Re: [opensuse] No sound - 10.3
----- Original Message ----
From: Michael Juntunen
Michael Juntunen wrote:
Upon further investigation, YAST is giving an error message of,
"The kernel module snd-via82xx for sound suport could not be loaded. This can be caused by incorrect module parameters, including invalid IO or IRQ parameters."
So assuming this is not some generic red herring, how do I check the IO and IRQ parameters?
Michael
As root lspci cat /proc/interrupts -- David C. Rankin, J.D., P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
--- "David C. Rankin"
Michael Juntunen wrote:
Upon further investigation, YAST is giving an
error message of,
"The kernel module snd-via82xx for sound suport
could not be loaded. This can be caused by incorrect module parameters, including invalid IO or IRQ parameters."
So assuming this is not some generic red herring,
how do I check the IO and IRQ parameters?
Michael
As root
lspci
cat /proc/interrupts
unknown:/proc # lspci 00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge (rev 01) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] 00:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) 00:08.0 RAID bus controller: Promise Technology, Inc. PDC20378 (FastTrak 378/SATA 378) (rev 02) 00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13) 00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) 00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60) 00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:00.0 VGA compatible controller: nVidia Corporation NV44A [GeForce 6200] (rev a1) unknown:/proc # unknown:/proc # unknown:/proc # unknown:/proc # unknown:/proc # unknown:/proc # cat /proc/interrupts CPU0 0: 234 IO-APIC-edge timer 1: 17262 IO-APIC-edge i8042 6: 5 IO-APIC-edge floppy 7: 0 IO-APIC-edge parport0 8: 2 IO-APIC-edge rtc 9: 0 IO-APIC-fasteoi acpi 12: 5605598 IO-APIC-edge i8042 14: 1797214 IO-APIC-edge libata 15: 2220155 IO-APIC-edge libata 16: 0 IO-APIC-fasteoi sata_promise 17: 0 IO-APIC-fasteoi sata_via 18: 1895775 IO-APIC-fasteoi uhci_hcd:usb1, uhci_hcd:usb2, ehci_hcd:usb3, uhci_hcd:usb4, uhci_hcd:usb5 19: 12277968 IO-APIC-fasteoi eth0 20: 2 IO-APIC-fasteoi ohci1394 21: 102703 IO-APIC-fasteoi VIA8237 NMI: 0 LOC: 33734468 ERR: 0 MIS: 0 Okay I see the sound chip listed on the lspci command and I see the via8237 list in the interupts listing. What does this mean? Michael ____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
participants (2)
-
David C. Rankin
-
Michael Juntunen