I know I should install Win95 first, then SuSE BUT, due to conditions beyond my control, all I could do was leave a 2Gb partition empty for future Win95 instllation. I went ahead and installed SuSE 9.1 using the Grub boot manager. When I install Win95, it will replace Grub, right? Question: Can I just restore Grub and have dual boot capabilities back or must I start over? It would also be nice to be able to mount the FAT32 parttion in 9.1. Thank you, Lucky Leavell
In a previous message, Lucky Leavell
When I install Win95, it will replace Grub, right?
Yes.
Question: Can I just restore Grub and have dual boot capabilities back or must I start over?
Yes. Before installing Win95, put Grub onto a floppy so that you can get back into linux, then install Windows. Now, use the floppy to get back into linux and run the YaST bootloader module. Should configure it for you, I think, but you can add the windows section manually if needed (I'm sure someone here can give you the necessary details). HTH John -- John Pettigrew Headstrong Games john@headstrong-games.co.uk Fun : Strategy : Price http://www.headstrong-games.co.uk/ Board games that won't break the bank Valley of the Kings: ransack an ancient Egyptian tomb but beware of mummies!
John Pettigrew wrote:
In a previous message, Lucky Leavell
wrote: When I install Win95, it will replace Grub, right?
Yes.
Question: Can I just restore Grub and have dual boot capabilities back or must I start over?
Yes. Before installing Win95, put Grub onto a floppy so that you can get back into linux, then install Windows. Now, use the floppy to get back into linux and run the YaST bootloader module. Should configure it for you, I think, but you can add the windows section manually if needed (I'm sure someone here can give you the necessary details).
The floppy is not necessary. You can use the SUSE 9.1 CD1 to boot in rescue mode, mount your rootfs in /mnt, then chroot /mnt, and "grub-install". Then "exit", umount /mnt, reboot. After that, add a windows section in /boot/grub/menu.lst Manually or with YaST.
In a previous message, Silviu Marin-Caea
John Pettigrew wrote:
In a previous message, Lucky Leavell
wrote: Question: Can I just restore Grub and have dual boot capabilities back or must I start over?
Yes. Before installing Win95, put Grub onto a floppy
The floppy is not necessary.
True, but it's easier to do and harder to get wrong :) John -- John Pettigrew Headstrong Games john@headstrong-games.co.uk Fun : Strategy : Price http://www.headstrong-games.co.uk/ Board games that won't break the bank Valley of the Kings: ransack an ancient Egyptian tomb but beware of mummies!
On Friday 04 June 2004 10:29 am, John Pettigrew wrote:
In a previous message, Silviu Marin-Caea
wrote: John Pettigrew wrote:
In a previous message, Lucky Leavell
wrote: Question: Can I just restore Grub and have dual boot capabilities back or must I start over?
Yes. Before installing Win95, put Grub onto a floppy
The floppy is not necessary.
True, but it's easier to do and harder to get wrong :)
John
IMHO using the 'rescue system' on the CD/DVD is the easiest. -- +----------------------------------------------------------------------------+ + Bruce S. Marshall bmarsh@bmarsh.com Bellaire, MI 06/04/04 10:44 + +----------------------------------------------------------------------------+ 'A person with one watch knows what time it is; a person' 'with two watches is never sure.'
On Friday 04 June 2004 15:53, Silviu Marin-Caea wrote:
John Pettigrew wrote:
In a previous message, Lucky Leavell
wrote: When I install Win95, it will replace Grub, right?
Yes.
Question: Can I just restore Grub and have dual boot capabilities back or must I start over?
Yes. Before installing Win95, put Grub onto a floppy so that you can get back into linux, then install Windows. Now, use the floppy to get back into linux and run the YaST bootloader module. Should configure it for you, I think, but you can add the windows section manually if needed (I'm sure someone here can give you the necessary details).
The floppy is not necessary.
Indeed.
You can use the SUSE 9.1 CD1 to boot in rescue mode, mount your rootfs in /mnt, then chroot /mnt, and
Yess, you're on track, I would do that...
"grub-install".
In a chroot environment, I would do 'grub < /etc/grub.conf/' That's what YaST would do. ;)
Then "exit", umount /mnt, reboot.
After that, add a windows section in /boot/grub/menu.lst Manually or with YaST.
Yes. :) Cheers, Leen
On Friday 04 June 2004 13:22, Lucky Leavell wrote:
I know I should install Win95 first
~ maybe, reasonable idea : 1st partition : 50 to 100 MB /boot partition 2nd partition for M$ 3rd partition for Linux Swap 4th [ separator between Primary + Logical Partitions ] 5th + onwards, logical partitions for Linux affairs Suspicion: M$ may not exactly respect Partition Boundaries when doing its M$ installation format, but, if the swap part. is used as a buffer/sandwich between M$ & Linux then no great damage will be done :-O -- best wishes ____________ sent on Linux ____________
Lucky Leavell wrote:
I know I should install Win95 first, then SuSE BUT, due to conditions beyond my control, all I could do was leave a 2Gb partition empty for future Win95 instllation. I went ahead and installed SuSE 9.1 using the Grub boot manager.
When I install Win95, it will replace Grub, right?
Question: Can I just restore Grub and have dual boot capabilities back or must I start over? It would also be nice to be able to mount the FAT32 parttion in 9.1.
You'll likely have to reset the MBR, to start Grub. Run fdisk, to see what the starable partition was, then run fdisk again after installing W95, to reset it to what it was, before Windows screwed it up.
participants (7)
-
Bruce Marshall
-
James Knott
-
John Pettigrew
-
Leendert Meyer
-
Lucky Leavell
-
pinto
-
Silviu Marin-Caea