https://bugzilla.novell.com/show_bug.cgi?id=299575 Summary: Opensuse 10.3 beta1 X86-64 will not install on SB600 / RD580 based motherboard - ahci module will not load Product: openSUSE 10.3 Version: Beta 1 Platform: x86-64 OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: jerbes@gmail.com QAContact: qa@suse.de CC: mkoenig@novell.com Depends on: 246701 Found By: Beta-Customer System maniboard: MSI K9A PLATINUM (SB600 / RD580) chipset CPU: Athlon64 5200 dual core RAM: 2 GB HD: Western Digital SATA2 Other: pata DVD writer I have a Athlon64 dual core in a MSI K9A PLATINUM motherboard, and for instaling OSS 10.2, I must to install with "install pci=nomsi" in the command line. Later I upgrade it to OSS 10.3 alpha 6, and it works without important problems (32 bit version). In the booth parameter uses But now I downloaded the kde x86-64 iso, verified the checksum, it was ok, and it will not install on my SB600 / RD580 based motherboard. I must boot in with the parameter "pci=nomsi" in 10.3 alpha 6, I triyed to remove it, and the system do'nt loads. I tryed with safe settings, acpi off, and with "install pci=nomsi", but the ahci module will not load. The bios is setted to "Native IDE", but it was the same in 10.2 and 10.3 alpha 6 if it was setted to "ahci". Other detail, after the upgrade to 10.3 alpha 6, I changed the dvd burner from a Asus ATAPI, to a LITE-ON DVDRW LH-20A1H (20x burning dvds), and I must to change the driver from the ide-generic to pata_atiixp, to lograte that it works with k3b. In the installation proces the system stops for about 2 minutes trying to load de ahci driver module (in 10.2 32 bits I got the same problem without the "install pci=nomsi" in the command line), but this option will not work now in 10.3 beta1 X86-64. Now the loaded modules for the disk controllers with 10.3 alpha 6 32 bits are: pata_atiixp 11904 0 ahci 25348 4 libata 120396 2 pata_atiixp,ahci scsi_mod 140248 5 usb_storage,sr_mod,sg,sd_mod,libata -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.