I've been through yast2 to try to install this scanner However, I don't think I've selected the correct USB device. Can anyone help with determining the correct usb hub and removing my erroneous scanner definition? YAST2 reports the following in Hardware info +usb +USB UHCI Root Hub | |-Class : Hub | |-Vendor : VIA Technologies, Inc. +NT1003 Frame Grabber | |-Class : Unclassified device | |-Vendor : Nogatech Ltd. +USB UHCI Root Hub | |-Class : Hub +Generic USB Hub | |-Class : Hub | |-Vendor : Alcor Micro, Inc. +usbctrl +USB UHCI +USB UHCI -- Twist it, stomp it, bounce it, shake it 'Cos you know the vibe is what you make it
From bartydeux@gminformatique.com Sun Sep 8 07:16:20 2002
Return-Path:
I've been through yast2 to try to install this scanner However, I don't think I've selected the correct USB device. Can anyone help with determining the correct usb hub and removing my erroneous scanner definition?
YAST2 reports the following in Hardware info
+usb +USB UHCI Root Hub
| |-Class : Hub | |-Vendor : VIA Technologies, Inc.
+NT1003 Frame Grabber
| |-Class : Unclassified device | |-Vendor : Nogatech Ltd.
+USB UHCI Root Hub
| |-Class : Hub
+Generic USB Hub
| |-Class : Hub | |-Vendor : Alcor Micro, Inc.
+usbctrl +USB UHCI +USB UHCI
-- Twist it, stomp it, bounce it, shake it 'Cos you know the vibe is what you make it
Hello, I don't know how it works with Yast2 I suppose that there is a Sane driver available for the HP Scanjet 4300C and that Sane is installed. I can read that the Usb driver are normally installed. Scanjet 4300C does seem to be fully supported and there is no driver furnished by Sane but somebody managed to have it work Look at: http://home.kabelfoon.nl/~bertrik/hp3300c/hp3300c.html and the Sane Web page: http://www.buzzard.org.uk/jonathan/scanner-usb.html Did you find the vendor and product number of your scanner with: host:> less /proc/bus/usb/devices My scanner is a HP Scanjet 6200C with vendor number : 03f0 and product number : 0201. I just type: host:> modprobe scanner vendor=0x3f0 product=0x201 and it works. Good luck. I have a Canoscan N450U too with no available drivers made by Sane but somebody made an experimental backend driver and it works with the help of a Bash script. Alain -- Qui fut le plus à plaindre: Cassandre que personne n'écouta ou ceux qui n'écoutaient pas Cassandre ====== Who was more to be pitied Cassandra whom nobody listened to or those who were not listening to Cassandra -- Alain Barthélemy bartydeux@gminformatique.com cassandre@gminformatique.com Voyez mon site web sur: http://bartydeux.gminformatique.com Ma généalogie et la petite histoire de Herve et sa région -------------------------------------------------------
On Saturday 07 September 2002 16:08 pm, Sylvanus A. Currie wrote:
I've been through yast2 to try to install this scanner However, I don't think I've selected the correct USB device. Can anyone help with determining the correct usb hub and removing my erroneous scanner definition?
YAST2 reports the following in Hardware info
+usb +USB UHCI Root Hub
| |-Class : Hub | |-Vendor : VIA Technologies, Inc.
+NT1003 Frame Grabber
| |-Class : Unclassified device | |-Vendor : Nogatech Ltd.
+USB UHCI Root Hub
| |-Class : Hub
+Generic USB Hub
| |-Class : Hub | |-Vendor : Alcor Micro, Inc.
+usbctrl +USB UHCI +USB UHCI
I have listed my usb devices below: sylvanus@linux:~> cat /proc/bus/usb/devices T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 11/900 us ( 1%), #Int= 1, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=d000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=058f ProdID=9254 Rev= 1.00 S: Manufacturer=ALCOR S: Product=Generic USB Hub C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=d400 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0573 ProdID=4d02 Rev= 1.00 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none) E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms E: Ad=82(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 0 Alt= 1 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none) E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms E: Ad=82(I) Atr=01(Isoc) MxPS= 959 Ivl=1ms I: If#= 0 Alt= 2 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none) E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms E: Ad=82(I) Atr=01(Isoc) MxPS= 895 Ivl=1ms I: If#= 0 Alt= 3 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none) E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms E: Ad=82(I) Atr=01(Isoc) MxPS= 831 Ivl=1ms I: If#= 0 Alt= 4 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none) E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms E: Ad=82(I) Atr=01(Isoc) MxPS= 767 Ivl=1ms I: If#= 0 Alt= 5 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none) E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms E: Ad=82(I) Atr=01(Isoc) MxPS= 703 Ivl=1ms I: If#= 0 Alt= 6 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none) E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms E: Ad=82(I) Atr=01(Isoc) MxPS= 639 Ivl=1ms I: If#= 0 Alt= 7 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none) E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms E: Ad=82(I) Atr=01(Isoc) MxPS= 575 Ivl=1ms I: If#= 0 Alt= 8 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none) E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms E: Ad=82(I) Atr=01(Isoc) MxPS= 511 Ivl=1ms I: If#= 0 Alt= 9 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none) E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms E: Ad=82(I) Atr=01(Isoc) MxPS= 447 Ivl=1ms I: If#= 0 Alt=10 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none) E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms E: Ad=82(I) Atr=01(Isoc) MxPS= 383 Ivl=1ms I: If#= 0 Alt=11 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none) E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms E: Ad=82(I) Atr=01(Isoc) MxPS= 319 Ivl=1ms I: If#= 0 Alt=12 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none) E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms E: Ad=82(I) Atr=01(Isoc) MxPS= 255 Ivl=1ms I: If#= 0 Alt=13 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none) E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms E: Ad=82(I) Atr=01(Isoc) MxPS= 191 Ivl=1ms I: If#= 0 Alt=14 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none) E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms E: Ad=82(I) Atr=01(Isoc) MxPS= 127 Ivl=1ms I: If#= 0 Alt=15 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none) E: Ad=01(B) Atr=00(Ctrl) MxPS= 8 Ivl=0ms E: Ad=82(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms sylvanus@linux:~> -- Twist it, stomp it, bounce it, shake it 'Cos you know the vibe is what you make it
participants (1)
-
Sylvanus A. Currie