[Bug 299575] New: Opensuse 10.3 beta1 X86-64 will not install on SB600 / RD580 based motherboard - ahci module will not load - openSUSE Bugs - openSUSE Mailing Lists

newer
[Bug 190030] Default grub...

[Bug 299575] New: Opensuse 10.3 beta1 X86-64 will not install on SB600 / RD580 based motherboard - ahci module will not load

older
[Bug 304229] New: nspluginwrapper...

bugzilla_noreply＠novell.com

11 Aug 2007 11 Aug '07

13:26

https://bugzilla.novell.com/show_bug.cgi?id=299575 Summary: Opensuse 10.3 beta1 X86-64 will not install on SB600 / RD580 based motherboard - ahci module will not load Product: openSUSE 10.3 Version: Beta 1 Platform: x86-64 OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: jerbes@gmail.com QAContact: qa@suse.de CC: mkoenig@novell.com Depends on: 246701 Found By: Beta-Customer System maniboard: MSI K9A PLATINUM (SB600 / RD580) chipset CPU: Athlon64 5200 dual core RAM: 2 GB HD: Western Digital SATA2 Other: pata DVD writer I have a Athlon64 dual core in a MSI K9A PLATINUM motherboard, and for instaling OSS 10.2, I must to install with "install pci=nomsi" in the command line. Later I upgrade it to OSS 10.3 alpha 6, and it works without important problems (32 bit version). In the booth parameter uses But now I downloaded the kde x86-64 iso, verified the checksum, it was ok, and it will not install on my SB600 / RD580 based motherboard. I must boot in with the parameter "pci=nomsi" in 10.3 alpha 6, I triyed to remove it, and the system do'nt loads. I tryed with safe settings, acpi off, and with "install pci=nomsi", but the ahci module will not load. The bios is setted to "Native IDE", but it was the same in 10.2 and 10.3 alpha 6 if it was setted to "ahci". Other detail, after the upgrade to 10.3 alpha 6, I changed the dvd burner from a Asus ATAPI, to a LITE-ON DVDRW LH-20A1H (20x burning dvds), and I must to change the driver from the ide-generic to pata_atiixp, to lograte that it works with k3b. In the installation proces the system stops for about 2 minutes trying to load de ahci driver module (in 10.2 32 bits I got the same problem without the "install pci=nomsi" in the command line), but this option will not work now in 10.3 beta1 X86-64. Now the loaded modules for the disk controllers with 10.3 alpha 6 32 bits are: pata_atiixp 11904 0 ahci 25348 4 libata 120396 2 pata_atiixp,ahci scsi_mod 140248 5 usb_storage,sr_mod,sg,sd_mod,libata -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

Reply

Sign in to reply online Use email software

Show replies by date

bugzilla_noreply＠novell.com

11 Aug 11 Aug

13:27

New subject: [Bug 299575] Opensuse 10.3 beta1 X86-64 will not install on SB600 / RD580 based motherboard - ahci module will not load

https://bugzilla.novell.com/show_bug.cgi?id=299575 Juan Erbes changed: What |Removed |Added ---------------------------------------------------------------------------- Severity|Normal |Blocker Priority|P5 - None |P2 - High -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

Reply

Sign in to reply online Use email software

bugzilla_noreply＠novell.com

16:00

New subject: [Bug 299575] Opensuse 10.3 beta1 X86-64 will not install on SB600 / RD580 based motherboard - ahci module will not load

https://bugzilla.novell.com/show_bug.cgi?id=299575 Andreas Jaeger changed: What |Removed |Added ---------------------------------------------------------------------------- AssignedTo|bnc-team- |kernel-maintainers@forge.provo.novell.com |screening@forge.provo.novell| |.com | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

Reply

Sign in to reply online Use email software

bugzilla_noreply＠novell.com

14 Aug 14 Aug

05:19

New subject: [Bug 299575] Opensuse 10.3 beta1 X86-64 will not install on SB600 / RD580 based motherboard - ahci module will not load

https://bugzilla.novell.com/show_bug.cgi?id=299575#c1 Tejun Heo changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |RESOLVED Resolution| |DUPLICATE --- Comment #1 from Tejun Heo 2007-08-13 23:19:27 MST --- Please post the result of 'lspci -nn' in bug 299010. Thanks. *** This bug has been marked as a duplicate of bug 299010 *** https://bugzilla.novell.com/show_bug.cgi?id=299010 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

Reply

Sign in to reply online Use email software

bugzilla_noreply＠novell.com

16 Aug 16 Aug

22:56

New subject: [Bug 299575] Opensuse 10.3 beta1 X86-64 will not install on SB600 / RD580 based motherboard - ahci module will not load

https://bugzilla.novell.com/show_bug.cgi?id=299575#c2 Juan Erbes changed: What |Removed |Added ---------------------------------------------------------------------------- Resolution|DUPLICATE |REMIND --- Comment #2 from Juan Erbes 2007-08-16 16:56:09 MST --- The new kernel kernel-default-2.6.22.2-20070814064043 (32 bits) will not work without the pci=nomsi as boot parameter. If the new kernel where ok, it must booting without the pci=nomsiparameter. The 64 bits version of the kernel I could'nt test it because I do'nt have a install cd with the new kernel. The result of 'lspci -nn': 00:00.0 Host bridge [Class 0600]: ATI Technologies Inc RD580 [CrossFire Xpress 3200] Chipset Host Bridge [1002:5952] 00:02.0 PCI bridge [Class 0604]: ATI Technologies Inc RS480 PCI-X Root Port [1002:5a34] 00:06.0 PCI bridge [Class 0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a38] 00:12.0 SATA controller [Class 0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] 00:13.0 USB Controller [Class 0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] 00:13.1 USB Controller [Class 0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] 00:13.2 USB Controller [Class 0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] 00:13.3 USB Controller [Class 0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] 00:13.4 USB Controller [Class 0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] 00:13.5 USB Controller [Class 0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] 00:14.0 SMBus [Class 0c05]: ATI Technologies Inc SB600 SMBus [1002:4385] (rev 13) 00:14.1 IDE interface [Class 0101]: ATI Technologies Inc SB600 IDE [1002:438c] 00:14.2 Audio device [Class 0403]: ATI Technologies Inc SB600 Azalia [1002:4383] 00:14.3 ISA bridge [Class 0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d] 00:14.4 PCI bridge [Class 0604]: ATI Technologies Inc SB600 PCI to PCI Bridge [1002:4384] 00:18.0 Host bridge [Class 0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] 00:18.1 Host bridge [Class 0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] 00:18.2 Host bridge [Class 0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] 00:18.3 Host bridge [Class 0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] 01:00.0 VGA compatible controller [Class 0300]: ATI Technologies Inc RV515 PRO [Radeon X1300/X1550 Series] [1002:7142] 01:00.1 Display controller [Class 0380]: ATI Technologies Inc RV515 PRO [Radeon X1300/X1550 Series] (Secondary) [1002:7162] 03:01.0 Multimedia video controller [Class 0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 11) 03:01.1 Multimedia controller [Class 0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 11) 03:02.0 FireWire (IEEE 1394) [Class 0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev c0) 03:03.0 Ethernet controller [Class 0200]: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet [10ec:8167] (rev 10) The result of lspci -vvvvnn: 00:00.0 Host bridge [Class 0600]: ATI Technologies Inc RD580 [CrossFire Xpress 3200] Chipset Host Bridge [1002:5952] Subsystem: ATI Technologies Inc RD580 [CrossFire Xpress 3200] Chipset Host Bridge [1002:5952] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- TAbort- Reset- FastB2B- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x16 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 2, PowerLimit 75.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd Off, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [b0] Subsystem: ATI Technologies Inc Unknown device [1002:5952] Capabilities: [b8] HyperTransport: MSI Mapping 00:06.0 PCI bridge [Class 0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a38] (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- TAbort- Reset- FastB2B- Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+ Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 247 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 6, PowerLimit 25.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd Off, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [b0] Subsystem: ATI Technologies Inc Unknown device [1002:5952] Capabilities: [b8] HyperTransport: MSI Mapping 00:12.0 SATA controller [Class 0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0]) Subsystem: Micro-Star International Co., Ltd. Unknown device [1462:7242] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- TAbort- TAbort- TAbort- TAbort- TAbort- TAbort- TAbort- TAbort- TAbort- TAbort- TAbort- TAbort- Reset- FastB2B- 00:18.0 Host bridge [Class 0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- TAbort- TAbort- TAbort- TAbort- TAbort- TAbort- TAbort- TAbort- TAbort- https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

Reply

Sign in to reply online Use email software

bugzilla_noreply＠novell.com

23:53

New subject: [Bug 299575] Opensuse 10.3 beta1 X86-64 will not install on SB600 / RD580 based motherboard - ahci module will not load

https://bugzilla.novell.com/show_bug.cgi?id=299575#c3 Juan Erbes changed: What |Removed |Added ---------------------------------------------------------------------------- Status|RESOLVED |REOPENED Resolution|REMIND | --- Comment #3 from Juan Erbes 2007-08-16 17:53:44 MST --- The sata driver of the chipset ATI sb600 from my mobo, appear as Si3112.sys in the drivers disk. The raid driver appear as Si3112r.sys. The linux version of this driver, is included in the ahci driver? As i see, i mean it must be sata_sil, or sata_sil24: http://article.gmane.org/gmane.linux.ide/11570 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

Reply

Sign in to reply online Use email software

bugzilla_noreply＠novell.com

17 Aug 17 Aug

17:55

New subject: [Bug 299575] Opensuse 10.3 beta1 X86-64 will not install on SB600 / RD580 based motherboard - ahci module will not load

https://bugzilla.novell.com/show_bug.cgi?id=299575#c4 Tejun Heo changed: What |Removed |Added ---------------------------------------------------------------------------- Status|REOPENED |ASSIGNED --- Comment #4 from Tejun Heo 2007-08-17 11:55:11 MST --- Alright, RD580 added to MSI blacklist. Will forward patch mainline too. Please test beta2 when it comes out and re-open if the problem persists. Your mobo doesn't have a sil controller. The driver is pata_atiixp. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

Reply

Sign in to reply online Use email software

bugzilla_noreply＠novell.com

18 Aug 18 Aug

14:35

New subject: [Bug 299575] Opensuse 10.3 beta1 X86-64 will not install on SB600 / RD580 based motherboard - ahci module will not load

https://bugzilla.novell.com/show_bug.cgi?id=299575#c5 --- Comment #5 from Juan Erbes 2007-08-18 08:35:18 MST --- Yes the driver for the new ide/atapi drives is pata_atiixp. For the old ide drives I could use the ide-generic driver, but with the new drives, i must use pata_atiixp module driver. For a dvd burner Asus ATAPI I used ide-generic, and for a LITE-ON DVDRW LH-20A1H (20x burning dvds), and I must to change the driver from the ide-generic to pata_atiixp, to lograte that it works with k3b. For the sata drives the driver appear as ahci in linux. I tryed to load the sata_sil module via modprobe, and it loads without errors. In the windows driver disk of the mobo MSI K9A PLATINUM (SB600 / RD580) chipset, appear Si3112.sys. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

Reply

Sign in to reply online Use email software

bugzilla_noreply＠novell.com

20 Aug 20 Aug

11:28

New subject: [Bug 299575] Opensuse 10.3 beta1 X86-64 will not install on SB600 / RD580 based motherboard - ahci module will not load

https://bugzilla.novell.com/show_bug.cgi?id=299575 Tejun Heo changed: What |Removed |Added ---------------------------------------------------------------------------- Depends on|246701 | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

Reply

Sign in to reply online Use email software

bugzilla_noreply＠novell.com

11:29

New subject: [Bug 299575] Opensuse 10.3 beta1 X86-64 will not install on SB600 / RD580 based motherboard - ahci module will not load

https://bugzilla.novell.com/show_bug.cgi?id=299575#c6 Tejun Heo changed: What |Removed |Added ---------------------------------------------------------------------------- Depends on| |246701 Status|ASSIGNED |RESOLVED Resolution| |FIXED --- Comment #6 from Tejun Heo 2007-08-20 05:29:02 MST --- Resolving as FIXED. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

Reply

Sign in to reply online Use email software

bugzilla_noreply＠novell.com

11:29

New subject: [Bug 299575] Opensuse 10.3 beta1 X86-64 will not install on SB600 / RD580 based motherboard - ahci module will not load

https://bugzilla.novell.com/show_bug.cgi?id=299575 Tejun Heo changed: What |Removed |Added ---------------------------------------------------------------------------- Depends on|246701 | -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

Reply

Sign in to reply online Use email software

bugzilla_noreply＠novell.com

10 Sep 10 Sep

22:38

New subject: [Bug 299575] Opensuse 10.3 beta1 X86-64 will not install on SB600 / RD580 based motherboard - ahci module will not load

https://bugzilla.novell.com/show_bug.cgi?id=299575#c7 Juan Erbes changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |jerbes@gmail.com Status|RESOLVED |REOPENED Resolution|FIXED | --- Comment #7 from Juan Erbes 2007-09-10 16:38:52 MST --- After upgrading to beta 3, and rebooting, the system has entered in a fsck, and could not complete it. I must run it by hand, to resolve the problem, aparently caused by a buggy ahci driver. In dmesg I obtain: dmesg | grep ahci ahci 0000:00:12.0: version 3.0 ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:12.0: flags: ncq sntf ilck led clo pio slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci The system hasother problems, such as the rpmdb crases (Bug #309354), and the crashes of some aplications such as audacity or amule, when it try to write to the hard disk (reopened Bug 294693). -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

Reply

Sign in to reply online Use email software

bugzilla_noreply＠novell.com

11 Sep 11 Sep

06:08

New subject: [Bug 299575] Opensuse 10.3 beta1 X86-64 will not install on SB600 / RD580 based motherboard - ahci module will not load

https://bugzilla.novell.com/show_bug.cgi?id=299575#c8 Stephan Kulow changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |coolo@novell.com Status|REOPENED |RESOLVED Resolution| |FIXED --- Comment #8 from Stephan Kulow 2007-09-11 00:08:44 MST --- I don't think you should hijack that bug -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

Reply

Sign in to reply online Use email software

bugzilla_noreply＠novell.com

14 Sep 14 Sep

14:47

New subject: [Bug 299575] Opensuse 10.3 beta1 X86-64 will not install on SB600 / RD580 based motherboard - ahci module will not load

https://bugzilla.novell.com/show_bug.cgi?id=299575#c9 --- Comment #9 from Tejun Heo 2007-09-14 08:47:03 MST --- Juan, you need to open a separate bug report and we need more detail to determine what's going on. Those two messages are reporting that the driver is working around known problems and with those quirks applied it should work. Please open a separate bug report with more info (it would be great if you can retry it and see whether the problem is reproducible) and cc me. Thanks. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.

Reply

Sign in to reply online Use email software

6075

Age (days ago)

6109

Last active (days ago)

Download

13 comments

1 participants

tags

participants (1)

bugzilla_noreply＠novell.com