https://bugzilla.novell.com/show_bug.cgi?id=694535
https://bugzilla.novell.com/show_bug.cgi?id=694535#c4
--- Comment #4 from Vladimir Anufriev
(In reply to comment #2)
During installation procedure partitioner claims that /dev/sda exists and there are no /dev/cciss/... devices.
That is weird. I'd like to know what that /dev/sda is.
The next similar device (RAM=36Gb is the only diff) works well with some workaround: 1. loading from HP SmartStart DVD 2. create RAID and logical disks 3. start to install Windows 4. when installer requires to insert Windows DVD reboot from OpenSuse installation After that partitioner can work with partition table. Without step 3 partitioner claim that it can not read and write partitions. This is from 11.4 partitioner ├┬─Hard Disks ││Device │ Size│F│Enc│Type │FS Type│Label│Mount Point │ │ │└┬─sda ││/dev/sda │820.21 GB│ │ │HP-LOGICAL VOLUME│ │ │ │ │ │ ├──sda1 ││/dev/sda1│100.00 GB│ │ │Linux native │Ext4 │ │/ │ │ │ ├──sda2 ││/dev/sda2│ 10.00 GB│ │ │Linux swap │Swap │ │swap │ │ │ └──sda3 ││/dev/sda3│710.21 GB│ │ │Linux native │Ext4 │ │/opt │ This is from 11.3 partitioner ├┬─Hard Disks ││Device │ Size│F│Enc│Type │FS Type│Label│Mount Point │ │ │├┬─cciss/c0d0 ││/dev/cciss/c0d0 │820.21 GB│ │ │ │ │ │ │ │ ││├──cciss/c0d0p1 ││/dev/cciss/c0d0p1│100.00 GB│ │ │Linux native │Ext4 │ │/ │ │ ││├──cciss/c0d0p2 ││/dev/cciss/c0d0p2│ 2.00 GB│ │ │Linux swap │Swap │ │swap │ │ ││└──cciss/c0d0p3 ││/dev/cciss/c0d0p3│718.21 GB│ │ │Linux native │Ext4 │ │/opt │ -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.