Re: [opensuse] 11.0 Sound Problem
-------------- Original message ----------------------
From: Donald D Henson
kbboykin@comcast.net wrote:
-------------- Original message ---------------------- From: Donald D Henson
Hi Don,
I have the same or very similar card in my Toshiba laptop. I cannot hear any sound until both the PCM and master are at or above 85. Try turning up your volume and then adjust down until you can't hear it any more. Then you should find the volume you machine requires. HTH.
-- Keith Boykin You are what you think - so always think positively!
------------------------------------------------------------------------
Subject: [opensuse] 11.0 Sound Problem From: Donald D Henson
Date: Sat, 28 Jun 2008 13:25:18 +0000 To: OpenSUSE Mailing List To: OpenSUSE Mailing List
I'm having problems setting up sound in 11.0. I think all the options are confusing me. The YaST Sound Configuration module tells me:
82801I (ICH9 Family) HD Audio Controller • Configured as sound card number 0 • Driver snd-hda-intel
I set both the Master & PCM volume sliders to 67 but Test produces no sound. The help screen just confused me more. All I'm looking for is a preferably simple setup that will allow most applications to produce basic sound. If you know of such a setup, please point me to it. Any assistance will be appreciated.
Don Henson
No work. I set the PCM and Master sliders to 85. No sound. Set sliders to 95. No sound. Set sliders too 100. No sound. Any other suggestions? Don Henson
On 06/29/2008 12:22 AM, Donald D Henson wrote:
No work. I set the PCM and Master sliders to 85. No sound. Set sliders to 95. No sound. Set sliders too 100. No sound. Any other suggestions?
What are your module options set to? They can be set manually via /etc/modprobe.d/sound, or via yast. That drivers needs more info to work with specific sound cards. Check modinfo snd-hda-intel for a list of options. model is a common need, and enable=1, and position_fix. Google may help with specifics for your card. -- Joe Morris Registered Linux user 231871 running openSUSE 10.3 x86_64 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Joe Morris wrote:
On 06/29/2008 12:22 AM, Donald D Henson wrote:
No work. I set the PCM and Master sliders to 85. No sound. Set sliders to 95. No sound. Set sliders too 100. No sound. Any other suggestions?
What are your module options set to? They can be set manually via /etc/modprobe.d/sound, or via yast. That drivers needs more info to work with specific sound cards. Check modinfo snd-hda-intel for a list of options. model is a common need, and enable=1, and position_fix. Google may help with specifics for your card.
Now we're getting into definite non-newbie territory. I don't even know what a module option is, much less where to find one and what to set it to. I executed the modinfo command and got a couple of screenfuls of coded somethings that I wouldn't touch with a 3-meter pole. I appreciate your intent to help (I really do) but your suggestion is way beyond my skill level. Don Henson
On Sunday 29 June 2008 03:34:57 am Donald D Henson wrote:
What are your module options set to? They can be set manually via /etc/modprobe.d/sound, or via yast. That drivers needs more info to work with specific sound cards. Check modinfo snd-hda-intel for a list of options. model is a common need, and enable=1, and position_fix. Google may help with specifics for your card.
Now we're getting into definite non-newbie territory. I don't even know what a module option is, much less where to find one and what to set it to. I executed the modinfo command and got a couple of screenfuls of coded somethings that I wouldn't touch with a 3-meter pole. I appreciate your intent to help (I really do) but your suggestion is way beyond my skill level.
Just use console: cat /etc/modprobe.d/sound it will be only few lines. Mark them with mouse, bring cursor in email message where you want to copy what you just marked and press middle mouse button (or wheel). Voila. The same with command: /sbin/lspci Maybe the best way is to see instructions here: http://en.opensuse.org/SDB:AudioTroubleshooting http://en.opensuse.org/SDB:Intel-HDA_sound_problems that will give you idea what is the most probable problem. -- Regards, Rajko http://en.opensuse.org/Portal needs helpful hands. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
Rajko M. wrote:
On Sunday 29 June 2008 03:34:57 am Donald D Henson wrote:
What are your module options set to? They can be set manually via /etc/modprobe.d/sound, or via yast. That drivers needs more info to work with specific sound cards. Check modinfo snd-hda-intel for a list of options. model is a common need, and enable=1, and position_fix. Google may help with specifics for your card. Now we're getting into definite non-newbie territory. I don't even know what a module option is, much less where to find one and what to set it to. I executed the modinfo command and got a couple of screenfuls of coded somethings that I wouldn't touch with a 3-meter pole. I appreciate your intent to help (I really do) but your suggestion is way beyond my skill level.
Just use console: cat /etc/modprobe.d/sound it will be only few lines. Mark them with mouse, bring cursor in email message where you want to copy what you just marked and press middle mouse button (or wheel). Voila.
The same with command: /sbin/lspci
Maybe the best way is to see instructions here: http://en.opensuse.org/SDB:AudioTroubleshooting http://en.opensuse.org/SDB:Intel-HDA_sound_problems that will give you idea what is the most probable problem.
I really thought your link was going to solve the problem but no joy. I seem to be headed for at least a reboot. Thanks for trying. Don Henson
participants (4)
-
Donald D Henson
-
Joe Morris
-
kbboykin@comcast.net
-
Rajko M.