And ********* The updated DBus daemon now logs access violations via syslog. If you see log entries about rejected messages of type "method_call" during normal operation the application that caused it likely needs an updated DBus policy. Please contact the application vendor in this case. *********** (SUSE Security Announcement: dbus-1 (SUSE-SA:2009:013) 2009/3/18 Rajko M. :

On Tuesday 17 March 2009 09:29:07 pm Jeffrey L. Taylor wrote:

...

After the d-bus updates I started getting the following errors: ... I think all related packages are stock SuSE 10.3.  Any suggestions?

It seems related to comment in dbus security update .

*************** dbus-1 - dbus security update

The dbus package used a too permissive configuration. Therefore intended access control for some services was not applied (CVE-2008-4311). The new configuration denies access by default. Some dbus services may break due to this setting and need an updated configuration as well. References: 443307 (bugzilla) : bug number 443307 ***************

It seems time to file bug report.

-- Regards, Rajko -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

On Wed, Mar 18, 2009 at 03:51:54AM -0500, David C. Rankin wrote:

Jeffrey L. Taylor wrote:

...

After the d-bus updates I started getting the following errors:

Mar 17 21:21:13 odysseus powersaved[3302]: WARNING (sendMethodCallWithReturn:483) Could not send method call to D-BUS system bus: Rejected send message, 1 matched rules; type="method_call", sender=":1.14" (uid=0 pid=3302 comm="/usr/sbin/powersaved -d -f /var/run/acpid.socket -") interface="org.freedesktop.Hal.Device.CPUFreq" member="GetCPUFreqGovernor" error name="(unset)" requested_reply=0 destination="org.freedesktop.Hal" (uid=0 pid=2351 comm="/usr/sbin/hald --daemon=yes ")) Mar 17 21:21:13 odysseus powersaved[3302]: ERROR (sendMethodCallAndBlock:448) Could not send method call: Rejected send message, 1 matched rules; type="method_call", sender=":1.14" (uid=0 pid=3302 comm="/usr/sbin/powersaved -d -f /var/run/acpid.socket -") interface="org.freedesktop.Hal.Device.CPUFreq" member="SetCPUFreqGovernor" error name="(unset)" requested_reply=0 destination="org.freedesktop.Hal" (uid=0 pid=2351 comm="/usr/sbin/hald --daemon=yes ")) Mar 17 21:21:13 odysseus powersaved[3302]: ERROR (setModes:158) Could not set governor 'ondemand' Mar 17 21:21:13 odysseus powersaved[3302]: WARNING (setModes:161) Kernel ondemand governor not working, trying userspace instead Mar 17 21:21:13 odysseus powersaved[3302]: ERROR (sendMethodCallAndBlock:448) Could not send method call: Rejected send message, 1 matched rules; type="method_call", sender=":1.14" (uid=0 pid=3302 comm="/usr/sbin/powersaved -d -f /var/run/acpid.socket -") interface="org.freedesktop.Hal.Device.CPUFreq" member="SetCPUFreqGovernor" error name="(unset)" requested_reply=0 destination="org.freedesktop.Hal" (uid=0 pid=2351 comm="/usr/sbin/hald --daemon=yes ")) Mar 17 21:21:13 odysseus powersaved[3302]: ERROR (setModes:164) Neither ondemand nor userspace governor working Mar 17 21:25:01 odysseus kernel: martian source 255.255.255.255 from 192.168.0.174, on dev wlan

I think all related packages are stock SuSE 10.3. Any suggestions?

TIA, Jeffrey

We are working on those, the powersave fix is released now, another fixed hal will be released today.

I should have perused the list before updating :(

Mar 18 03:46:09 nirvana syslog-ng[23379]: last message repeated 19 times Mar 18 03:46:10 nirvana console-kit-daemon[2488]: WARNING: Couldn't connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: Connection refused

This looks like your system dbus-server crashed/is not running. rcdbus restart CIao, Marcus -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

Quoting Marcus Meissner :

On Wed, Mar 18, 2009 at 03:51:54AM -0500, David C. Rankin wrote:

...

Jeffrey L. Taylor wrote:

...

After the d-bus updates I started getting the following errors:

Mar 17 21:21:13 odysseus powersaved[3302]: WARNING (sendMethodCallWithReturn:483) Could not send method call to D-BUS system bus: Rejected send message, 1 matched rules; type="method_call", sender=":1.14" (uid=0 pid=3302 comm="/usr/sbin/powersaved -d -f /var/run/acpid.socket -") interface="org.freedesktop.Hal.Device.CPUFreq" member="GetCPUFreqGovernor" error name="(unset)" requested_reply=0 destination="org.freedesktop.Hal" (uid=0 pid=2351 comm="/usr/sbin/hald --daemon=yes ")) [snip]

I think all related packages are stock SuSE 10.3. Any suggestions?

TIA, Jeffrey

We are working on those, the powersave fix is released now, another fixed hal will be released today.

The update fixes my problems. Thank you, Jeffrey -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

Jeffrey L. Taylor wrote:

Quoting David C. Rankin :

...

Jeffrey L. Taylor wrote:

...

After the d-bus updates I started getting the following errors:

Mar 17 21:21:13 odysseus powersaved[3302]: WARNING (sendMethodCallWithReturn:483) Could not send method call to D-BUS system bus: Rejected send message, 1 matched rules; type="method_call", sender=":1.14" (uid=0 pid=3302 comm="/usr/sbin/powersaved -d -f /var/run/acpid.socket -") interface="org.freedesktop.Hal.Device.CPUFreq" member="GetCPUFreqGovernor" error name="(unset)" requested_reply=0 destination="org.freedesktop.Hal" (uid=0 pid=2351 comm="/usr/sbin/hald --daemon=yes ")) [snip] I think all related packages are stock SuSE 10.3. Any suggestions?

TIA, Jeffrey WTF???

I should have perused the list before updating :(

Mar 18 03:46:09 nirvana syslog-ng[23379]: last message repeated 19 times Mar 18 03:46:10 nirvana console-kit-daemon[2488]: WARNING: Couldn't connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: Connection refused [snip] Jeffrey, did you file a bug report? If so what's the number so I can add comments. (I know I could search, but what are friends for...)

I encountered this problem also. Solved by rebooting.

HTH, Jeffrey

What?? Now we have to 'reboot' after updates? Where have I heard that before? After 24 hours of: Mar 18 17:39:43 bonza console-kit-daemon[2294]: WARNING: Couldn't connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: Connection refused Mar 18 17:40:01 bonza syslog-ng[25812]: last message repeated 6 times Mar 18 17:40:01 bonza /usr/sbin/cron[20382]: (assistance) CMD (/usr/local/bin/Learn_as_spam_cron) Mar 18 17:40:04 bonza console-kit-daemon[2294]: WARNING: Couldn't connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: Connection refused Mar 18 17:40:23 bonza syslog-ng[25812]: last message repeated 6 times Mar 18 17:40:25 bonza console-kit-daemon[2294]: WARNING: Couldn't connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: Connection refused Mar 18 17:41:23 bonza syslog-ng[25812]: last message repeated 19 times Mar 18 17:41:25 bonza console-kit-daemon[2294]: WARNING: Couldn't connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: Connection refused Mar 18 17:42:23 bonza syslog-ng[25812]: last message repeated 19 times I rebooted -- it worked. -- David C. Rankin, J.D.,P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Wednesday, 2009-03-18 at 18:19 -0500, David C. Rankin wrote:

...

I encountered this problem also. Solved by rebooting.

What?? Now we have to 'reboot' after updates? Where have I heard that before?

It is documented in the oficial announcement: ]3) Special Instructions and Notes ] ] The new DBus policy is applied immediately to new connections so it ] is advisable to apply the update for the affected packages in the ] same update run as DBus. ] ] To enable the syslog code the dbus-daemon needs to be restarted. ] Doing so in the running system is not recommended so please reboot ] the system after applying all updates. - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (GNU/Linux) iEYEARECAAYFAknC51wACgkQtTMYHG2NR9UwtQCeOGGsjM/oFtoOy1zkLAARfM5J 6EoAoI8JQzmMMmsrp8tBtfSuWYn6I98/ =8hIo -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Friday, 2009-03-20 at 01:44 -0500, David C. Rankin wrote:

Carlos E. R. wrote:

...

On Wednesday, 2009-03-18 at 18:19 -0500, David C. Rankin wrote:

...

...

I encountered this problem also. Solved by rebooting.

What?? Now we have to 'reboot' after updates? Where have I heard that before?

It is documented in the oficial announcement:

]3) Special Instructions and Notes ] ] The new DBus policy is applied immediately to new connections so it ] is advisable to apply the update for the affected packages in the ] same update run as DBus. ] ] To enable the syslog code the dbus-daemon needs to be restarted. ] Doing so in the running system is not recommended so please reboot ] the system after applying all updates.

I should have included the smiley ';-)' after the question mark....

:-) I did the update yesterday, and I was surprised that neither yast nor zypper mention a needed reboot. More people may bump into your situation. By the way, the command I posted gives interesting results: nimrodel:~ # lsof | grep -E 'RPMDELETE|;|path inode=' lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/cer/.gvfs Output information may be incomplete. cupsd 3155 root mem REG 22,70 1349661 /lib/libdbus-1.so.3.4.0 (path inode=1349660) login 3879 root mem REG 22,70 1349661 /lib/libdbus-1.so.3.4.0 (path inode=1349660) login 3879 root mem REG 3,18 363885 /usr/lib/libck-connector.so.0.0.0 (path inode=360933) login 3879 root mem REG 22,70 1382415 /lib/security/pam_ck_connector.so (path inode=1381810) login 3881 root mem REG 22,70 1349661 /lib/libdbus-1.so.3.4.0 (path inode=1349660) ... login 3889 root mem REG 22,70 1382415 /lib/security/pam_ck_connector.so (path inode=1381810) gdm 8877 root mem REG 22,70 1349661 /lib/libdbus-1.so.3.4.0 (path inode=1349660) gnome-ses 9837 cer mem REG 22,70 1349661 /lib/libdbus-1.so.3.4.0 (path inode=1349660) ... and much more. It does indeed need a reboot. - -- Cheers, Carlos E. R. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (GNU/Linux) iEUEARECAAYFAknDmkIACgkQtTMYHG2NR9VnFQCY5D0olGkpkBAwkHDF7KTO1ipB kwCglkB6Hoc/4kJARx9rl7IX5C6UK28= =ehl1 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org