Hi everybody. Has anyone managed to successfully build the latest MPlayer tarball on SuSE9.0? My builds fail complaining that it can't find GTK, even though all the GTK libs are installed. -- JAY VOLLMER JVOLLMER@CONSOLIDATEDLINT.COM TEXT REFS DOUBLEPLUSUNGOOD SELFTHINK VERGING CRIMETHINK IGNORE FULLWISE
My builds fail complaining that it can't find GTK, even though all the GTK libs are installed.
Do you have gtk-devel installed? -- James Ogley, Webmaster, Rubber Turnip james@rubberturnip.org.uk http://www.rubberturnip.org.uk Jabber: riggwelter@myjabber.net Using Free Software since 1994, running GNU/Linux (SuSE 9.0) GNOME updates for SuSE: http://www.usr-local-bin.org
On Friday 14 November 2003 05:59, James Ogley wrote:
My builds fail complaining that it can't find GTK, even though all the GTK libs are installed.
Do you have gtk-devel installed?
Yes I do. As you can see: [jvollmer@samneric:~]$ rpm -qa|grep gtk libgtkhtml-2.2.4-110 gtkam-0.1.11dev1-82 gtk2-themes-0.1-494 gtk-1.2.10-710 gtklp-0.9p-30 libexif-gtk-0.3.3-172 gtk-devel-1.2.10-710 gtk2-devel-2.2.3-27 gtkhtml2-3.0.8-60 gtkmm-1.2.10-143 gtk2-engines-2.2.0-220 gtk2-2.2.3-27 -- JAY VOLLMER JVOLLMER@CONSOLIDATEDLINT.COM TEXT REFS DOUBLEPLUSUNGOOD SELFTHINK VERGING CRIMETHINK IGNORE FULLWISE
Do you have gtk-devel installed? Yes I do. As you can see:
Then, can you paste the specific error the build exits with? -- James Ogley, Webmaster, Rubber Turnip james@rubberturnip.org.uk http://www.rubberturnip.org.uk Jabber: riggwelter@myjabber.net Using Free Software since 1994, running GNU/Linux (SuSE 9.0) GNOME updates for SuSE: http://www.usr-local-bin.org
On Friday 14 November 2003 06:44, James Ogley wrote:
Do you have gtk-devel installed?
Yes I do. As you can see:
Then, can you paste the specific error the build exits with? Actually, it fails on the configure. Using the line, "./configure --enable-gui," I get the following error:
Checking for FLAC support ... yes (using internal libmpflac) yes Checking for inet6 ... yes Checking for gethostbyname2 ... yes Checking for GUI ... yes Checking for XShape extension ... yes Checking for gtk version ... Error: the GUI requires GTK (which was not found) Last line of configure.log is: ============ Checking for gtk version ============
-- James Ogley, Webmaster, Rubber Turnip james@rubberturnip.org.uk http://www.rubberturnip.org.uk Jabber: riggwelter@myjabber.net Using Free Software since 1994, running GNU/Linux (SuSE 9.0) GNOME updates for SuSE: http://www.usr-local-bin.org
-- JAY VOLLMER JVOLLMER@CONSOLIDATEDLINT.COM TEXT REFS DOUBLEPLUSUNGOOD SELFTHINK VERGING CRIMETHINK IGNORE FULLWISE
Jay Vollmer wrote:
On Friday 14 November 2003 06:44, James Ogley wrote:
Do you have gtk-devel installed?
Yes I do. As you can see:
Then, can you paste the specific error the build exits with?
Actually, it fails on the configure. Using the line, "./configure --enable-gui," I get the following error:
Checking for FLAC support ... yes (using internal libmpflac) yes Checking for inet6 ... yes Checking for gethostbyname2 ... yes Checking for GUI ... yes Checking for XShape extension ... yes Checking for gtk version ... Error: the GUI requires GTK (which was not found)
Last line of configure.log is:
============ Checking for gtk version ============
-- James Ogley, Webmaster, Rubber Turnip james@rubberturnip.org.uk http://www.rubberturnip.org.uk Jabber: riggwelter@myjabber.net Using Free Software since 1994, running GNU/Linux (SuSE 9.0) GNOME updates for SuSE: http://www.usr-local-bin.org
I had the same problem, it is because GTK (and GLIB) are in non-standard directories. Use the following line: ./configure --enable-gui --with-gtk-config=/opt/gnome/bin/gtk-config --with-glib-config=/opt/gnome/bin/glib-config it worked on my system, although I get an error about subfont.ttf on startup. I haven't tried to play anything yet. I just found rpms for SuSE 9 at: http://packman.links2linux.de/?action=128 just finished downloading them, I'll let you know how they work. -- Hugh mailto: hrtlist@cpia.jhu.edu
Hugh Taylor wrote:
Jay Vollmer wrote:
On Friday 14 November 2003 06:44, James Ogley wrote:
Do you have gtk-devel installed?
Yes I do. As you can see:
Then, can you paste the specific error the build exits with?
Actually, it fails on the configure. Using the line, "./configure --enable-gui," I get the following error:
Checking for FLAC support ... yes (using internal libmpflac) yes Checking for inet6 ... yes Checking for gethostbyname2 ... yes Checking for GUI ... yes Checking for XShape extension ... yes Checking for gtk version ... Error: the GUI requires GTK (which was not found)
Last line of configure.log is:
============ Checking for gtk version ============
-- James Ogley, Webmaster, Rubber Turnip james@rubberturnip.org.uk http://www.rubberturnip.org.uk Jabber: riggwelter@myjabber.net Using Free Software since 1994, running GNU/Linux (SuSE 9.0) GNOME updates for SuSE: http://www.usr-local-bin.org
I had the same problem, it is because GTK (and GLIB) are in non-standard directories. Use the following line:
./configure --enable-gui --with-gtk-config=/opt/gnome/bin/gtk-config --with-glib-config=/opt/gnome/bin/glib-config
it worked on my system, although I get an error about subfont.ttf on startup. I haven't tried to play anything yet. I just found rpms for SuSE 9 at:
http://packman.links2linux.de/?action=128
just finished downloading them, I'll let you know how they work.
Good news! The rpms referenced above installed and ran. I did have to get lzo-1.06-1.i386.rpm for them to work. Tried running a DVD, it ran, but not smoothly (could be because I don't have XFree, using Xig Summit LX Platinum). Sound was very low, but that's been typical - hopefully I'll work on it this weekend. -- Hugh mailto: hrtlist@cpia.jhu.edu
On Friday 14 November 2003 17:37, Hugh Taylor wrote:
I had the same problem, it is because GTK (and GLIB) are in non-standard directories. Use the following line:
./configure --enable-gui --with-gtk-config=/opt/gnome/bin/gtk-config --with-glib-config=/opt/gnome/bin/glib-config
it worked on my system, although I get an error about subfont.ttf on startup.
Thanks Hugh - that worked. I got around the subfont.ttf error by making a symbolic link to /usr/X11R6/lib/X11/fonts/truetype/arial.ttf from $HOME/.mplayer/subfont.ttf -- JAY VOLLMER JVOLLMER@CONSOLIDATEDLINT.COM TEXT REFS DOUBLEPLUSUNGOOD SELFTHINK VERGING CRIMETHINK IGNORE FULLWISE
Jay Vollmer wrote:
On Friday 14 November 2003 17:37, Hugh Taylor wrote:
I had the same problem, it is because GTK (and GLIB) are in non-standard directories. Use the following line:
./configure --enable-gui --with-gtk-config=/opt/gnome/bin/gtk-config --with-glib-config=/opt/gnome/bin/glib-config
it worked on my system, although I get an error about subfont.ttf on startup.
Thanks Hugh - that worked. I got around the subfont.ttf error by making a symbolic link to /usr/X11R6/lib/X11/fonts/truetype/arial.ttf from $HOME/.mplayer/subfont.ttf
Glad it worked. I didn't think of doing the link to fix the subfont error, ended up using the rpms. Do you know of anyway to prevent the player from opening in the lower right corner (hidden by the menu bar), I had the same problem on my old Redhat system also. -- Hugh mailto: hrtlist@cpia.jhu.edu
Hugh Taylor wrote:
Jay Vollmer wrote:
On Friday 14 November 2003 17:37, Hugh Taylor wrote:
I had the same problem, it is because GTK (and GLIB) are in non-standard directories. Use the following line:
./configure --enable-gui --with-gtk-config=/opt/gnome/bin/gtk-config --with-glib-config=/opt/gnome/bin/glib-config
it worked on my system, although I get an error about subfont.ttf on startup.
Thanks Hugh - that worked. I got around the subfont.ttf error by making a symbolic link to /usr/X11R6/lib/X11/fonts/truetype/arial.ttf from $HOME/.mplayer/subfont.ttf
Glad it worked. I didn't think of doing the link to fix the subfont error, ended up using the rpms. Do you know of anyway to prevent the player from opening in the lower right corner (hidden by the menu bar), I had the same problem on my old Redhat system also.
I did not need to do a symbolic, just the fonts through the preferences menu. You can browse to the directory containing the fonts. Hope that helps - Stan
On Monday 17 November 2003 19:33, Stanley Keymer wrote:
Hugh Taylor wrote:
Jay Vollmer wrote:
On Friday 14 November 2003 17:37, Hugh Taylor wrote:
I had the same problem, it is because GTK (and GLIB) are in non-standard directories. Use the following line:
./configure --enable-gui --with-gtk-config=/opt/gnome/bin/gtk-config --with-glib-config=/opt/gnome/bin/glib-config
it worked on my system, although I get an error about subfont.ttf on startup.
Thanks Hugh - that worked. I got around the subfont.ttf error by making a symbolic link to /usr/X11R6/lib/X11/fonts/truetype/arial.ttf from $HOME/.mplayer/subfont.ttf
Glad it worked. I didn't think of doing the link to fix the subfont error, ended up using the rpms. Do you know of anyway to prevent the player from opening in the lower right corner (hidden by the menu bar), I had the same problem on my old Redhat system also.
I did not need to do a symbolic, just the fonts through the preferences menu. You can browse to the directory containing the fonts.
Hope that helps
- Stan
Or... you could read the documentation for MPlayer... which tells you: 1. Download a font pack from the MPlayer site 2. Uncompress the font pack which will give you 4 directories... one for each of 4 font point sizes. 3. Copy the contents of one of the 4 diectories to $HOME/.mplayer/font That's all you have to do... none of the messing about with symlinking etc....just read the docs... it is in there.. albeit buried a bit deeply. C.
On Monday 17 November 2003 12:55, Clayton wrote:
Or... you could read the documentation for MPlayer... which tells you: 1. Download a font pack from the MPlayer site 2. Uncompress the font pack which will give you 4 directories... one for each of 4 font point sizes. 3. Copy the contents of one of the 4 diectories to $HOME/.mplayer/font
That's all you have to do... none of the messing about with symlinking etc....just read the docs... it is in there.. albeit buried a bit deeply.
C. IIRC, it was the MPlayer docs that told me to use the symlink.
-- JAY VOLLMER JVOLLMER@CONSOLIDATEDLINT.COM TEXT REFS DOUBLEPLUSUNGOOD SELFTHINK VERGING CRIMETHINK IGNORE FULLWISE
In a previous message, Jay Vollmer
On Friday 14 November 2003 05:59, James Ogley wrote:
My builds fail complaining that it can't find GTK, even though all the GTK libs are installed.
Do you have gtk-devel installed?
Yes I do. As you can see:
You might well find that the error is actually to do with something like atk or orbit, not gtk - the errors can be deceptive. Can you post the error produced by the compilation (including the few items preceding it in the output)? John -- John Pettigrew Headstrong Games john@headstrong-games.co.uk Fun : Strategy : Price http://www.headstrong-games.co.uk/ Board games that won't break the bank Knossos: escape the ever-changing labyrinth before the Minotaur catches you!
I have this problem as well. I have a Toshiba Satallite with an Orinoco
Gold pcmcia card. Thing is, the card works fine with my Windows XP
partition, it's worked well with my distributions of Red Hat and
Mandrake and EVEN worked on Suse 8.2. I know it works because when it
didn't work with Suse 9, I blew away the linux partition and reloaded
Suse 8.2. Wireless came up and worked like a champ. So I dropped my Suse
9 cd in and reloaded that, immediately stopped working. Built in
Ethernet works great, rewrites the resolv.conf file and life is dandy.
But the minute I put that wireless card in, the only thing I get in is
an ip address, and the only thing in resolv.conf is my domain name.
So, if anyone from Suse is listening in, this isn't an isolated problem.
You've downgraded the wireless performance. Really hope someone comes
out with a fix that DOESN'T involve manually setting routes and manually
configuring the resolv.conf file. We never had to do it before,
shouldn't have to do it now.
Regards,
Aric Wilisch
knight@shadowrealms.cc
From: david stevenson
I've found a problem on my notebook (Compaq Armada M700, WL110 wireless) whereas the embedded nic will acquire the IP address & the nameserver info but the wireless will only obtain an IP address. This allows me to browse my home LAN (everything behind the router) but I cannot get out when only using my wireless nic.
Initially I thought I would have to set my gateway to my router's address (192.168.1.1) but I've found that doesn't make a difference. I've tried this at home (w/ a Linksys router). Even if I activate eht0
(embedded wired nic) first & get the nameserver info entered into resolv.conf then turn off eth0 I cannot get past a my router. Furthermore when I plug the ethernet back in and remove the wireless nic & restart the network service (/etc/rc.d/network restart) I still cannot get out. From that point I'm stuck with a reboot and letting the system come up without the wireless nic installed.
I guess the first question would be: Does anyone know why my wireless will not acquire the nameserver info whereas the embedded nic will?
Secondly, even once I enter the nameserver info manually, why will the wireless not hit the Internet?
I have my SSID & encryption set correctly or I wouldn't be getting even an ip address & the ability to browse the internal network. I've also tried turning the encryption off to rule that out but with no luck. Also as FYI I've not touched the firewall this time. I've went with the default install settings. Last time I did the install though I did go through and set everything at the easiest level.
If anyone can give me a direction to go (other than rtfm) I would really appreciate it. I've been a red hat user for about 3 years now and I've
really started to like how Suse is looking now. If I cannot solve this
problem them I'll be stuck going back to red hat. From what I've seen with Suse 9, I would like to stick with it instead.
Any ideas? You have not told us about your setup. I am guessing some form of broadband router connected by ethernet to a wireless access point, or directly to the PC. So when you ask the access point, via dhcp, for an IP you also get routing infomation. But when you ask the access point you get only an IP. If this is the problem then try reconfiguring the access point to pass DHCP though to the router. David
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
On Fri, 2003-11-14 at 08:23, Aric C. Wilisch wrote:
I have this problem as well. I have a Toshiba Satallite with an Orinoco Gold pcmcia card. Thing is, the card works fine with my Windows XP partition, it's worked well with my distributions of Red Hat and Mandrake and EVEN worked on Suse 8.2. I know it works because when it didn't work with Suse 9, I blew away the linux partition and reloaded Suse 8.2. Wireless came up and worked like a champ. So I dropped my Suse 9 cd in and reloaded that, immediately stopped working. Built in Ethernet works great, rewrites the resolv.conf file and life is dandy. But the minute I put that wireless card in, the only thing I get in is an ip address, and the only thing in resolv.conf is my domain name.
So, if anyone from Suse is listening in, this isn't an isolated problem. You've downgraded the wireless performance. Really hope someone comes out with a fix that DOESN'T involve manually setting routes and manually configuring the resolv.conf file. We never had to do it before, shouldn't have to do it now.
Regards, Aric Wilisch knight@shadowrealms.cc
Same problem here. I just came over to Suse 9 from Red Hat 9 this past week. So far I like everything about Suse except I can not use wireless at home :( I also am using the Orinoco Gold card. I see the same exact issues; I get an IP address but nothing in resolv.conf. Even when i hard code resolv.conf it still doesn't work. Once I wire up everything works great. I would really like to see this wireless issue fixed as well. I really don't want to go to Fedora if I can help it. Anyone who has used wireless before and then has to go back to a wire knows that is now fun. Anxiously looking forward to any input to a fix. -- ______ Vince Scimeca - Senior Technology Manager Jupitermedia Corp. vscimeca@jupitermedia.com ______
Gentlemen, Check a bit farther down the list archives -- within the last day or so. I recall that someone had worked around the problem by connecting to his network first by cable, then somehow copying the information from that version of resolv.conf to the version his wireless card looks at. I haven't tried it yet (still on the time clock) but it looks like an interesting approach. I'm a recent immigrant from RH, and I too had relatively painless wifi support there, only to have it crash and burn here...oh well... Pete -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Peter N. Spotts Science and technology correspondent | The Christian Science Monitor One Norway Street, Boston MA 02115 Office: 617-450-2449 | Office in Home: 508-520-3139 pspotts@alum.mit.edu | www.csmonitor.com | www.peterspotts.net ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
On Fri, 2003-11-14 at 09:39, Peter N. Spotts wrote:
Gentlemen,
Check a bit farther down the list archives -- within the last day or so. I recall that someone had worked around the problem by connecting to his network first by cable, then somehow copying the information from that version of resolv.conf to the version his wireless card looks at. I haven't tried it yet (still on the time clock) but it looks like an interesting approach. I'm a recent immigrant from RH, and I too had relatively painless wifi support there, only to have it crash and burn here...oh well...
Pete
Pete - I did see that posted yesterday I believe, and I tried it last night to no avail. In theory that work-around should work, but it didn't for me. Also in theory hard coding my resolv.conf should work as well and it didn't. I can go on without wifi for a bit while I assume this issue is being addressed, but in the long term if it is not solved it would force me to give Fedora a bit more of a look. I like what I see from Suse thus far and I am a bit surprised that wifi seems to be an issue when it is my understanding that it worked in past versions (I have Suse9). -- ______ Vince Scimeca - Senior Technology Manager Jupitermedia Corp. vscimeca@jupitermedia.com ______
I havn't seen that post, but I've read similar ones. Unless everytime after that it would always use the copied resolv.conf information whenever I connect to wireless, this really isn't that useful. What's the point of having a wireless network if the only way you can make it work is to connect to ethernet before enabling your wireless card. The point is, it worked in 8.2, it doesn't work in 9. So it must be a change somewhere. I'll have to check into the susefirewall posting. I didn't notice if it got installed or if it was even enabled. I'm thinking it's not, but worth looking into. Aric -----Original Message----- From: Vince Scimeca [mailto:vscimeca@jupitermedia.com] Sent: Friday, November 14, 2003 11:27 AM To: suse-linux-e@suse.com Subject: Re: [SLE] wireless is able to browse the lan but not the internet On Fri, 2003-11-14 at 09:39, Peter N. Spotts wrote:
Gentlemen,
Check a bit farther down the list archives -- within the last day or so. I recall that someone had worked around the problem by connecting
to his network first by cable, then somehow copying the information from that version of resolv.conf to the version his wireless card looks at. I haven't tried it yet (still on the time clock) but it looks like an interesting approach. I'm a recent immigrant from RH, and I too had relatively painless wifi support there, only to have it crash and burn here...oh well...
Pete
Pete - I did see that posted yesterday I believe, and I tried it last night to no avail. In theory that work-around should work, but it didn't for me. Also in theory hard coding my resolv.conf should work as well and it didn't. I can go on without wifi for a bit while I assume this issue is being addressed, but in the long term if it is not solved it would force me to give Fedora a bit more of a look. I like what I see from Suse thus far and I am a bit surprised that wifi seems to be an issue when it is my understanding that it worked in past versions (I have Suse9). -- ______ Vince Scimeca - Senior Technology Manager Jupitermedia Corp. vscimeca@jupitermedia.com ______ -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
Aric C. Wilisch wrote:
I havn't seen that post, but I've read similar ones. Unless everytime after that it would always use the copied resolv.conf information whenever I connect to wireless, this really isn't that useful. What's the point of having a wireless network if the only way you can make it work is to connect to ethernet before enabling your wireless card. The point is, it worked in 8.2, it doesn't work in 9. So it must be a change somewhere.
I'll have to check into the susefirewall posting. I didn't notice if it got installed or if it was even enabled. I'm thinking it's not, but worth looking into.
Aric
-----Original Message----- From: Vince Scimeca [mailto:vscimeca@jupitermedia.com] Sent: Friday, November 14, 2003 11:27 AM To: suse-linux-e@suse.com Subject: Re: [SLE] wireless is able to browse the lan but not the internet
On Fri, 2003-11-14 at 09:39, Peter N. Spotts wrote:
Gentlemen,
Check a bit farther down the list archives -- within the last day or so. I recall that someone had worked around the problem by connecting
to his network first by cable, then somehow copying the information from that version of resolv.conf to the version his wireless card looks at. I haven't tried it yet (still on the time clock) but it looks like an interesting approach. I'm a recent immigrant from RH, and I too had relatively painless wifi support there, only to have it crash and burn here...oh well...
Pete
Pete - I did see that posted yesterday I believe, and I tried it last night to no avail. In theory that work-around should work, but it didn't for me. Also in theory hard coding my resolv.conf should work as well and it didn't.
I can go on without wifi for a bit while I assume this issue is being addressed, but in the long term if it is not solved it would force me to give Fedora a bit more of a look. I like what I see from Suse thus far and I am a bit surprised that wifi seems to be an issue when it is my understanding that it worked in past versions (I have Suse9).
I didn't say the work around was the best way, yes it would be much nicer if wireless worked from the start. However, using SCPM allows you to have the firewall configuration automatically change, the default printer be selected and a number of other things. You can even set it up so that you can select the correct configuration on boot, and as Suspend to RAM or Disk don't work yet it makes it easier when moving the laptop from place to place. That said, I have encountered a problem with the work around, it only seems to work when DHCP on the eth0 card fails. If the eth0 interface keeps trying I can't get outside of my network. Back to the drawing board! I tried RedHat 9 before SuSE and it didn't even detect my wireless card, so I figure I'm ahead at this point. -- Hugh mailto: hrtlist@cpia.jhu.edu
Aric C. Wilisch wrote:
I havn't seen that post, but I've read similar ones. Unless everytime after that it would always use the copied resolv.conf information whenever I connect to wireless, this really isn't that useful.
You may have answered this, but ,<shrug> Have you set up the wireless app, and included the ip number of your router? As well as any info about wep etc. ? My wireless cf card needs to know where it's *gateway* address is.
I ran through as many different combinations as I can think of. I never bothered setting a default gateway since I'm trying to figure out why it's not getting one from my router. I checked the things others have mentioned here as well such as the firewall, which is installed but not configured or even on. I really think that it might just be a change in how the dhcp client gets it's information or it's something in the kernel configuration. I pulled it off for the moment to put Mandrake 9.2 on. Wireless works great, but I'm having issues with the keyboard and I really do prefer Suse 9, so I'm going to dump the /etc directory, then reload either 8.2 or 9 and just start working my way up till I figure what the problem is. (but I'll take any and all help, suggestions, etc :) Aric On Sat, 2003-11-15 at 00:40, jfweber wrote:
Aric C. Wilisch wrote:
I havn't seen that post, but I've read similar ones. Unless everytime after that it would always use the copied resolv.conf information whenever I connect to wireless, this really isn't that useful.
You may have answered this, but ,<shrug> Have you set up the wireless app, and included the ip number of your router? As well as any info about wep etc. ? My wireless cf card needs to know where it's *gateway* address is.
On Saturday 15 November 2003 11:31, awilisch wrote:
I ran through as many different combinations as I can think of. I never bothered setting a default gateway since I'm trying to figure out why it's not getting one from my router. I checked the things others have mentioned here as well such as the firewall, which is installed but not configured or even on.
I really think that it might just be a change in how the dhcp client gets it's information or it's something in the kernel configuration. I pulled it off for the moment to put Mandrake 9.2 on. Wireless works great, but I'm having issues with the keyboard and I really do prefer Suse 9, so I'm going to dump the /etc directory, then reload either 8.2 or 9 and just start working my way up till I figure what the problem is. (but I'll take any and all help, suggestions, etc :)
<snip> When experiencing similar problems, the following format of dhcpcd command was used as it provides more information : dhcpcd -n -d -B wlan0. Replace wlan0 with the network interface requiring an IP address from a DHCP server. Under YaST2, launch the yast2->system->sysconfig module and search for "resolv" and "dhcp". Review the flags for the various settings. It possible that the variable "dynamically update resolv" is switched off. This should be switched on. Similarly, check any other flags relating to dhclient and resolv are flagged to update routes and gateways. If these are turned off, the routing will not be set as expected. Turn these on. Before using the internet, on the pc here the firewall and DNS has to be restarted. HTH. LW999
LinuxWorld999 wrote:
On Saturday 15 November 2003 11:31, awilisch wrote:
I ran through as many different combinations as I can think of. I never bothered setting a default gateway since I'm trying to figure out why it's not getting one from my router. I checked the things others have mentioned here as well such as the firewall, which is installed but not configured or even on.
I really think that it might just be a change in how the dhcp client gets it's information or it's something in the kernel configuration. I pulled it off for the moment to put Mandrake 9.2 on. Wireless works great, but I'm having issues with the keyboard and I really do prefer Suse 9, so I'm going to dump the /etc directory, then reload either 8.2 or 9 and just start working my way up till I figure what the problem is. (but I'll take any and all help, suggestions, etc :)
<snip>
When experiencing similar problems, the following format of dhcpcd command was used as it provides more information :
dhcpcd -n -d -B wlan0.
Replace wlan0 with the network interface requiring an IP address from a DHCP server.
Under YaST2, launch the yast2->system->sysconfig module and search for "resolv" and "dhcp". Review the flags for the various settings. It possible that the variable "dynamically update resolv" is switched off. This should be switched on. Similarly, check any other flags relating to dhclient and resolv are flagged to update routes and gateways. If these are turned off, the routing will not be set as expected. Turn these on.
Before using the internet, on the pc here the firewall and DNS has to be restarted.
HTH.
LW999
I just got it working by running dhcpcd wlan0 as root from a command prompt, not sure why it worked, I'll look into that later. At least now I can go from hardwired at work to wireless at home without having to connect hardwired at home first. Maybe by putting the command in a script in the Profile Manager I can automate the process - I'll try later - after I get some real work done. -- Hugh mailto: hrtlist@cpia.jhu.edu
Aric C. Wilisch wrote:
I have this problem as well. I have a Toshiba Satallite with an Orinoco Gold pcmcia card. Thing is, the card works fine with my Windows XP partition, it's worked well with my distributions of Red Hat and Mandrake and EVEN worked on Suse 8.2. I know it works because when it didn't work with Suse 9, I blew away the linux partition and reloaded Suse 8.2. Wireless came up and worked like a champ. So I dropped my Suse 9 cd in and reloaded that, immediately stopped working. Built in Ethernet works great, rewrites the resolv.conf file and life is dandy. But the minute I put that wireless card in, the only thing I get in is an ip address, and the only thing in resolv.conf is my domain name.
So, if anyone from Suse is listening in, this isn't an isolated problem. You've downgraded the wireless performance. Really hope someone comes out with a fix that DOESN'T involve manually setting routes and manually configuring the resolv.conf file. We never had to do it before, shouldn't have to do it now.
Regards, Aric Wilisch knight@shadowrealms.cc
From: david stevenson
Date: Sat, 1 Nov 2003 20:22:26 +0000 Message-Id: <200311012022.26023.suse@avoncliff.com> Subject: Re: [SLE] wireless is able to browse the lan but not the internet On Saturday 01 November 2003 4:49 am, chadd wrote:
I've found a problem on my notebook (Compaq Armada M700, WL110 wireless) whereas the embedded nic will acquire the IP address & the nameserver
info
but the wireless will only obtain an IP address. This allows me to
browse
my home LAN (everything behind the router) but I cannot get out when
only
using my wireless nic.
Initially I thought I would have to set my gateway to my router's address (192.168.1.1) but I've found that doesn't make a difference. I've tried this at home (w/ a Linksys router). Even if I activate eht0
(embedded wired nic) first & get the nameserver info entered into resolv.conf then turn off eth0 I cannot get past a my router.
Furthermore
when I plug the ethernet back in and remove the wireless nic & restart
the
network service (/etc/rc.d/network restart) I still cannot get out.
From
that point I'm stuck with a reboot and letting the system come up
without
the wireless nic installed.
I guess the first question would be: Does anyone know why my wireless will not acquire the nameserver info whereas the embedded nic will?
Secondly, even once I enter the nameserver info manually, why will the wireless not hit the Internet?
I have my SSID & encryption set correctly or I wouldn't be getting even an ip address & the ability to browse the internal network. I've also
tried
turning the encryption off to rule that out but with no luck. Also as
FYI
I've not touched the firewall this time. I've went with the default install settings. Last time I did the install though I did go through
and
set everything at the easiest level.
If anyone can give me a direction to go (other than rtfm) I would really appreciate it. I've been a red hat user for about 3 years now and I've
really started to like how Suse is looking now. If I cannot solve this
problem them I'll be stuck going back to red hat. From what I've seen
with
I had the same type problem when running the SuSEfirewall. If I turned off the firewall, it waked fine. Art
Suse 9, I would like to stick with it instead.
Any ideas?
You have not told us about your setup. I am guessing some form of broadband router connected by ethernet to a wireless access point, or directly to the PC. So when you ask the access point, via dhcp, for an IP you also get routing infomation. But when you ask the access point you get only an IP. If this is the problem then try reconfiguring the access point to pass DHCP though to the router. David
participants (13)
-
Aric C. Wilisch
-
Art Fore
-
awilisch
-
Clayton
-
Hugh Taylor
-
James Ogley
-
Jay Vollmer
-
jfweber
-
John Pettigrew
-
LinuxWorld999
-
Peter N. Spotts
-
Stanley Keymer
-
Vince Scimeca