I did solve this problem by upgrading to a newer version of k3b (0.11.2 or 0.11.3). I should have mentionned this to the list, I hope I am catching back with this ;-). But afterwards, I wanted to use the cloning functionality and had to use a new experimental cdrecord which causes the writing of a cloned copy to fail in my case. There is a version 0.11.5, now. I haven't tried it yet. HTH, Patrick wmeler wrote:

Did you ever figure out the problem? I am seeing the same thing!

-----Original Message----- From: Patriiiiiiiiiick Sent: Feb 11, 2004 7:13 AM To: trueg@k3b.org, suse Cc: kd@k3b.org Subject: [SLE] k3b CD-RW fails with unkown code 11

Hello!

I am trying to write a data CD-RW but it fails saying an unknown error occured (code 11). Please find the output below. Do you have any idea where this comes from?

Thanks in advance for your help!

Patrick

---

System ----------------------- K3b Version: 0.11 KDE Version: 3.2.0 QT Version: 3.3.0

cdrecord ----------------------- /usr/bin/cdrecord: Warning: not running as root user, fs= option ignored. scsidev: '0,4,0' scsibus: 0 target: 4 lun: 0 Linux sg driver version: 3.1.24 /usr/bin/cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.75-resmgr-patch '@(#)scsi-linux-sg.c 1.75 02/10/21 Copyright 1997 J. Schilling'). Cdrecord 2.0 (i686-suse-linux) Copyright (C) 1995-2002 Jörg Schilling TOC Type: 3 = CD-ROM XA mode 2 Using libscg version 'schily-0.7' atapi: 0 Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : SYNC LINKED Vendor_info : 'PLEXTOR ' Identifikation : 'CD-R PX-W124TS' Revision : '1.07' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC SWABAUDIO Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 2373168 = 2317 KB FIFO size : 4194304 = 4096 KB Track 01: data 556 MB Total size: 639 MB (63:21.41) = 285106 sectors Lout start: 639 MB (63:23/31) = 285106 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Reference speed: 0 Is not unrestricted Is erasable ATIP start of lead in: -11650 (97:26/50) ATIP start of lead out: 337050 (74:56/00) 1T speed low: 0 (reserved val 0) 1T speed high: 4 power mult factor: 7 6 recommended erase/write power: 3 A1 values: 02 7C B0 Disk type: Phase change Manuf. index: 10 Manufacturer: Lead Data Inc. Blocks total: 337050 Blocks current: 337050 Blocks remaining: 51944 RBlocks total: 351205 RBlocks current: 351205 RBlocks remaining: 66099 Starting to write CD/DVD at speed 4 in real TAO mode for multi session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts.

cdrecord comand: ----------------------- /usr/bin/cdrecord -v gracetime=2 dev=0,4,0 speed=4 -eject -overburn -multi -xa1 -tsize=285104s -

mkisofs ----------------------- 285104 /usr/bin/mkisofs: Resource temporarily unavailable. cannot fwrite 4096*1

mkisofs comand: ----------------------- /usr/bin/mkisofs -gui -graft-points -V K3b data project -volset -A K3B THE CD KREATOR VERSION 0.11 (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -P -p K3b - Version 0.11 -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-patrick/k3bCDHoha.tmp -r -hide-list /tmp/kde-patrick/k3bDqSc4b.tmp -l -iso-level 2 -path-list /tmp/kde-patrick/k3bQ3rxDb.tmp