at k��re...

note: It can take up to a few minutes when a cupsd is started for the very first time (e.g. on a new installed system) until the cupsd is actually ready to operate. E.g. because parsing of thousands of PPDs may need much time. Therefore enforce waiting one minute now. (Plain busy message without title.)
en: The CUPS daemon in not yet accessible.
    Waiting one minute so that it is ready to operate...
target: CUPS-d��monen er endnu ikke tilg��ngelig.
    Venter et minut, s�� den er klar til at k��re...

note: Popup::Error message:
en: No local running CUPS daemon is accessible.
target: Ingen lokalt k��rende CUPS-d��mon er tilg��ngelig.

note: Popup::ErrorDetails message:
en: Failed to enable starting of the CUPS daemon during system boot
target: Aktivering af start af CUPS-d��mon under system-boot fejlede

note: Enforce user confirmation before the cupsd is restarted to be on the safe side regarding complaints in an enterprise environment because a restart disrupts all currently actively printing jobs: PopupYesNoHeadline headline:
en: Restart local running CUPS daemon
target: Genstart lokalt k��rende CUPS-d��mon

note: PopupYesNoHeadline body:
en: A restart disrupts all currently actively printing jobs.
target: En genstart afbryder alle nuv��rende aktive udskriftsjobs.

note: Popup::ErrorDetails message:
en: Failed to restart the CUPS daemon
target: Genstart af CUPS-d��monen fejlede

note: Wait half a minute for a restarted cupsd is necessary because when a "no Browsing info" config is switched to a "get Browsing info" config the BrowseInterval in cupsd.conf on remote CUPS servers is by default 30 seconds so that the local cupsd should listen at least 31 seconds to get Browsing info b
en: Restarted the CUPS daemon.
    Waiting half a minute so that it is ready to operate...
target: Genstartede CUPS-d��monen.
    Venter et halvt minut, s�� den er klar til at k��re...

note: PopupYesNoHeadline headline:
en: Enable starting of the CUPS daemon during system boot
target: Aktiv��r start af CUPS-d��monen under system-boot

note: PopupYesNoHeadline body:
en: Currently the CUPS daemon is not started during system boot.
target: CUPS-d��monen startes i ��jeblikket ikke under system-boot.

note: Enforce user confirmation before the cupsd is stopped to be on the safe side regarding complaints in an enterprise environment because a stop disrupts all currently actively printing jobs: PopupYesNoHeadline headline:
en: Stop local running CUPS daemon
target: Stop lokalt k��rende CUPS-d��mon

note: PopupYesNoHeadline body:
en: A stop disrupts all currently actively printing jobs.
target: Et stop afbryder alle nuv��rende aktive udskriftjobs.

note: Popup::Error message:
en: A local running CUPS daemon is still accessible.
target: En lokalt k��rende CUPS-d��mon er stadig tilg��ngelig.

note: When there is a non-empty client_conf_server_name, cups_client_only fails when the client-only server is not accessible: Popup::ErrorDetails message where %1 will be replaced by the server name.
en: The CUPS server '%1' is not accessible
target: CUPS-serveren '%1' er ikke tilg��ngelig

note: Header for a dialog section where the user can specify in which way USB printers are configured automatically:
en: Specify in which way USB printers are configured automatically
target: Angiv p�� hvilken m��de USB-printere konfigureres automatisk

note: CheckBox to have no automatic configuration of USB printers at all by removing the cups-autoconfig RPM package. Do not change or translate "cups-autoconfig", it is a RPM package name.
en: No Automatic Configuration at all: &Remove the cups-autoconfig package.
target: Ingen automatisk konfiguration overhovedet: Fje&rn pakken cups-autoconfig .

note: CheckBox to enable that a print queue is automatically created when a USB printer is connected for the first time to the USB:
en: Enable &Automatic Configuration of New Attachend USB Printers
target: Aktiv��r &automatisk konfiguration af nytilsluttede USB-printere

note: CheckBox to disable the print queue when a USB printer is disconnected from the USB:
en: &Disable Printout when Disconnecting an USB Printer
target: &Deaktiv��r udskrift n��r USB-printer frakobles

note: Header for a ComboBox to specify the CUPS operation policy for print queues which are automatically created when a USB printer is connected for the first time to the USB:
en: Operation &Policy for Automatically Configured USB Printers
target: Handlings&politik for automatisk konfigurerede USB-printere

note: Message of a Popup::ShowFeedback when nothing was changed:
en: Nothing changed.
target: Intet ��ndret.

note: Popup::ErrorDetails message Do not change or translate "ConfigureNewPrinters=yes", it is a system settings name.
en: Failed to set 'ConfigureNewPrinters=yes' in /etc/cups-autoconfig.conf
target: Mislykkedes at s��tte 'ConfigureNewPrinters=yes' i /etc/cups-autoconfig.conf

note: Popup::ErrorDetails message Do not change or translate "ConfigureNewPrinters=no", it is a system settings name.
en: Failed to set 'ConfigureNewPrinters=no' in /etc/cups-autoconfig.conf
target: Mislykkedes at s��tte 'ConfigureNewPrinters=no' i /etc/cups-autoconfig.conf

note: Popup::ErrorDetails message Do not change or translate "DisablePrintersOnRemoval=yes", it is a system settings name.
en: Failed to set 'DisablePrintersOnRemoval=yes' in /etc/cups-autoconfig.conf
target: Mislykkedes at s��tte 'DisablePrintersOnRemoval=yes' i /etc/cups-autoconfig.conf

note: Popup::ErrorDetails message Do not change or translate "DisablePrintersOnRemoval=no", it is a system settings name.
en: Failed to set 'DisablePrintersOnRemoval=no' in /etc/cups-autoconfig.conf
target: Mislykkedes at s��tte 'DisablePrintersOnRemoval=no' i /etc/cups-autoconfig.conf

note: Popup::ErrorDetails message where %1 will be replaced by the cups-autoconfig error policy value. Do not change or translate "DefaultCUPSPolicy", it is a system settings name.
en: Failed to set 'DefaultCUPSPolicy=%1' in /etc/cups-autoconfig.conf
target: Mislykkedes at s��tte 'DefaultCUPSPolicy=%1' i /etc/cups-autoconfig.conf

note: Popup::Error message:
en: Failed to apply the settings to the system.
target: Anvendelse af indstillingen p�� systemet fejlede.

note: Caption for the "Add Printer" dialog (BasicAddDialog):
en: Add New Printer Configuration
target: Tilf��j ny printerkonfiguration

note: Caption for a Table with a list of printer connections:
en: Determine Connection
target: Bestem tilslutning

note: Header of a Table column with a list of printer connections. Connection of the printer (e.g. via USB or via parallel port): Caption for a Table with a list of printer connections:
en: Connection
target: Tilslutning

note: Header of a Table column with a list of printer connections. Additional description of the printer or its particular connection: Header of a Table column with a list of print queues. Print queue description (e.g. model or driver):
en: Description
target: Beskrivelse

note: Label of a PushButton to show more available printer connections in the Table with a list of printer connections:
en: &More Connections
target: F&lere tilslutninger

note: Label of a PushButton to go to the "Connection Wizard" to specify the printer connection individually:
en: Connection &Wizard
target: Tilslutnings&guide

note: Caption for a printer driver selection:
en: Assign &Driver
target: Tildel &driver

note: Label of a PushButton to search a list for a search string and then show the search result:
en: &Show Matching Drivers
target: &Vis passende drivere

note: Body of a Popup::AnyMessage when no driver was selected:
en: Select a driver.
target: V��lg en driver.

note: Label of a PushButton to go to the "Add Driver" dialog to install a new driver (and perhaps download it before):
en: &Add Driver
target: &Tilf��j driver

note: Header of a TextEntry to enter the queue name:
en: Set &Name
target: Angiv &navn

note: Set a different label for the "next" button (i.e. the lower right button which results `next as UI::UserInput). This button finishes the "add" procedure:
en: &Finish Add
target: &F��rdigg��r tilf��jelse

note: Header of a Popup::AnyMessage when neither a connection nor a driver was selected: Header of a Popup::AnyMessage when no queue was selected from the list:
en: Nothing Selected
target: Intet valgt

note: Body of a Popup::AnyMessage when neither a connection nor a driver was selected:
en: Select a connection and then assign a driver.
target: V��lg en tilslutning, og tildel s�� en driver.

note: Header of a Popup::AnyMessage when no connection was selected:
en: No Connection Selected
target: Ingen tilslutning valgt

note: Body of a Popup::AnyMessage when no connection was selected:
en: Select a connection.
target: V��lg en tilslutning.

note: Header of a Popup::AnyMessage when no driver was selected:
en: No Driver Selected
target: Ingen driver valgt

note: Header of a Popup::AnyMessage when no queue name was entered:
en: No Queue Name
target: Intet navn p�� k��

note: Body of a Popup::AnyMessage when no queue name was entered:
en: Enter a queue name.
target: Angiv et navn p�� k��en.

note: Header of a Popup::AnyMessage when a wrong queue name was entered:
en: Invalid Queue Name
target: Ugyldigt navn p�� k��

note: Body of a Popup::AnyMessage when a wrong queue name was entered:
en: Only letters [A-Za-z], numbers [0-9], and '_' are allowed for the queue name.
target: Kun bogstaver [A-Z a-z], tal [0-9] og '_' tillades i navnet p�� k��en.

note: Header of a Popup::ContinueCancelHeadline when a queue name is changed to be valid:
en: Confirm Validated Queue Name
target: Bekr��ft valideret navn p�� k��

note: Body of a Popup::ContinueCancelHeadline when a queue name was automatically changed to be valid where %1 will be replaced by the old invalid queue name and %2 will be replaced by a new valid queue name
en: '%1' is invalid or it exists already. Use '%2' instead?
target: '%1' er ugyldigt eller eksisterer allerede. Vil du bruge '%2' i stedet?

note: Message of a Popup::Error where %1 will be replaced by the queue name. Only a simple message because before the function Printer::AddQueue was called and this function would have shown more specific messages.
en: Failed to add queue %1.
target: Tilf��jelse af k��en %1 fejlede.

en: any model
target: enhver model

note: Title of the Basic Modify Dialog where %1 will be replaced by the queue name. The actual queue name is a system value which cannot be translated:
en: Modify %1
target: ��ndr %1

note: Label of a PushButton to go to a dialog to set all available options for the printer driver which is currently used for a print queue:
en: All &Options for the Current Driver
target: Alle valgmuligheder f&or denne driver

en: Default Paper Size of the Current Driver
target: Standardpapirst��rrelse for denne driver

en: Current Connection
target: Nuv��rende tilslutning

note: Do not change or translate "raw", it is a technical term when no driver is used. Do not change or translate "System V style interface script", it is a technical term.
en: No driver is used (it is a 'raw' queue or a 'System V style interface script' is used)
target: Ingen driver anvendes (det er en 'r��' k��, eller 'System V style interface script' benyttes)

en: Current Driver
target: Nuv��rende driver

note: Label of a TextEntry for a short printer driver description (only one line):
en: Descri&ption
target: &Beskrivelse

note: Label of a TextEntry for printer location string:
en: &Location
target: P&lacering

note: CheckBox to set a local print queue to be the default queue:
en: &Default Printer
target: Stan&dardprinter

note: CheckBox to set a local print queue to accept print jobs:
en: Accept Print &Jobs
target: Accept��r udskrifts&jobs

note: CheckBox to enable printing for a local print queue:
en: &Enable Printing
target: &Aktiv��r udskrift

note: Set a different label for the "next" button (i.e. the lower right button which results `next as UI::UserInput). This button finishes the "add" procedure:
en: &Finish Modify
target: &F��rdigg��r ��ndring

note: Message of a Popup::Error where %1 will be replaced by the queue name. Only a simple message because this error does not happen on a normal system (i.e. a system which is not totally broken or totally messed up).
en: Failed to modify %1.
target: ��ndring af %1 fejlede.

note: Body of a Popup::AnyMessage when "Driver Options" was selected:
en: Possible reasons: Nothing selected or it is a remote configuration.
target: Mulige ��rsager: Intet valgt, eller det er en ekstern konfiguration.

note: TRANSLATORS: Button to test remote printer machine
en: &Test Connection
target: &Test tilslutning

note: TRANSLATORS: Button to add not detected printer queue
en: Other
target: Andre

note: TRANSLATORS: Text entry to fill IP or hostname of remote server TRANSLATORS: Text entry for IP or hostname of remote server
en: IP Address or Host Name
target: IP-adresse eller v��rtsnavn

note: TRANSLATORS: Label for menu to search for remote servers
en: Look Up
target: S��g efter

note: TRANSLATORS: Buttonto search for remote servers
en: Look Up for All Hosts
target: S��g efter alle v��rtsmaskiner

note: TRANSLATORS: List of input field labels, first for network scan button
en: Scan for Direct Socket Servers
target: S��g efter Direct Socket-servere

en: TCP Port Number
target: TCP-portnummer

note: TRANSLATORS: List of input field labels, first for network scan button, second for name of printer queue
en: Scan for LPD Servers
target: S��g efter LPD-servere

en: Queue Name (see the printer's manual)
target: Navn p�� k�� (se printerens manual)

note: TRANSLATORS: Input field label
en: URI (see the printer's manual)
target: URI (se printerens manual)

note: TRANSLATORS: Text entry for remote server name
en: Server (NetBIOS Host Name)
target: Server (NetBIOS-v��rtsnavn)

note: TRANSLATORS: Text entry for printer name
en: Printer (Share Name)
target: Printer (navn p�� deling)

note: TRANSLATORS: Text entry for samba domain
en: Workgroup (Domain Name)
target: Arbejdsgruppe (dom��nenavn)

note: TRANSLATORS: Frame label for authentication
en: Authenticate As
target: Godkend som

note: TRANSLATORS: Text entry for username (authentication)
en: User
target: Bruger

note: TRANSLATORS: Text entry for password (authentication)
en: &Password
target: &Adgangskode

note: TRANSLATORS: Text entry for name of remote printer queue
en: Queue Name
target: Navn p�� k��

en: Scan for IPP Servers
target: S��g efter IPP-servere

en: Scan for IPP Broadcasts
target: S��g efter IPP-broadcasts

note: TRANSLATORS: Text entry for program name that will be called via pipe
en: Program Name
target: Programnavn

note: TRANSLATORS: Text entry for device URI (Uniform Resource Identifier)
en: Device URI (for which 'beh' should be applied)
target: Enheds-URI (for hvilket 'beh' b��r anvendes)

note: TRANSLATORS: Check box
en: Never Disable the Queue
target: Deaktiv��r aldrig k��en

note: TRANSLATORS: Text entry
en: Number of Retries ('0' means infinite retries)
target: Antal genfors��g ('0' betyder uendelige genfors��g)

note: TRANSLATORS: Text entry
en: Delay in Seconds Between Two Retries
target: Forsinkelse i sekunder mellem to genfors��g

note: TRANSLATORS: Label for tree widget description
en: &Connection Type
target: &Tilslutningstype

note: TRANSLATORS: Tree widget item
en: Directly Connected Device
target: Direkte tilsluttet enhed

note: TRANSLATORS: Tree widget item
en: Parallel Port
target: Parallelport

note: TRANSLATORS: Tree widget item
en: USB Port
target: USB-port

note: TRANSLATORS: Tree widget item
en: Serial Port
target: Serielport

note: TRANSLATORS: Tree widget item
en: HP Devices (HPLIP)
target: HP-enheder (HPLIP)

note: TRANSLATORS: Tree widget item
en: Access Network Printer or Printserver Box via
target: Tilg�� netv��rksprinter eller udskriftsserverboks via

note: TRANSLATORS: Tree widget item
en: TCP Port (AppSocket/JetDirect)
target: TCP-port (AppSocket/JetDirect)

note: TRANSLATORS: Tree widget item
en: Line Printer Daemon (LPD) Protocol
target: Linjeprinterd��mon- (LPD-) protokol

note: TRANSLATORS: Tree widget item
en: Internet Printing Protocol (IPP)
target: Internetudskriftsprotokol (IPP)

note: TRANSLATORS: Tree widget item
en: Print Via Print Server Machine
target: Udskrift via udskriftservermaskine

note: TRANSLATORS: Tree widget item
en: Traditional UNIX Server (LPR)
target: Traditionel UNIX-server (LPR)

note: `item(`id(`iprint), _("iPrint (Novell OES)")), TRANSLATORS: Tree widget item
en: CUPS Server
target: CUPS-server

note: TRANSLATORS: Tree widget item
en: Special
target: Speciel

note: TRANSLATORS: Tree widget item
en: Specify Arbitrary Device URI
target: Angiv tilf��ldig enheds-URI

note: TRANSLATORS: Tree widget item
en: Send Print Data to Other Program (pipe)
target: Send udskriftsdata til andet program (pipe)

note: TRANSLATORS: Tree widget item
en: Daisy-chain Backend Error Handler (beh)
target: Fejlh��ndtering for Daisy-chain-backend (beh)

note: TRANSLATORS: Connection details widget
en: Connection Settings
target: Tilslutningsindstillinger

note: TRANSLATORS: Connection wizard header
en: Connection Wizard
target: Tilslutningsguide

en: Printer Configurations
target: Printer-konfigurationer

en: Print via Network
target: Udskrift via netv��rk

en: Share Printers
target: Del printere

en: Policies
target: Politikker

en: Autoconfig Settings
target: Ops��tning af automatisk konfiguration

en: Detected Printers
target: Fundne printere

note: Title of the Add Driver Dialog:
en: Add Driver
target: Tilf��j driver

note: Header for a dialog section where the user can add or remove printer driver packages:
en: Install or Remove Printer Driver Packages
target: Install��r eller fjern printerdriver-pakker

note: CheckBox to select or un-select the printer driver package cups-drivers. There is no need to have the package name "cups-drivers" in this text because it is shown in a separated column to the left of this text.
en: Various Standard Drivers
target: Forskellige standarddrivere

note: CheckBox to select or un-select the printer driver package gutenprint. There is no need to have the package name "gutenprint" in this text because it is shown in a separated column to the left of this text. Do not change or translate "Gutenprint", it is a open source project name. Do not change or t
en: Gutenprint/Gimp-Print Driver
target: Gutenprint/Gimp-Print-driver

note: CheckBox to select or un-select the printer driver packages hplip and hplip-hpijs. There is no need to have the package names "hplip" and "hplip-hpijs" in this text because they are shown in a separated column to the left of this text.
en: Driver for HP Printers and All-in-One Devices
target: Drivere til HP-printere og All-in-One-enheder

note: CheckBox to select or un-select the printer driver package manufacturer-PPDs. There is no need to have the package name "manufacturer-PPDs" in this text because it is shown in a separated column to the left of this text.
en: Printer Description Files for PostScript Printers
target: Printerbeskrivelsesfiler til PostScript-printere

note: CheckBox to select or un-select the printer driver package ghostscript-omni. There is no need to have the package name "ghostscript-omni" in this text because it is shown in a separated column to the left of this text.
en: The Omni Printer Driver (Unmaintained)
target: Omni-printerdriver (ikke vedligeholdt)

note: CheckBox to select or un-select the printer driver package filters which provides some makeshift drivers only for a few of the non-standard printers (the so called "GDI printers"). There is no need to have the package name "filters" in this text because it is shown in a separated column to the left 
en: Makeshift Drivers for a Few Non-Standard (GDI) Printers
target: Makeshift-drivere til nogle f�� ikke-standard- (GDI) printere

note: Header for a dialog section where the user can make a printer description file (PPD file) available so that it can be used to set up a print queue with it:
en: Make a Printer Description File Available
target: G��r en printerbeskrivelsesfil tilg��ngelig

note: TextEntry to specify the full path of a PPD file:
en: &Printer description file name with full path where it is located
target: &Printerbeskrivelsesfilens navn med fuld s��gesti til hvor den er placeret

note: Label of a PushButton to open a file selection box to browse the file system to select a PPD file:
en: &Browse
target: &Gennemse

note: Popup::ErrorDetails message where %1 will be replaced by the file name:
en: Cannot access '%1'
target: Kan ikke tilg�� '%1'

note: Popup::ErrorDetails message:
en: The printer description file is not in compliance to the specification.
target: Printerbeskrivelsesfilen er ikke overensstemmelse med specifikationen.

note: Header of a Popup::ContinueCancelHeadline when a PPD file is not in compliance:
en: Use the printer description file regardless of its errors?
target: Vil du bruge printerbeskrivelsesfilen uanset dens fejl?

note: Body of a Popup::ContinueCancelHeadline when PPD file is not in compliance:
en: A non-compliant printer description file can lead to arbitrary failures.
target: En ikke-overensstemmende printerbeskrivelsesfil kan f��re til tilf��ldige fejl.

note: Popup::ErrorDetails message:
en: Failed make the printer description file available
target: Mislykkedes at g��re printerbeskrivelsesfilen tilg��ngelig

note: Title of the Driver Options Dialog where %1 will be replaced by the queue name. The actual queue name is a system value which cannot be translated:
en: Driver Options for Queue %1
target: Driver-valgmuligheder for k��en %1

note: Message of a Popup::Error where %1 will be replaced by the queue name. Only a simple message because this error does not happen on a normal system (i.e. a system which is not totally broken or totally messed up).
en: Failed to set driver options for queue %1.
target: Ops��tning af driver-valgmuligheder for k��en %1 fejlede.

note: Read dialog help 1/1:
en: <p>
    <b><big>Initializing printer Configuration</big></b><br>
    Please wait...<br>
    </p>
target: <p>
    <b><big>Initialiserer konfiguration af printer</big></b><br>
    Vent venligst...<br>
    </p>

note: Write dialog help 1/1:
en: <p>
    <b><big>Finishing printer Configuration</big></b><br>
    Please wait...<br>
    </p>
target: <p>
    <b><big>F��rdigg��r konfiguration af printer</big></b><br>
    Vent venligst...<br>
    </p>

note: Overview dialog help 1/7:
en: <p>
    <b><big>Print Queue Overview</big></b><br>
    A printer device is not used directly but via a print queue.<br>
    When various application programs submit print jobs simultaneously,
    these jobs are put in a queue and are sent one after the other to the printer
    device.<br>
    It is possible to have several different print queues for the same printer
    device.
    For example a second queue with a monochrome-only driver for a color device
    or a PostScript queue and a queue with a PCL driver for a PostScript+PCL
    printer or a queue to print on one side only of a sheet of paper and one for two sided
    printing.
    </p>
target: <p>
    <b><big>Oversigt over udskriftsk��er</big></b><br>
    En udskriftsenhed bruges ikke direkte, men via en udskriftsk��.<br>
    N��r forskellige programmer tildeler udskriftsjobs samtidigt,
    s��ttes disse i en k�� og sendes en ad gangen til udskriftsenheden.<br>
    Det er muligt, at have flere forskellige udskriftsk��er til samme udskriftsenhed.
    For eksempel en anden k�� med kun-monokrom driver til en farveenhed eller en
    PostScript-k�� og en k�� med en PCL-driver til en PostScript+PCL-printer,
    eller en k�� til udskrivning p�� kun en side af papiret og en til tosidet udskrift.
    </p>

note: Overview dialog help 2/7:
en: <p>
    <b><big>Using Remote Queues:</big></b><br>
    Remote queues exist on other hosts in the network
    and therefore they cannot be changed on this host.<br>
    The remote queues which are listed here are known on this host
    and usually they can be used directly by application programs
    so that there is no need to set up a local queue for a printer
    which is already available via a remote queue.<br>
    </p>
target: <p>
    <b><big>Anvendelse af eksterne k��er:</big></b><br>
    Eksterne k��er findes p�� andre v��rter p�� netv��rket,
    og derfor kan de ikke ��ndres p�� denne v��rt.<br>
    De eksterne k��er, der vises her, kendes p�� denne v��rt,
    og kan normalt bruges direkte af de anvendte programmer,
    s�� det er ikke n��dvendigt at s��tte en lokal k�� op for en
    printer, der allerede er tilg��ngelig via en ekstern k��.<br>
    </p>

note: Overview dialog help 3/7:
en: <p>
    <b><big>Configure a printer:</big></b><br>
    Press <b>Add</b> to set up a new queue for a printer device.
    </p>
target: <p>
    <b><big>Konfigur��r en printer:</big></b><br>
    Tryk p�� <b>Tilf��j</b> for at s��tte en ny k�� op for en udskriftsenhed.
    </p>

note: Overview dialog help 4/7:
en: <p>
    <b><big>Change the settings for a queue:</big></b><br>
    Select a local queue and press <b>Configure</b>.
    </p>
target: <p>
    <b><big>��ndre indstillinger for en k��:</big></b><br>
    V��lg en lokal k�� og tryk p�� <b>Konfigur��r</b>.
    </p>

note: Overview dialog help 5/7:
en: <p>
    <b><big>Remove a queue:</big></b><br>
    Select a local queue and press <b>Delete</b>.
    </p>
target: <p>
    <b><big>Fjerne en k��:</big></b><br>
    V��lg en lokal k�� og tryk p�� <b>Slet</b>.
    </p>

note: Overview dialog help 6/7:
en: <p>
    <b><big>Print a test page:</big></b><br>
    Select the queue and press <b>Print Test Page</b>.
    </p>
target: <p>
    <b><big>Udskrive en testside:</big></b><br>
    V��lg k��en og tryk p�� <b>Udskriv testside</b>.
    </p>

note: Overview dialog help 7/7:
en: <p>
    <b><big>Refresh the list of queues:</big></b><br>
    In particular after changes regarding printing via network
    the available remote queues may have changed.
    Usually it takes some time (up to several minutes)
    until such changes become known to the local host
    so that it is useful to press <b>Refresh List</b>
    after some time to get an up-to-date list
    of available remote queues.
    </p>
target: <p>
    <b><big>Genopfriske listen over k��er:</big></b><br>
    S��rligt efter ��ndringer vedr. udskrift over netv��rk
    kan de tilg��ngelige eksterne k��er v��re ��ndrede.
    Normalt tager det noget tid (op til flere minutter),
    f��r s��danne ��ndringer kendes af den lokale v��rt.
    Det er s��ledes nyttigt at trykke p�� <b>Genopfrisk liste</b>
    efter et stykke tid for at f�� en ajourf��rt liste over
    tilg��ngelige eksterne k��er.
    </p>

note: BasicAddDialog help 1/5:
en: <p>
    <b><big>Set Up a New Queue for a Printer Device</big></b><br>
    A printer device is not used directly but via a print queue.<br>
    When various application programs submit print jobs simultaneously,
    the jobs queue up and are sent one after the other to the printer device.<br>
    It is possible to have several different print queues for the same printer device.
    Usually several print queues are needed when several different printer drivers
    should be used for the same printer device.
    For example a second queue with a monochrome-only driver
    to enforce black-only printout on a color device
    or a PostScript queue and a queue with a PCL driver for a PostScript+PCL printer
    because printing via the PCL driver is usally faster (but with less quality).
    </p>
target: <p>
    <b><big>S��t en ny k�� op til en printer-enhed</big></b><br>
    En printer bruges ikke direkte, men via en udskriftsk��.<br>
    N��r flere programmer tildeler udskriftsjobs samtidigt, s��ttes
    disse i k�� og sendes en ad gangen til printeren.<br>
    Det er muligt, at have flere forskellige udskriftsk��er til den samme printer.
    Flere udskriftsk��er er normalt n��dvendige, n��r der skal benyttes flere
    printer-drivere til den samme printer-enhed.
    Det kan f.eks. v��re en udelukkende monokrom driver for at gennemtvinge
    sort/hvide udskrifter p�� en farveprinter, eller en PostScript-k�� og en
    PCL-driver til en PostScript+PCL-printer, da udskrift via PCL-
    driveren normalt er hurtigere (men med d��rligere kvalitet).
    </p>

note: BasicAddDialog help 2/5:
en: <p>
    To set up a new queue:<br>
    Select the connection of the matching printer device,<br>
    find and assign a suitable printer driver, and<br>
    set a unique queue name.
    </p>
target: <p>
    At s��tte en ny k�� op:<br>
    V��lg den tilslutning som matcher printer-enheden,<br>
    find og tildel en passende printer-driver, og<br>
    angiv et unikt navn p�� k��en.
    </p>

note: BasicAddDialog help 3/5: BasicModifyDialog help 2/4:
en: <p>
    The <b>connection</b> determines which way data is sent to the printer device.<br>
    If a wrong connection is selected, no data can be sent to the device
    so that there cannot be any printout.<br>
    If a printer device is accessible via more than one connection type,
    it is shown for each connection type.<br>
    In particular HP devices are often accessible both via the 'usb:/...'
    and the 'hp:/...' connection.
    The latter is provided by the HP driver package 'hplip'.
    For plain printing both kind of connections should work but for anything else
    (e.g. device status via 'hp-toolbox', or scanning with a HP all-in-one device)
    the 'hp:/...' connection must be used.
    </p>
target: <p>
    <b>Tilslutningen</b> bestemmer, hvilken vej data sendes til printer-enheden.<br>
    Hvis en forkert tilslutning v��lges, kan ingen data sendes til enheden,
    og der kan s��ledes ikke udskrives.<br>
    Hvis en printer-enhed kan tilg��s via mere end ��n tilslutningstype,
    vises den for hver tilslutningstype.<br>
    S��rligt HP-enheder kan ofte tilg��s via b��de 'usb:/...'- og 'hp:/...'-
    tilslutningen.
    Den sidstn��vnte tilbydes af HP driver-pakken 'hplip'.
    Begge slags tilslutninger skulle virke til almindelig udskrift, men til alt
    muligt andet (f.eks. enhedsstatus via 'hp-toolbox', eller scanning med en HP
    all-in-one-enhed skal 'hp:/...'-tilslutningen benyttes.
    </p>

note: BasicAddDialog help 4/5:
en: <p>
    The <b>driver</b> determines that the right data is produced for the
    specific printer model.<br>
    If a wrong driver is assigned, wrong data is sent to the printer
    which results bad looking printout, chaotic printout, or no printout at all.
    </p>
target: <p>
    <b>Driveren</b> bestemmer, at den rigtige data produceres til den
    angivne printer-model.<br>
    Hvis en forkert driver tildeles, sendes forkert data til printeren, hvilket
    resulterer i d��rligt udseende, kaotisk eller slet intet udskrift.
    </p>

note: BasicAddDialog help 5/5:
en: <p>
    Application programs do not show the actual printer device
    but its associated <b>queue name</b>.<br>
    Only letters [A-Za-z], numbers [0-9], and the underscore '_'
    are allowed for the queue name and it must start with a letter.
    </p>
target: <p>
    Applikationsprogrammer viser ikke den faktiske printer-enhed
    men dens associerede <b>navn p�� k��en</b>.<br>
    Kun bogstaver [A-Z a-z], tal [0-9] og bundstreg '_'
    er tilladt i navne p�� k��er, og det skal starte med et bogstav.
    </p>

note: BasicModifyDialog help 1/4:
en: <p>
    <b><big>Modify a Print Queue</big></b><br>
    To modify a queue, select only what you really want to be changed.<br>
    </p>
target: <p>
    <b><big>��ndre en udskriftsk��</big></b><br>
    V��lg kun det, du virkelig vil have ��ndret, for at ��ndre en k��.<br>
    </p>

note: BasicModifyDialog help 3/4:
en: <p>
    The <b>driver</b> determines that the right data is produced for the
    specific printer model.<br>
    If a wrong driver is assigned, wrong data is sent to the printer
    which results bad looking printout, chaotic printout, or no printout at all.<br>
    You can either select another driver and modify its driver option settings later
    or keep the currently used driver and modify its driver option settings now.<br>
    Some driver option settings must match to your particular printer.
    For example the default paper size setting of the driver
    must match to the paper which is actually loaded in your printer.<br>
    For other driver option settings you can choose what you like.
    For example any choice of the available printing resolutions
    should work for the particular driver.
    Nevertheless it may happen that your particular printer fails to print
    with high resolution. For example when you have a laser printer
    which has insufficient built-in memory to process high resolution pages.
    </p>
target: <p>
    <b>Driveren</b> s��rger for, at de rette data produceres til den
    angivne printer-model.<br>
    Hvis en forkert driver tildeles, sendes forkerte data til printeren, hvilket
    resulterer i d��rligt udseende, kaotisk eller slet intet udskrift.<br>
    Du kan enten v��lge en anden driver, og senere ��ndre ops��tningen af
    driver-valgmulighederne, eller beholde den nuv��rende driver og ��ndre
    dens ops��tning af driver-valgmulighederne nu.<br>
    Nogle indstillinger i driver-valgmulighederne skal passe til den enkelte printer.
    Ops��tning af driverens standard-papirst��rrelse skal f.eks. matche det papir,
    der faktisk er lagt i printeren.<br>
    Til andre indstillinger af driver-valgmuligheder kan du v��lge, hvad du har
    lyst til. For eksempel skulle ethvert valg af udskriftsopl��ninger fungere
    for den enkelte .
    Dog kan det h��nde, at din egen printer fejler i udskrift med h��j opl��sning,
    hvis du f.eks. har en laser-printer, der ikke har den forn��dne indbyggede
    hukommelse til at bearbejde sider med h��j opl��sning.
    </p>

note: BasicModifyDialog help 4/4:
en: <p>
    In contrast to connection and driver where you must select the right one,
    you are free to enter arbitrary strings for <b>description</b> and <b>location</b>.
    Application programs often show description and location in the print dialog.
    To make sure that those strings look correct in any language
    which a particular user of a particular application program may use,
    it is safe when you use only plain text without special characters
    (e.g. only letters [A-Za-z], numbers [0-9], and spaces).
    Usually the description describes the model and optionally the driver
    (e.g. 'ACME FunPrinter 1000 using generic PCL driver')
    and the location describes where the printer is located
    (e.g. 'Room 123' or 'Front Desk').
    </p>
target: <p>
    Modsat tilslutning og driver, hvor du skal v��lge den rigtige, kan du frit
    angive vilk��rlige strenge for <b>beskrivelse</b> og <b>placering</b>.
    Applikationsprogrammerne viser ofte beskrivelse og placering i
    udskriftdialogen.
    Det er bedst kun at benytte ren tekst og uden specielle tegn (f.eks kun
    bogstaver [A-Z a-z] og tal [0-9] og mellemrum) for at sikre, at disse
    strenge ser rigtige ud p�� ethvert sprog, som en applikationsbruger
    m��te anvende.
    Normalt beskriver beskrivelsen modellen og evt. driveren (som f.eks.
    'ACME FunPrinter 1000 med generic PCL-driver'), ligesom placering
    beskriver, hvor printeren er placeret (f.eks. 'Rum 123' eller 'Reception').
    </p>

note: DriverOptionsDialog help 1/3:
en: <p>
    <b><big>Set Driver Options</big></b><br>
    Usually it is best to leave the driver defaults because
    the defaults should be reasonable for usual printing.<br>
    Additionally the print dialogs in usual application programs
    show the driver options too so that each user can specify
    driver options for each individual printout.<br>
    The only setting which should be checked in any case is the paper size
    which must be set to what is actually used by default in the printer.
    </p>
target: <p>
    <b><big>Indstil valgmuligheder for driver</big></b><br>
    Normalt er det bedst blot at benytte standardindstillingerne for
    driveren, da disse burde v��re udm��rkede til alm. udskrift.<br>
    Ydermere viser udskriftdialogen i almindelige applikations-
    programmer valgmulighederne for driveren, s�� hver bruger kan
     angive disse for hvert enkelt udskrift.<br>
    Den eneste indstilling, der skal tjekkes i hvert enkelt tilf��lde, er
    papirst��rrelsen, der skal s��ttes til den, der faktisk benyttes som
    standard i printeren.
    </p>

note: DriverOptionsDialog help 2/3:
en: <p>
    Non-default settings may not work in any case or have unexpected consequences.<br>
    For example a high resolution setting may not work for a laser printer
    when its default built-in memory is insufficient to process high resolution pages.<br>
    Or a high quality setting may print intolerable slow on an inkjet printer.
    </p>
target: <p>
    Ikke-standardindstillinger virker m��ske slet ikke eller har uventede konsekvenser.<br>
    For eksempel virker en for h��jt sat opl��sning m��ske ikke for en laser-printer, hvis den
    standard indbyggede hukommelse er utilstr��kkelig til at behandle sider med h��j opl��sning.<br>
    Eller en h��jkvalitets indstilling g��r udskrift ut��leligt langsom p�� en inkjet-printer
    </p>

note: DriverOptionsDialog help 3/3:
en: <p>
    On the other hand in certain cases printer-specific driver settings
    must be adjusted to get the full functionality of a printer.<br>
    In particular when the printer has optional units installed like
    duplex unit or optional paper feeders, the matching driver settings
    should be checked and adjusted.<br>
    For example a duplex unit option must be set to 'installed' or 'true'
    otherwise the driver may ignore duplex printing option settings.
    </p>
target: <p>
    P�� den anden side set skal specifikke driver-indstillinger justeres
    for at opn�� den fulde funktionalitet af en printer.<br>
    Specielt, hvis printeren har valgfrie elementer installeret som
    'duplex unit' eller valgfrie papirf��dere, skal de passende driver-
    indstillinger markeres og justeres.<br>
    For eksempel skal duplex-elementet s��ttes til 'installed' eller 'true',
    ellers kan printeren evt. ignorere ops��tningen af duplex-udskrift.
    </p>

note: AddDriverDialog help 1/2:
en: <p>
    <b><big>Add or Remove Printer Driver Packages</big></b><br>
    When a printer driver package is not marked, it is not installed
    and then you can select it so that it will be installed.<br>
    When a printer driver package is marked, it is installed
    and then you can un-select it so that it will be removed.
    In the latter case it is up to you to make sure
    that there is no printer configuration which needs the driver.<br>
    </p>
target: <p>
    <b><big>Tilf��j eller fjern printerdriver-pakker</big></b><br>
    N��r en printerdriver-pakke ikke er markeret, er den ikke
    installeret, og du kan s�� v��lge den til installation.<br>
    N��r en printerdriver-pakke er markeret, er den installeret,
    og du kan s�� frav��lge den, s�� den bliver fjernet.
    I det sidste tilf��lde er det op til dig at tilsikre, at der ikke
    er en printerkonfiguration, som beh��ver driveren.<br>
    </p>

note: AddDriverDialog help 2/2:
en: <p>
    <b><big>Add a Printer Description File</big></b><br>
    To set up a printer configuration a printer description file
    (PPD file) is required.<br>
    When a PPD file is not located in the /usr/share/cups/model/ directory,
    it is not available to set up a printer configuration with it.
    Therefore you can specify the full path of a PPD file
    which is located elsewhere on your system to get it installed
    in the /usr/share/cups/model/ directory.<br>
    Note that a printer description file is not a driver.<br>
    For non-PostScript printers the PPD file alone is
    not sufficient to set up a working printer configuration.
    In particular it does not work for non-PostScript printers
    to download a PPD file from the Internet and then set up
    the printer with such a PPD file.
    The plain printer setup would work but actual printing
    would not work because the driver is missing.
    For non-PostScript printers you need a printer driver
    and a PPD file which matches exactly to the particular driver.
    Matching PPD files are automatically installed at the right place
    when you install the above mentioned printer driver packages.<br>
    Only for PostScript printers, a PPD file alone is usually
    sufficient to set up a working PostScript printer configuration.
    In particular it is sufficient when the PPD file does not
    contain a 'cupsFilter' entry because such an entry would
    reference a printer driver.<br>
    </p>
target: <p>
    <b><big>Tilf��j en printerbeskrivelsesfil</big></b><br>
    En printerbeskrivelsesfil (PPD-fil) kr��ves for at s��tte en
    printerkonfiguration op.<br>
    N��r en PPD-fil ikke findes i mappen /usr/share/cups/model/, er
    den ikke tilg��ngelig til ops��tning af en printerkonfiguration.
    Du kan derfor angive den fulde s��gesti til en PPD-fil, der findes
    andetsteds p�� dit system, for at f�� den installeret i mappen
    /usr/share/cups/model/.<br>
    Bem��rk at en printerbeskrivelsesfil ikke er en driver.<br>
    Til ikke-PostScript-printere er PPD-filen alene ikke nok til
    ops��tning af en fungerende printerkonfiguration.
    Specielt virker det ikke for ikke-PostScript-printere at
    downloade en PPD-fil fra internettet, for derefter at s��tte
    printeren op med en s��dan PPD-fil.
    Den enkle ops��tning af printeren vil fungere, men den faktiske
    udskrivning virker ikke, da driveren mangler.
    Til ikke-PostScript-printere skal du bruge en printerdriver og
    en PPD-fil, der matcher fuldst��ndigt til den enkelte driver.
    Matchende PPD-filer installeres automatisk p�� den rette plads,
    n��r du installerer printerdriver-pakkerne n��vnt ovenfor.<br>
    Kun til PostScript-printere er en PPD-fil alene normalt nok til
    at s��tte en fungerende PostScript-printerkonfiguration op.
    Specielt er det nok, hvis PPD-filen ikke indeholder en
    'cupsFilter'-indgang, da en s��dan ville henvise til en
    printerdriver.<br>
    </p>

note: ConnectionWizardDialog help 1/6:
en: <p>
    <b><big>Specify the Connection</big></b><br>
    The <b>connection</b> determines which way data is sent to the printer device.<br>
    If a wrong connection is used, no data can be sent to the device
    so that there cannot be any printout.
    </p>
target: <p>
    <b><big>Angiv tilslutningen</big></b><br>
    <b>Tilslutningen</b> bestemmer, hvilken vej data sendes til printer-enheden.<br>
    Hvis en forkert tilslutning anvendes, kan ingen data sendes til enheden,
    s��ledes bliver der heller ikke nogen udskrift.
    </p>

note: ConnectionWizardDialog help 2/6:
en: <p>
    <b><big>Printer Device URI</big></b><br>
    A connection is specified as so called <b>device URI</b>.<br>
    Its first word (the so called URI scheme) specifies the kind of data-transfer,
    for example 'parallel', 'usb', 'socket', 'lpd', or 'ipp'.<br>
    After the scheme there are more or less additional parts
    (separated by slash '/' characters) which specify the details
    for this kind of data-transfer.<br>
    Finally there could be optional parameters (separated by a question mark '?')
    of the form option1=value1&option2=value2&option3=value3 so that
    a full device URI could be for example:<br>
    ipp://server.domain:631/printers/queuename?waitjob=false&waitprinter=false<br>
    Special characters must be percent-encoded (also known as URL encoding).
    For example a space character ' ' must be written as '%20'
    and a plus sign '+' must be written as '%2B'.<br>
    Some examples:<br>
    A USB printer model 'Fun Printer 1000+' made by 'ACME'
    with serial number 'A1B2C3' may have a device URI like:<br>
    usb://ACME/Fun%20Printer%201000%2B?serial=A1B2C3<br>
    A network printer with IP 192.168.100.1 which is accessible
    via port 9100 may have a device URI like:<br>
    socket://192.168.101.202:9100<br>
    A network printer with IP 192.168.100.2 which is accessible
    via LPD protocol with a remote LPD queue name 'lpt1'
    may have a device URI like:<br>
    lpd://192.168.100.2/lpt1
    </p>
target: <p>
    <b><big>Printer-enhedens URI</big></b><br>
    En tilslutning angives som et s��kaldt <b>enheds-URI</b>.<br>
    Dets f��rste ord (det s��kaldte URI-skema) angiver typen af dataoverf��rsel,
    for eksempel 'parallel', 'usb', 'socket', 'lpd' eller 'ipp'.<br>
    Efter skemaet er der flere eller f��rre yderligere dele (adskilt med
    skr��streger '/'), som angiver detaljerne for denne type dataoverf��rsel.<br>
    Til sidst kan der v��re valgfrie parametre (adskilt med et sp��rgsm��lstegn '?')
    i form af valgmulighed1=v��rdi1&valgmulighed2=v��rdi2&valgmulighed3=
    v��rdi3 s��ledes at en fuld enheds-URI f.eks. kan v��re:<br>
    ipp://server.dom��ne:631/printere/k��navn?waitjob=false&waitprinter=false<br>
    Specielle tegn skal v��re procent-kodet (ogs�� kendt som URL-kodning).
    Et mellemrum ' 'skal f.eks. skrives som '%20',
    og et plus-tegn '+' skal skrives som '%2B'.<br>
    Nogle eksempler:<br>
    En USB-printer model 'Fun Printer 1000+' produceret af 'ACME'
    med serienummer 'A1B2C3' kan have denne enheds-URI:<br>
    usb://ACME/Fun%20Printer%201000%2B?serial=A1B2C3<br>
    En netv��rksprinter med IP 192.168.100.1, der er tilg��ngelig
    via port 9100, kan have denne enheds-URI:<br>
    socket://192.168.101.202:9100<br>
    En netv��rksprinter med IP 192.168.100.2 der er tilg��ngelig
    via LPD-protokol med det eksterne LPD-k��navn 'lpt1'
    kan have denne enheds-URI:<br>
    lpd://192.168.100.2/lpt1
    </p>

note: ConnectionWizardDialog help 3/6:
en: <p>
    <b><big>Device URIs for Directly Connected Devices</big></b><br>
    Devices which are connected via the parallel port or via USB
    are autodetected and the appropriate device URI is autogenerated.
    For example:<br>
    parallel:/dev/lp0<br>
    usb://ACME/FunPrinter<br>
    hp:/usb/HP_LaserJet?serial=1234<br>
    Usually only the autogenerated device URIs work.
    When the device is not autodetected, there is usually no communication
    with the device possible and no data can be sent to the device.
    </p>
target: <p>
    <b><big>Enheds-URI'er for direkte tilsluttede enheder</big></b><br>
    Enheder, som er tilsluttet via parallelport eller via USB, findes
    automatisk, og den passende enheds-URI genereres automatisk.
    For eksempel:<br>
    parallel:/dev/lp0<br>
    usb://ACME/FunPrinter<br>
    hp:/usb/HP_LaserJet?serial=1234<br>
    Normalt er det kun den automatisk genererede enheds-URI, der virker.
    Hvis enheden ikke findes automatisk, er der normalt ingen mulig
    kommunikation med enheden, og ingen data kan sendes til enheden.
    </p>

note: ConnectionWizardDialog help 4/6:
en: <p>
    <b><big>Device URIs to Access a Network Printer or a Printserver Box</big></b><br>
    A printserver box is a small device with a network connection
    and a USB or parallel port connection to connect the actual printer.
    A network printer has such kind of device built-in.
    Access happens via three different network protocols.
    See the manual of your network printer or printserver box
    what your particular device supports:<br>
    <b>TCP Port (AppSocket/JetDirect)</b><br>
    The IP address and a port number is needed to access it.
    Often the port number 9100 is the right one.
    It is the simplest, fastest, and generally the most reliable protocol.
    The matching device URI is:<br>
    socket://ip-address:port-number<br>
    <b>Line Printer Daemon (LPD) Protocol</b><br>
    A LPD runs on the device and provides one or more LPD queues.
    The IP address and a LPD queue name is needed to access it.
    Almost all network printers and printserver boxes support it.
    Often an arbitrary queue name or 'LPT1' works somehow.
    But using a correct LPD queue which does not somehow change
    the data or add additional formfeeds or banner pages
    could be essential for reliable printing.
    The matching device URI is:<br>
    lpd://ip-address/queue<br>
    <b>Internet Printing Protocol (IPP)</b><br>
    IPP is the native protocol for CUPS which runs on a real computer
    but when IPP is implemented in a small printserver box,
    it is often not implemented properly. Only use IPP when the vendor
    actually documents official support for it. 
    The matching device URI is:<br>
    ipp://ip-address:port-number/resource<br>
    What 'port-number' and 'resource' exactly is depends totally
    on the particular network printer or printserver box model.<br>
    For <b>more information</b> have a look at<br>
    http://www.cups.org/documentation.php/network.html
    </p>
target: <p>
    <b><big>Enheds-URI'er for adgang til en netv��rksprinter eller en printserverboks</big></b><br>
    En printserverboks er en lille enhed med en netv��rkstilslutning samt
    en USB- eller parallelport for tilslutning til den egentlige printer.
    En netv��rksprinter har s��dan en type enhed indbygget.
    Adgang sker via tre forskellige netv��rksprotokoller.
    Se i din netv��rksprinters eller printserverboks' manual,
    hvad din egen enhed underst��tter:<br>
    <b>TCP-port (AppSocket/JetDirect)</b><br>
    IP-adressen og portnummer skal bruges for at tilg�� den.
    Ofte er port nummer 9100 den rette.
    Det er den enkleste, hurtigste og generelt mest trov��rdige protokol.
    Den matchende enheds-URI er:<br>
    socket://ip-adresse:portnummer<br>
    <b>LPD-protokol (Line Printer Daemon)</b><br>
    En LPD k��rer p�� enheden og tilbyder en eller flere LPD-k��er.
    IP-adresse og et LPD-k��navn skal bruges for at tilg�� den.
    N��sten alle netv��rksprintere og printserverbokse underst��tter den.
    Ofte kan et vilk��rligt k��navn eller 'LPT1' fungere.
    Men at benytte en korrekt LPD-k��, der ikke p�� nogen m��de ��ndrer
    data, tilf��jer yderligere sideskift eller skilleark, kan v��re essentiel
    for en p��lidelig udskrift.
    Den passende enheds-URI er:<br>
    lpd://ip-adresse/k��<br>
    <b>IPP (Internet Printing Protocol)</b><br>
    IPP er den oprindelige protokol for CUPS, som k��rer p�� en reel computer.
    Men hvor IPP er implementeret i en lille printserverboks, er det ofte
    ikke implementeret ordentligt. Brug kun IPP, n��r producenten
    reelt dokumenterer underst��ttelse af den. 
    Den passende enheds-URI er:<br>
    ipp://ip-adresse:portnummer/ressource<br>
    Hvad 'portnummer' og 'ressource' n��jagtigt er afh��nger af
    den enkelte netv��rksprinter- eller printserverboks-model.<br>
    For <b>mere information</b> kig p��<br>
    http://www.cups.org/documentation.php/network.html
    </p>

note: ConnectionWizardDialog help 5/6:
en: <p>
    <b><big>Device URIs to Print Via a Print Server Machine</big></b><br>
    In contrast to a printserver box a print server machine
    means a real computer which offers a print service.<br>
    Access happens via various different network protocols.
    Ask your network administrator what which print server machine
    provides in your particular network:<br>
    <b>Microsoft Windows/SAMBA (SMB/CIFS)</b><br>
    A server name and a printer share name and optionally a workgroup name
    is needed to access it.
    Furthermore a user name and a password may be required to get access.
    A matching full device URI is:<br>
    smb://username:password@workgroup/server/printer<br>
    For <b>more information</b> have a look at <tt>man smbspool</tt> and<br>
    http://en.opensuse.org/SDB:Printing_via_SMB_(Samba)_Share_or_Windows_Share<br>
    <b>Traditional UNIX Server (LPR)</b><br>
    A Line Printer Daemon (LPD) runs on a traditional UNIX server
    and provides one or more LPD queues.
    The IP address and a LPD queue name is needed to access it.
    The matching device URI is:<br>
    lpd://ip-address/queue<br>
    <b>CUPS Server</b><br>
    Usually you should not set up a local print queue to access
    a remote queue on a CUPS server. Instead do the setup
    in the <b>Print Via Network</b> dialog.
    Only if you really know that you must set up a local print queue
    to access a remote queue on a CUPS server proceed here.<br>
    IPP is the native protocol for CUPS which runs on a server.
    The official IANA port for IPP is 631.
    The matching device URI is:<br>
    ipp://ip-address:631/printers/queue<br>
    <b>Novell Netware Print Server (IPX)</b><br>
    To access print queues on a Novell Netware print server,
    the RPM package ncpfs must be installed.
    The package provides the CUPS backend 'novell' which runs
    CUPS 1.1.18
    the <tt>nprint</tt> program which actually sends the data
    to a Novell Netware print queue.
    A server name and a printer queue name is needed to access it.
    Furthermore a user name and a password may be required to get access.
    The matching device URI is:<br>
    novell://username:password@server/queue<br>
    For <b>more information</b> have a look at <tt>man nprint</tt> and
    the other documentation in the RPM package ncpfs.
    </p>
target: <p>
    <b><big>Enheds-URI'er til udskrift via en udskriftservermaskine</big></b><br>
    I mods��tning til en printserverboks er en printservermaskine
    en reel computer, der tilbyder en udskrifttjeneste.<br>
    Adgang foreg��r via flere forskellige netv��rksprotokoller.
    Sp��rg din netv��rksadministrator, hvad hvilken printservermaskine
    tilbyder p�� dit netv��rk:<br>
    <b>Microsoft Windows/SAMBA (SMB/CIFS)</b><br>
    For at tilg�� dette kr��ves et servernavn, en printerdelingsnavn og
    valgfrit et navn p�� en arbejdsgruppe.
    Ydermere kan der kr��ves et brugernavn og en adgangskode for tilgang.
    En passende komplet enheds-URI er:<br>
    smb://brugernavn:adgangskode@arbejdsgruppe/server/printer<br>
    For <b>mere information</b> kig p�� <tt>man smbspool</tt> og<br>
    http://en.opensuse.org/SDB:Printing_via_SMB_(Samba)_Share_or_Windows_Share<br>
    <b>Traditionel UNIX-server (LPR)</b><br>
    En linjeprinterd��mon (LPD) k��rer p�� en traditionel UNIX-server
    og tilbyder en eller flere LPD-k��er.
    Der kr��ves en IP adresse og et LPD-k��navn for at tilg�� det.
    Den passende enheds-URI er:<br>
    lpd://ip-adresse/k��<br>
    <b>CUPS-server</b><br>
    Normalt skal du ikke s��tte en lokal udskriftsk�� op for at tilg��
    en ekstern k�� p�� en CUPS-server. Lav i stedet ops��tningen
    i dialogen <b>Udskrift via netv��rk</b>.
    Forts��t kun her, hvis du er sikker p��, at du skal s��tte en lokal
    udskriftsk�� op for at tilg�� en ekstern k�� p�� en CUPS-server.<br>
    IPP er den oprindelige protokol for CUPS, der k��rer p�� en server.
    Den officielle IANA-port til IPP er 631.
    Den passende enheds-URI er:<br>
    ipp://ip-adresse:631/printere/k��<br>
    <b>IPX (Novell Netware Print Server)</b><br>
    RPM-pakken ncpfs skal installeres for at tilg�� udskriftsk��er p��
    en Novell Netware printserver.
    Pakken leverer en CUPS-backend - 'novell' - der k��rer
    CUPS 1.1.18-programmet
    <tt>nprint</tt>, der faktisk sender dataene til en Novell
    Netware udskriftsk��.
    Der kr��ves servernavn og navn p�� udskriftsk�� for at f�� adgang.
    Ydermere kan der kr��ves et brugernavn og en adgangskode for tilgang.
    Den passende enheds-URI er:<br>
    novell://brugernavn:adgangskode@server/k��<br>
    For <b>mere information</b> kig p�� <tt>man nprint</tt> og
    den anden dokumentation i RPM-pakken ncpfs.
    </p>

note: ConnectionWizardDialog help 6/6:
en: <p>
    <b><big>Special Device URIs</big></b><br>
    <b>Specify an Arbitrary Device URI</b>
    if you know the exact right device URI for your particular case
    or to modify an existing device URI in a special way.<br>
    <b>Send Print Data to Other Program (pipe)</b><br>
    To do this, the RPM package cups-backends must be installed.
    The package provides the CUPS backend 'pipe' which runs
    the program that you specified here.
    The matching device URI is:<br>
    pipe:/path/to/targetcommand<br>
    <b>Daisy-chain Backend Error Handler (beh)</b><br>
    To do this, the RPM package cups-backends must be installed.
    The package provides the CUPS backend 'beh'.<br>
    The backend 'beh' is a wrapper for the usual backend,
    which is then called by beh.
    This way beh can, depending on its configuration,
    repeat the call of the backend or simply hide the error status
    of the backend from being seen by the CUPS daemon.
    The matching device URI is:<br>
    beh:/nodisable/attempts/delay/originalDeviceURI<br>
    If nodisable is '1' beh always exits successfully
    so that the queue gets never disabled but on the other hand
    print jobs are lost if there is an error.<br>
    Attempts is the number of attempts to recall the backend
    in case of an error. '0' means infinite retries.<br>
    Delay is the number of seconds between two attempts
    to call the backend.<br>
    The last parameter is the original URI, which the queue had before.<br>
    Example:<br>
    beh:/1/3/5/socket://ip-address:port-number<br>
    The beh backend tries to access a network printer 3 times with 5 second delay
    between the attempts. If access still fails, the queue is not disabled
    and the print job is lost.<br>
    For <b>more information</b> have a look at <tt>/usr/lib[64]/cups/backend/beh</tt> and<br>
    http://www.linuxfoundation.org/en/OpenPrinting/Database/BackendErrorHandler<br>
    </p>
target: <p>
    <b><big>Specielle enheds-URI'er</big></b><br>
    <b>Angiv en vilk��rlig enheds-URI</b>,
    hvis du kender det helt rigtige enheds-URI for dit tilf��lde, eller
    du vil ��ndre et eksisterende enheds-URI p�� en bestemt m��de.<br>
    <b>Send udskriftdata til andet program (pipe)</b><br>
    For at g��re dette skal RPM-pakken cups-backends installeres.
    Pakken leverer en CUPS-backend - 'pipe' - der k��rer det
    program, du har angivet her.
    Den passende enheds-URI er:<br>
    pipe:/sti/til/m��lkommando<br>
    <b>Fejlh��ndtering for Daisy-chain-backend (beh)</b><br>
    For at g��re dette skal RPM-pakken cups-backends installeres.
    Pakken leverer en CUPS-backend 'beh'.<br>
    Denne backend - 'beh' - er et omslag for den alm. backend,
    der s�� kaldes af beh.
    P�� denne m��de kan beh, afh��ngigt af dens konfiguration,
    gentage kaldet af backend, eller ganske enkelt forhindre, at
    backendens fejlstatus kan ses af CUPS-d��monen.
    Den passende enheds-URI er:<br>
    beh:/deaktiv��r_ikke/fors��g/forsinkelse/original_enheds-URI<br>
    Hvis 'deaktiv��r_ikke' er '1', vil beh altid afslutte, s�� k��en
    aldrig deaktiveres, men p�� den anden side mistes
    udskriftsjobs, hvis der er en fejl.<br>
    'Fors��g' er antal fors��g p�� at genkalde backenden i
    tilf��lde af fejl. '0' betyder uendelige genfors��g.<br>
    'Forsinkelse' er antal sekunder mellem to fors��g
    p�� at kalde backenden.<br>
    Den sidste parameter er den originale URI, som k��en havde f��r.<br>
    Eksempel:<br>
    beh:/1/3/5/socket://ip-adresse:portnummer<br>
    Backenden beh pr��ver at tilg�� netv��rksprinteren printer 3 gange
    med 5 sek. forsinkelse mellem fors��gene. Hvis tilgang stadig fejler,
    deaktiveres k��en ikke, og udskriftsjobbene mistes.<br>
    For <b>mere information</b> kig p�� <tt>/usr/lib[64]/cups/backend/beh</tt> og<br>
    http://www.linuxfoundation.org/en/OpenPrinting/Database/BackendErrorHandler<br>
    </p>

note: PrintingViaNetworkDialog help 1/3:
en: <p>
    <b><big>Printing Via Network</big></b><br>
    Usually CUPS (Common Unix Printing System) is used to print via network.<br>
    By default CUPS uses its so called 'Browsing' mode
    to make printers available via network.<br>
    In this case remote CUPS servers must publish their printers via network
    and accordingly on your host the CUPS daemon process (cupsd) must run
    which is listening for incomming information about published printers.<br>
    CUPS Browsing information is recieved via UDP port 631.
    </p>
target: <p>
    <b><big>Udskrift via netv��rk</big></b><br>
    Normalt benyttes CUPS (Common Unix Printing System) til udskrift via netv��rk.<br>
    Som standard bruger CUPS dens s��kaldte 'browsing'-tilstand
    til at g��re printere tilg��ngelige via netv��rk.<br>
    I s�� fald skal CUPS-servere publicere deres printere via netv��rk, og
    f��lgelig skal CUPS-d��monprocessen (cupsd) k��re p�� din maskine.
    Denne lytter efter information om publicerede printere.<br>
    CUPS' browsing-information modtages via UDP-port 631.
    </p>

note: PrintingViaNetworkDialog help 2/3:
en: <p>
    If you print only via network and if you use only one single CUPS server,
    there is no need to use CUPS Browsing and have a CUPS daemon running on your host.
    Instead it is simpler to specify the CUPS server and access it directly.
    </p>
target: <p>
    Hvis du kun udskriver via netv��rk, og hvis du kun bruger en enkelt CUPS-server,
    beh��ver du ikke benytte CUPS-browsing og have en CUPS-d��mon k��rende p�� din v��rt.
    I stedet er det enklere at angive CUPS-serveren og tilg�� den direkte.
    </p>

note: PrintingViaNetworkDialog help 3/3:
en: <p>
    If there is no CUPS server in your network or if you must additionally use
    another kind of print server (e.g. print via a Windows/SMB server
    or print via a traditional Unix LPR server) or if you must access
    a network printer directly, you have to set up an appropriate print queue
    on your host.
    </p>
target: <p>
    Hvis der ikke findes nogen CUPS-server p�� dit netv��rk, hvis du
    yderligere skal bruge en anden slags udskriftserver (f.eks. udskrift
    via en Windows/SMB server eller en traditionel Unix LPR-server),
    eller hvis du skal tilg�� en netv��rksprinter direkte, skal du s��tte
    en passende udskriftsk�� op p�� din v��rt.
    </p>

note: SharingDialog help 1/2:
en: <p>
    <b><big>Sharing Print Queues and Publish Them Via Network</big></b><br>
    Usually CUPS (Common Unix Printing System) should be set up to use
    its so called 'Browsing' mode to make printers available via network.<br>
    In this case CUPS servers publish their local print queues via network
    and accordingly on CUPS client systems the CUPS daemon process (cupsd) must run
    which is listening for incomming information about published printers.<br>
    CUPS Browsing information is recieved via UDP port 631.
    </p>
target: <p>
    <b><big>Dele udskriftsk��er og publicere dem via netv��rk</big></b><br>
    CUPS (Common Unix Printing System) skulle normalt v��re sat op til at bruge
    dens s��kaldte 'browsing'-tilstand, for at g��re dem tilg��ngelige via netv��rk.<br>
    I s�� fald publicerer CUPS-servere deres printere via netv��rk, og
    f��lgelig skal CUPS-d��monprocessen (cupsd) k��re p�� din maskine.
    Denne lytter efter information om publicerede printere.<br>
    CUPS' browsing-information modtages via UDP-port 631.
    </p>

note: SharingDialog help 2/2:
en: <p>
    First of all CUPS client systems must be allowed to access the CUPS server.
    Then specify whether or not printers should be published to the clients.
    It is not required to publish printers in any case.
    If you have only one single CUPS server, there is no need to use CUPS Browsing.
    Instead it is simpler to specify the CUPS server on the client systems
    (via 'Printing Via Network') so that the clients access the server directly.
    </p>
target: <p>
    Alle CUPS klientsystemer skal f��rst og fremmest have lov til at tilg�� CUPS-serveren.
    Angiv derefter, hvorvidt printere skal publiceres til klienterne eller ej.
    Det kr��ves ikke, at printere skal publiceres i nogen tilf��lde.
    Der er ingen grund til at bruge CUPS-browsing, hvis du blot har en enkelt CUPS-server.
    I stedet er det enklere at angive CUPS-serveren p�� klientsystemerne
    (via 'Udskrift via netv��rk'), s�� klienterne kan tilg�� serveren direkte.
    </p>

note: Policies help 1/2:
en: <p>
    <b><big>CUPS Operation Policy</big></b><br>
    Operation policies are the rules used for each operation in CUPS.
    Such operations are for example 'print something', 'cancel a printout',
    'configure a printer', 'modify or remove a printer configuration',
    and 'enable or disable printing'.
    </p>
target: <p>
    <b><big>CUPS' handlingspolitik</big></b><br>
    Handlingspolitik er reglerne, der anvendes til hver handling i CUPS.
    S��danne handlinger kan f.eks. v��re 'skriv noget ud', 'annull��r en udskrift',
    'konfigur��r en printer', '��ndr eller fjern en printerkonfiguration' og
    'aktiv��r eller deaktiv��r udskrift'.
    </p>

note: Policies help 2/2:
en: <p>
    <b><big>CUPS Error Policy</big></b><br>
    The error policy defines the default policy that is used when
    CUPS fails to send a print job to the printer device.<br>
    Depending on the particular way how the printer is connected
    (for example 'parallel', 'usb', 'socket', 'lpd', or 'ipp'),
    and depending on the actual kind of failure,
    the CUPS backend which actually sends the data to the printer
    can overwrite the default error policy
    and enforce another error policy (see 'man backend').
    For example it can stop any further printing attempt
    even when the default error policy is to retry the job.
    This could happen when any attempt to establish
    the communication with the printer is useless
    so that it does no make sense to retry the job.
    <br>
    The following error policies exist:<br>
    Stop the printer and keep the job for future printing.<br>
    Re-send the job from the beginning after waiting some time (30 seconds by default).<br>
    Abort and delete the job and proceed with the next job.
    </p>
target: <p>
    <b><big>CUPS fejlpolitik</big></b><br>
    Fejlpolitik definerer den standardpolitik, der anvendes, n��r
    CUPS fejler i at sende et udskriftjob til printer-enheden.<br>
    Afh��ngigt af m��den printeren er tilsluttet (f.eks. 'usb',
    'socket', 'lpd' eller 'ipp'), og afh��ngigt af den aktuelle
    fejl, kan den backend til CUPS, som faktisk sender data til
    printeren, overskrive standard-fejlpolitikken og
    gennemtvinge en anden fejlpolitik
    (se 'man backend').
    Den kan f.eks. stoppe videre fors��g p�� udskrivning,
    selvom standard-fejlpolitikken er at fors��ge igen.
    Dette kan ske, n��r et fors��g p�� at etablere en
    kommunikation med printeren er nyttel��s, s��ledes
    er der ingen fornuft i at fors��ge jobbet igen.
    <br>
    F��lgende fejlpolitikker findes:<br>
    Stop printeren, og gem jobbet til senere udskrivning.<br>
    Send jobbet igen fra begyndelsen efter at have ventet en tid (standard 30 sekunder).<br>
    Afbryd og slet jobbet, og g�� videre til det n��ste job.
    </p>

note: Autoconfig help 1/1:
en: <p>
    <b><big>CUPS Autoconfiguration for USB Printers</big></b><br>
    When a USB printer is connected to the system
    cups-autoconfig determines if the printer is already configured. 
    If it is already configured, printing is enabled.
    If the printer is not configured, cups-autoconfig attempts
    to select an appropriate driver for it and, if successful,
    cups-autoconfig configures it.
    When a USB printer is removed, cups-autoconfig can disable printing.
    </p>
target: <p>
    <b><big>Automatisk konfiguration af CUPS  for USB-printere</big></b><br>
    N��r en USB-printer tilsluttes systemet afg��r cups-autoconfig
    om printeren allerede er konfigureret.
    Hvis dette er tilf��ldet, er udskrift aktiveret.
    Hvis printeren derimod ikke er konfigureret vil cups-autoconfig
    fors��ge at v��lge en passende driver for den, og, hvis det lykkes,
    konfigurere denne.
    N��r en USB-printer fjernes, kan cups-autoconfig deaktivere udskrift.
    </p>

note: Useless help 1/1:
en: <p>
    <b><big>Intentionally no help</big></b><br>
    This is an experimental YaST module.<br>
    The dialog should be self-explanatory.<br>
    Usability experts state that a UI is very likely
    bad designed when explanation texts are needed.<br>
    For a real test whether the dialog is self-explanatory or not,
    there must be no help text at all.<br>
    Unfortunately it is not possible to remove the
    help sub-window from 'Wizard' dialogs
    (this dialog is a so called 'Wizard' dialog).
    </p>
target: <p>
    <b><big>Bevidst ingen hj��lp</big></b><br>
    Dette er et eksperimentelt YaST-modul.<br>
    Dialogen skulle v��re selvforklarende.<br>
    Eksperter i brugervenlighed udtaler, at hvis forklarende tekster
    er n��dvendige, er den grafiske brugerflade d��rligt designet.<br>
    For virkelig at teste, om dialogen er selvforklarende eller ej,
    m�� der slet ikke v��re nogen hj��lpetekst.<br>
    Desv��rre er det ikke muligt at fjerne sub-vinduet 'Hj��lp' fra
    'guide'-dialogerne (denne dialog er en s��kaldt guide-dialog).
    </p>

note: Label for CheckBoxes to select local and/or remote print queues to be listed:
en: Show
target: Vis

note: CheckBox to select local print queues to be listed:
en: &Local
target: &Lokal

note: CheckBox to select remote print queues to be listed:
en: &Remote
target: Ekste&rn

note: Header of a Table column with a list of print queues. Where the queue configuration exists (local or remote):
en: Configuration
target: Konfiguration

note: Header of a Table column with a list of print queues. Print queue name:
en: Name
target: Navn

note: Header of a Table column with a list of print queues. Location of the printer (e.g. second floor, room 2.3):
en: Location
target: Placering

note: Header of a Table column with a list of print queues. Whether or not is is the default queue:
en: Default
target: Standard

note: PushButton label to modify an already configured print queue:
en: &Configure
target: &Konfigur��r

note: PushButton label to refresh the list of print queues:
en: Re&fresh List
target: Genop&frisk liste

note: PushButton label to print a test page:
en: Print &Test Page
target: Udskriv &testside

note: Show the CUPS server name if it is a client-only config where %1 will be replaced by the CUPS server name.
en: CUPS Server %1
target: CUPS-server %1

note: Body of a Popup::AnyMessage when no queue was selected from the list:
en: Select an entry.
target: V��lg en indgang.

note: Header of a Popup::AnyMessage when a remote queue was selected to be deleted:
en: Cannot Delete
target: Kan ikke slette

note: Body of a Popup::AnyMessage when a remote queue was selected to be deleted:
en: This is a remote configuration. Only local configurations can be deleted.
target: Denne er en ekstern konfiguration. Kun lokale konfigurationer kan slettes.

note: Header of a confirmation popup before a queue will be deleted:
en: Confirm Deletion
target: Bekr��ft sletning

note: Body of a confirmation popup before a queue will be deleted:
en: The selected configuration would be deleted immediately and cannot be restored.
target: Den valgte konfiguration vil blive slettet omg��ende og kan ikke genoprettes.

note: 'Yes' button label of a confirmation popup before a queue will be deleted:
en: Delete configuration %1
target: Slet konfiguration %1

note: 'No' button label of a confirmation popup before a queue will be deleted:
en: Do not delete it
target: Slet den ikke

note: Message of a Popup::Error where %1 will be replaced by the queue name. Only a simple message because before the function Printer::DeleteQueue was called and this function would have shown more specific messages.
en: Failed to delete configuration %1.
target: Sletning af konfiguration %1 fejlede.

note: Header of a Popup::AnyMessage when the queue rejects print jobs:
en: Rejecting Print Jobs
target: Afviser udskriftsjobs

note: Body of a Popup::AnyMessage when the queue rejects print jobs:
en: The testpage cannot be printed because print jobs are rejected.
target: Denne testside kan ikke udskrives, da udskriftsjobs afvises.

note: Header of a Popup::AnyMessage when printing is disabled for the queue:
en: Printout Disabled
target: Udskrift deaktiveret

note: Body of a Popup::AnyMessage when printing is disabled for the queue:
en: The testpage cannot be printed because printout is disabled.
target: Denne testside kan ikke udskrives, da udskrift er deaktiveret.

note: Message of a Popup::Error where %1 will be replaced by the queue name. Only a simple message because this error does not happen on a normal system (i.e. a system which is not totally broken or totally messed up).
en: Failed to print testpage for %1.
target: Udskrift af testside for %1 fejlede.

note: Popup message where %1 will be replaced by the queue name.
en: Sent testpage to %1. It should start to print soon.
target: Sendte testside til %1. Udskrift skulle starte om et ��jeblik.

note: PopupYesNoHeadline headline where %1 will be replaced by the server name: It was initially a client-only config, but now the user has activated the "Get browsing info" radio button. "Get browsing info" means "no longer client-only" regardless if the browse_allow_value string is effectively empty or 
en: Disable remote CUPS server '%1'
target: Deaktiv��r ekstern CUPS-server '%1'

note: PopupYesNoHeadline body:
en: A remote CUPS server setting conflicts with adding a configuration.
target: En ekstern CUPS serverindstilling konflikter med tilf��jelse af konfiguration.

note: Popup::ErrorDetails message. Only a simple message because this error does not happen on a normal system (i.e. a system which is not totally broken or totally messed up). Popup::ErrorDetails message:
en: Failed to remove the 'ServerName' entry in /etc/cups/client.conf
target: Fjernelse af indgangen 'ServerName' i /etc/cups/client.conf fejlede

note: Header of a Popup::AnyMessage when a remote queue was selected to be modified:
en: Cannot Modify
target: Kan ikke ��ndre

note: Body of a Popup::AnyMessage when a remote queue was selected to be modified:
en: This is a remote configuration. Only local configurations can be modified.
target: Dette er en ekstern konfiguration. Kun lokale konfigurationer kan ��ndres.

note: An entry for a ComboBox from which the user can select that the CUPS error policy which is used when it fails to send a job to the printer is to stop the printer and keep the job for future printing:
en: stop the printer and keep the job for future printing
target: stop printeren, og gem jobbet til senere udskrivning

note: An entry for a ComboBox from which the user can select that the CUPS error policy which is used when it fails to send a job to the printer is to re-send the job from the beginning after waiting some time (the default JobRetryInterval is 30 seconds but this can be changed):
en: re-send the job from the beginning after waiting some time
target: send jobbet igen fra begyndelsen efter at have ventet en tid

note: An entry for a ComboBox from which the user can select that the CUPS error policy which is used when it fails to send a job to the printer is to abort and delete the job and proceed with the next job:
en: abort and delete the job and proceed with the next job
target: afbryd og slet jobbet, og g�� videre til det n��ste job

note: Header for a ComboBox to specify the CUPS error policy:
en: Specify the &error policy
target: Angiv f&ejlpolitikken

note: CheckBox to apply the CUPS error policy which is selected in the ComboBox above to all local printer configurations (i.e. to all local print queues). When possible we perefer to use the wording "printer configuration" instead of "print queue" because the latter may sound too technical but sometimes 
en: &Apply this error policy to all local printer configurations
target: &Anvend denne fejlpolitik p�� alle lokale printerkonfigurationer

note: Header for a ComboBox to specify the CUPS operation policy:
en: Specify the &operation policy
target: Angiv handlingsp&olitikken

note: CheckBox to apply the CUPS operation policy which is selected in the ComboBox above to all local printer configurations (i.e. to all local print queues). When possible we perefer to use the wording "printer configuration" instead of "print queue" because the latter may sound too technical but someti
en: Apply this operation &policy to all local printer configurations
target: Anvend denne handlings&politik p�� alle lokale printerkonfigurationer.

note: PopupYesNoHeadline body:
en: A remote CUPS server setting conflicts with setting policies for the local system.
target: En ekstern CUPS serverindstilling konflikter med ops��tningspolitikker for det lokale system.

note: Popup::ErrorDetails message where %1 will be replaced by the print queue name.
en: Failed to apply the policy to '%1'
target: Anvendelse af fejlpolitikken p�� '%1' fejlede.

note: Popup::ErrorDetails message where %1 will be replaced by the default operation policy value. Do not change or translate "DefaultPolicy", it is a system settings name.
en: Failed to set 'DefaultPolicy %1' in /etc/cups/cupsd.conf
target: Mislykkedes at s��tte 'DefaultPolicy %1' i /etc/cups/cupsd.conf

note: Popup::ErrorDetails message where %1 will be replaced by the default error policy value. Do not change or translate "ErrorPolicy", it is a system settings name.
en: Failed to set 'ErrorPolicy %1' in /etc/cups/cupsd.conf
target: Mislykkedes at s��tte 'ErrorPolicy %1' i /etc/cups/cupsd.conf

note: Command line help text for the Xprinter module
en: Configuration of printer
target: Konfiguration af printer

en: No printer queue configured.
target: Ingen printerk�� konfigureret

note: An entry for a ComboBox from which the user can select that printer information is accepted from all remote CUPS servers:
en: all hosts
target: alle v��rter

note: An entry for a ComboBox from which the user can select that printer information is accepted from remote CUPS servers in the local network:
en: hosts in the local network
target: v��rter p�� det lokale netv��rk

note: An entry for a ComboBox from which the user can select that printer information is accepted only from remote CUPS servers with specific addresses where the specific addresses are specified in a TextEntry below:
en: only specific addresses
target: kun specifikke adresser

note: A caption for a Frame to set up to use CUPS to print via network:
en: Use CUPS to Print Via Network
target: Brug CUPS til udskrift via netv��rk

note: A RadioButton to not receive printer information from remote CUPS servers:
en: &Do not Receive Printer Information from Remote CUPS servers
target: Mo&dtag ikke printerinformation fra eksterne CUPS-servere

note: A RadioButton to receive printer information from remote CUPS servers:
en: Receive Printer &Information from Remote CUPS servers
target: Modtag printer&information fra eksterne CUPS-servere

note: A header for a section to set up from which remote CUPS servers printer information is accepted:
en: Accept Information from the Following Servers
target: Accept��r information fra de f��lgende servere

note: A header for a ComboBox from which the user can select a usual general setting from which remote CUPS servers printer information is accepted:
en: Usual &General Setting
target: Normal &generel indstilling

note: A header for a TextEntry where the user can optionally enter specific IP addresses and/or network/netmask from where remote printer information is accepted:
en: Optional Specific IP Addresses or &Network/Netmask
target: Valgfrie specifikke IP-adresser eller &netv��rk/netmaske

note: Label to show the syntax for the TextEntry where the user can enter specific IP addresses and/or network/netmask from where remote printer information is accepted: Label to show the syntax for the TextEntry to allow remote access to local print queues from IP addresses and/or networks:
en: (each nnn.nnn.nnn.nnn or nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm separated by one space)
target: (hvert nnn.nnn.nnn.nnn eller nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm adskilt med ��t mellemrum)

note: A RadioButton to do all printing tasks directly only via one single remote CUPS server:
en: Do All Your Printing Directly via &One Remote CUPS Server
target: F&oretag alle dine udskrifter direkte via ��n ekstern CUPS-server

note: A header for a TextEntry where the user can enter the one single remote CUPS server which is used to do all his printing tasks:
en: &Hostname / IP Address
target: &V��rtsnavn / IP-adresse

note: A PushButton to test whether or not the one single remote CUPS server which is used to do all printing tasks is accessible:
en: &Test Server
target: &Test server

note: A caption for a Frame to set up to use another (i.e. non-CUPS) print server or to set up to use a network printer directly:
en: Use Another Print Server or Use a Network Printer Directly
target: Brug en anden udskriftserver, eller brug en netv��rksprinter direkte

note: Popup message where %1 will be replaced by the server name.
en: The server '%1' is accessible via port 631 (IPP/CUPS).
target: Serveren '%1' er tilg��ngelig via port 631 (IPP/CUPS).

note: Popup message where %1 will be replaced by the server name.
en: The server '%1' is not accessible via port 631 (IPP/CUPS).
target: Serveren '%1' er ikke tilg��ngelig via port 631 (IPP/CUPS).

note: Popup message where %1 will be replaced by the server name.
en: The server '%1' responds to a 'ping' in the network.
target: Serveren '%1' svarer p�� et 'ping' p�� netv��rket.

note: Popup message where %1 will be replaced by the server name.
en: The server '%1' does not respond to a 'ping' in the network.
target: Serveren '%1' svarer ikke p�� et 'ping' p�� netv��rket.

note: Popup message where %1 will be replaced by the server name.
en: The server name '%1' is known in the network.
target: Servernavnet '%1' er kendt p�� netv��rket.

note: Popup message where %1 will be replaced by the server name.
en: The server name '%1' is not known in the network.
target: Servernavnet '%1' er ikke kendt p�� netv��rket.

note: netcat is required for a meaningful test. Show negative feedback: Popup::ErrorDetails message:
en: Cannot execute the program 'netcat'
target: Kan ikke eksekvere programmet 'netcat'

note: Popup::ErrorDetails details:
en: The RPM package 'netcat' is required for a meaningful test.
target: RPM-pakken 'netcat' kr��ves, for at testen giver mening.

note: ping is required for the less meaningful test. Show negative feedback: Popup::ErrorDetails message
en: Cannot execute the program 'ping'
target: Kan ikke eksekvere programmet 'ping'

note: Popup::ErrorDetails details:
en: The RPM package 'iputils' is required for a meaningful test.
target: RPM-pakken 'iputils' kr��ves, for at testen giver mening.

note: The netcat-test failed but the ping-test was successful. Show negative feedback: Popup::ErrorDetails message where %1 will be replaced by the server name.
en: The server '%1' is not accessible
target: Serveren '%1' er ikke tilg��ngelig

note: host is required for the last test. Show negative feedback: Popup::ErrorDetails message
en: Cannot execute the program 'host'
target: Kan ikke eksekvere programmet 'host'

note: Popup::ErrorDetails details:
en: The RPM package 'bind-utils' is required for a meaningful test.
target: RPM-pakken 'bind-utils' kr��ves, for at testen giver mening.

note: The netcat-test and the ping-test failed but the host-test was successful. Show negative feedback: Popup::ErrorDetails message where %1 will be replaced by the server name.
en: The server '%1' does not respond in the network
target: Serveren '%1' svarer ikke p�� netv��rket

note: The netcat-test and the ping-test and the host-test failed: Show negative feedback: Popup::ErrorDetails message where %1 will be replaced by the server name.
en: The server '%1' is unknown
target: Serveren '%1' er ukendt

note: Popup::ErrorDetails message:
en: Failed to set 'BrowseAllow none' in /etc/cups/cupsd.conf
target: Mislykkedes at s��tte 'BrowseAllow none' i /etc/cups/cupsd.conf

note: A "Get browsing info" config with a local cupsd was switched to a "No browsing info" config with a local running cupsd. The Printerlib::GetAndSetCupsdStatus("restart") function already waits 40 seconds but the default BrowseTimeout value for the local cupsd is 5 minutes. Therefore it takes by defaul
en: When switching from 'receive information' to 'do not receive information'
    it takes usually 5 minutes until already received information faded away...
target: Under skift fra 'modtag information' til 'modtag ikke information' tager
    det normalt 5 minutter, f��r allerede modtaget information fortoner sig...

note: Popup::ErrorDetails message where %1 will be replaced by the server name.
en: Failed to set 'ServerName %1' in /etc/cups/client.conf
target: Mislykkedes at s��tte 'ServerName %1' i /etc/cups/client.conf

note: PopupYesNoHeadline body:
en: A remote CUPS server setting conflicts with receiving printer information.
target: En ekstern CUPS serverindstilling konflikter med modtagelse af printerinformation.

note: Popup::ErrorDetails message:
en: Failed to set 'Browsing On' in /etc/cups/cupsd.conf
target: Mislykkedes at s��tte 'Browsing On' i /etc/cups/cupsd.conf

note: Popup::ErrorDetails message where %1 will be replaced by the values for BrowseAllow.
en: Failed to set BrowseAllow value(s) '%1' in /etc/cups/cupsd.conf
target: Mislykkedes at s��tte BrowseAllow-v��rdierne '%1' i /etc/cups/cupsd.conf

note: Header of a Popup::ContinueCancelHeadline when a client-only server is not accessible where %1 will be replaced by the server name:
en: Continue regardless that '%1' is not accessible?
target: Vil du forts��tte, selvom '%1' ikke er tilg��ngelig?

note: Body of a Popup::ContinueCancelHeadline when a client-only server is not accessible:
en: A non-accessible server leads to an endless sequence of further failures.
target: En ikke-tilg��ngelig server f��rer til en uendelig sekvens af yderligere fejl.

note: The user has decided to continue regardless that the client-only server is not accessible. In this case the cups_client_only tool fails in any case because it also tests accessibility. But cups_client_only might have failed for whatever other reason. Therefore a Popup::MessageDetails is shown to inf
en: Tried to set 'ServerName %1' in /etc/cups/client.conf
target: Pr��vede at s��tte 'ServerName %1' i /etc/cups/client.conf

note: A RadioButton label to deny remote access to local print queues:
en: &Deny remote access
target: N��gt ekstern a&dgang

note: A RadioButton label to allow remote access to local print queues:
en: &Allow remote access
target: Till&ad ekstern adgang

note: A CheckBox label to allow remote access to local print queues for computers within the local network:
en: For computers within the &local network
target: Til computere indenfor det &lokale netv��rk

note: A CheckBox label to publish local print queues by default within the local network:
en: &Publish printers by default within the local network
target: &Public��r printere som standard indenfor det lokale netv��rk

note: A caption for a table to allow remote access to local print queues via network interfaces specified in the table below:
en: Via network interfaces specified below
target: Via netv��rksgr��nsefladerne angivet herunder

note: A table column header where the column lists network interfaces:
en: Interface
target: Gr��nseflade

note: A table column header where the column shows whether or not local print queues are published by default via the network interface in the other table column:
en: Publish printers by default via this interface
target: Public��r printere som standard via denne gr��nseflade

note: A PushButton label to add a network interface to the table which shows the network interfaces to allow remote access to local print queues:
en: &Add
target: &Tilf��j

note: A PushButton label to change a network interface in the table which shows the network interfaces to allow remote access to local print queues:
en: &Edit
target: &Redig��r

note: A PushButton label to delete a network interface from the table which shows the network interfaces to allow remote access to local print queues:
en: &Delete
target: &Slet

note: A caption to allow remote access to local print queues for hosts and/or networks specified in two TextEntries below:
en: For Experts: Optional Specific IP Addresses or Networks
target: For eksperter: Valgfrie specifikke IP-adresser eller netv��rk

note: TextEntry to allow remote access to local print queues for hosts and/or networks:
en: Allow remote access from those IP addresses or &network/netmask
target: Tillad ekstern adgang fra disse IP-adresser eller &netv��rk/netmaske

note: TextEntry to publish local print queues to IP addresses and/or network broadcast addresses:
en: Publish to those IP addresses or network &broadcast addresses
target: Public��r til disse IP-adresser eller netv��rk-&broadcast-adresser

note: Label to show the syntax for the TextEntry to to publish local print queues to hosts and/or networks:
en: (each nnn.nnn.nnn.nnn or nnn.nnn.nnn.255 separated by one space)
target: (hvert nnn.nnn.nnn.nnn eller nnn.nnn.nnn.255 adskilt med ��t mellemrum)

note: A caption to make Firewall settings to allow remote access to CUPS:
en: Firewall Settings
target: Firewall-indstillinger

note: A CheckBox label to publish local print queues by default via a partivular network interface which is shown below.
en: &Publish printers by default via the network interface below.
target: &Public��r printere som standard via netv��rksgr��nsefladen herunder.

note: A header for a ComboBox which lists network interfaces:
en: Available Network &Interfaces:
target: Tilg��ngelige netv��rks&gr��nseflader:

note: Popup::ErrorDetails message. Do not change or translate "Listen localhost", it is a system settings name.
en: Failed to set only 'Listen localhost' in /etc/cups/cupsd.conf
target: Mislykkedes kun at s��tte 'Listen localhost' i /etc/cups/cupsd.conf

note: Popup::ErrorDetails message. Do not change or translate "Allow", it is a system settings name.
en: Failed to remove 'Allow' entries from /etc/cups/cupsd.conf
target: Mislykkedes at fjerne 'Allow'-indgange fra /etc/cups/cupsd.conf

note: Popup::ErrorDetails message. Do not change or translate "BrowseAddress", it is a system settings name.
en: Failed to remove 'BrowseAddress' entries from /etc/cups/cupsd.conf
target: Mislykkedes at fjerne 'BrowseAddress'-indgange fra /etc/cups/cupsd.conf

note: Popup::ErrorDetails message where %1 will be replaced by one or more system settings values. Do not change or translate "Allow", it is a system settings name.
en: Failed to set 'Allow' entries '%1' in /etc/cups/cupsd.conf
target: Mislykkedes at s��tte 'Allow'-indgangene '%1' i /etc/cups/cupsd.conf

note: Popup::ErrorDetails message where %1 will be replaced by one or more system settings values. Do not change or translate "BrowseAddress", it is a system settings name.
en: Failed to set 'BrowseAddress' entries '%1' in /etc/cups/cupsd.conf
target: Mislykkedes at s��tte 'BrowseAddress'-indgangene '%1' i /etc/cups/cupsd.conf

note: Popup::ErrorDetails message. Do not change or translate "Listen *:631", it is a system settings name.
en: Failed to set 'Listen *:631' in /etc/cups/cupsd.conf
target: Mislykkedes at s��tte 'Listen *:631' i /etc/cups/cupsd.conf

note: PopupYesNoHeadline body:
en: A remote CUPS server setting conflicts with sharing local printer configurations.
target: En ekstern CUPS serverindstilling konflikter med deling af lokale printerkonfigurationer.

note: Label when not the Suse Firewall but another firewall is used:
en: Not the Suse Firewall but another firewall is used
target: Ikke SuSEfirewall2 men en anden firewall bruges

note: Label when the Suse Firewall is not running:
en: The Suse Firewall is not active
target: SuSEfirewall2 er ikke aktiv

note: CheckBox whether or not the Suse Firewall allows CUPS access from the INT zone:
en: Allow access from the internal network zone
target: Tillad adgang fra den interne netv��rkszone

note: Label when the Suse Firewall does not potect the internal network zone which means that CUPS access from the INT zone is allowed:
en: Access from the internal network zone is allowed
target: Adgang fra den interne netv��rkszone tillades

note: CheckBox whether or not the Suse Firewall denies CUPS access from the EXT zone:
en: Deny access from the external network zone
target: N��gt adgang fra den eksterne netv��rkszone

note: Label when the Suse Firewall denies CUPS access from the external network zone:
en: Access from the external network zone is denied
target: Adgang fra den eksterne netv��rkszone n��gtes

note: Initialization dialog caption
en: Printer Configuration
target: Konfiguration af printer

note: Initialization dialog contents
en: Initializing...
target: Initialiserer...
