[SLE] epson RX620 printer stopped working
I have an RX620 which was working fine. It stopped working just before I went away for several weeks. I'm now back and have time to investigate why ... I don't remember changing anything, but of course it's too long ago to be sure! The RX620 is an all-in-one device. It still works free-standing and the scanner is still working with xsane and I can still see the card reader device, so the USB side of things is still working. When I try to print a test page from YaST I get a dialog box with the following text (it is really annoying that I can't copy and paste text in a dialog :): "An error ... CUPS ... y2test. cups(File)DoRequest error: client-error-bad-request" Anybody have any idea on what it is or where to look next? It's a SUSE 9.3 system. The CUPS error log shows the following: D [10/Jul/2006:21:35:12 +0100] AcceptClient: 9 from localhost:631. D [10/Jul/2006:21:35:12 +0100] CloseClient: 9 I [10/Jul/2006:21:35:15 +0100] Scheduler shutting down normally. D [10/Jul/2006:21:35:15 +0100] StopListening: closing all listen sockets. D [10/Jul/2006:21:35:15 +0100] PauseListening: clearing input bits... I [10/Jul/2006:21:35:15 +0100] Listening to 0:631 D [10/Jul/2006:21:35:15 +0100] AddLocation: added location 'CUPS_INTERNAL_BROWSE_ACL' D [10/Jul/2006:21:35:15 +0100] AllowHost: CUPS_INTERNAL_BROWSE_ACL allow @LOCAL D [10/Jul/2006:21:35:15 +0100] DenyIP: CUPS_INTERNAL_BROWSE_ACL deny 00000000/00000000 D [10/Jul/2006:21:35:15 +0100] AddLocation: added location '/' D [10/Jul/2006:21:35:15 +0100] DenyIP: / deny 00000000/00000000 D [10/Jul/2006:21:35:15 +0100] AllowIP: / allow 7f000001/ffffffff D [10/Jul/2006:21:35:15 +0100] AllowIP: / allow 7f000002/ffffffff D [10/Jul/2006:21:35:15 +0100] AllowHost: / allow @LOCAL D [10/Jul/2006:21:35:15 +0100] AddLocation: added location '/admin' D [10/Jul/2006:21:35:15 +0100] DenyIP: /admin deny 00000000/00000000 D [10/Jul/2006:21:35:15 +0100] AllowIP: /admin allow 7f000001/ffffffff I [10/Jul/2006:21:35:15 +0100] Loaded configuration file "/etc/cups/cupsd.conf" I [10/Jul/2006:21:35:15 +0100] Configured for up to 100 clients. I [10/Jul/2006:21:35:15 +0100] Allowing up to 100 client connections per host. I [10/Jul/2006:21:35:15 +0100] Full reload is required. D [10/Jul/2006:21:35:15 +0100] LoadAllPrinters: Loading printer ESPrx620... D [10/Jul/2006:21:35:15 +0100] LoadAllPrinters: Loading printer rx620... D [10/Jul/2006:21:35:15 +0100] LoadDevices: Added device "ipp"... D [10/Jul/2006:21:35:15 +0100] LoadDevices: Added device "lpd"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "smb"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "usb://EPSON/Stylus%20Photo%20RX620"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "usb:/dev/usblp1"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "usb:/dev/usblp2"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "usb:/dev/usblp3"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "usb:/dev/usblp4"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "usb:/dev/usblp5"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "usb:/dev/usblp6"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "usb:/dev/usblp7"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "usb:/dev/usblp8"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "usb:/dev/usblp9"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "usb:/dev/usblp10"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "usb:/dev/usblp11"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "usb:/dev/usblp12"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "usb:/dev/usblp13"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "usb:/dev/usblp14"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "usb:/dev/usblp15"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "http"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "pipe"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "scsi"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "canon:/dev/lp0"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "epson:/dev/lp0"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "epson:/dev/usb/lp0"...D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "parallel:/dev/lp0"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "novell"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "serial:/dev/ttyS0?baud=115200"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "serial:/dev/ttyS1?baud=115200"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "serial:/dev/ttyS2?baud=115200"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "serial:/dev/ttyS3?baud=115200"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "serial:/dev/ttyS4?baud=115200"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "serial:/dev/ttyS5?baud=115200"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "serial:/dev/ttyS6?baud=115200"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "serial:/dev/ttyS7?baud=115200"... D [10/Jul/2006:21:35:16 +0100] LoadDevices: Added device "socket"... I [10/Jul/2006:21:35:16 +0100] LoadPPDs: Read "/etc/cups/ppds.dat", 3515 PPDs...I [10/Jul/2006:21:35:17 +0100] LoadPPDs: No new or changed PPDs... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Scanning /var/spool/cups... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 3... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 9... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 10... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 11... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 12... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 13... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 14... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 16... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 17... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 18... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 19... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 20... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 21... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 22... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 23... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 24... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 25... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 26... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 27... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 28... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 29... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 30... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 31... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 32... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 33... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 34... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 35... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 36... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 37... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 38... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 39... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 40... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 41... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 42... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 43... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 44... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 45... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 46... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 47... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 48... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 49... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 50... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 51... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 52... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 53... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 54... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 55... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 56... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 57... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 58... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 59... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 60... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 61... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 62... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 63... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 64... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 65... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 66... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 67... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 68... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 69... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 70... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 71... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 72... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 73... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 74... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 75... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 76... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 77... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 78... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 79... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 80... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 81... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 82... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 83... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 84... D [10/Jul/2006:21:35:17 +0100] LoadAllJobs: Loading attributes for job 86... I [10/Jul/2006:21:35:17 +0100] Full reload complete. D [10/Jul/2006:21:35:17 +0100] StartListening: NumListeners=1 D [10/Jul/2006:21:35:17 +0100] StartListening: address=00000000 port=631 D [10/Jul/2006:21:35:17 +0100] ResumeListening: setting input bits... D [10/Jul/2006:21:35:17 +0100] AcceptClient: 9 from localhost:631. D [10/Jul/2006:21:35:17 +0100] ReadClient: 9 POST / HTTP/1.1 D [10/Jul/2006:21:35:17 +0100] ProcessIPPRequest: 9 status_code=0 D [10/Jul/2006:21:35:17 +0100] AcceptClient: 11 from localhost:631. D [10/Jul/2006:21:35:17 +0100] CloseClient: 9 D [10/Jul/2006:21:35:17 +0100] ReadClient: 11 POST / HTTP/1.1 D [10/Jul/2006:21:35:17 +0100] ProcessIPPRequest: 11 status_code=1 D [10/Jul/2006:21:35:17 +0100] ReadClient: 11 POST / HTTP/1.1 D [10/Jul/2006:21:35:17 +0100] ProcessIPPRequest: 11 status_code=1 D [10/Jul/2006:21:35:17 +0100] ReadClient: 11 POST / HTTP/1.1 D [10/Jul/2006:21:35:17 +0100] ProcessIPPRequest: 11 status_code=0 D [10/Jul/2006:21:35:17 +0100] AcceptClient: 9 from localhost:631. D [10/Jul/2006:21:35:17 +0100] CloseClient: 11 D [10/Jul/2006:21:35:17 +0100] ReadClient: 9 POST / HTTP/1.1 D [10/Jul/2006:21:35:17 +0100] ProcessIPPRequest: 9 status_code=0 D [10/Jul/2006:21:35:17 +0100] ReadClient: 9 GET /printers/rx620.ppd HTTP/1.1 D [10/Jul/2006:21:35:17 +0100] SendFile: 9 file=11 D [10/Jul/2006:21:35:17 +0100] ReadClient: 9 POST / HTTP/1.1 D [10/Jul/2006:21:35:17 +0100] ProcessIPPRequest: 9 status_code=0 D [10/Jul/2006:21:35:17 +0100] ReadClient: 9 GET /printers/ESPrx620.ppd HTTP/1.1D [10/Jul/2006:21:35:17 +0100] SendFile: 9 file=11 D [10/Jul/2006:21:35:17 +0100] AcceptClient: 11 from localhost:631. D [10/Jul/2006:21:35:17 +0100] ReadClient: 11 POST /admin/ HTTP/1.1 D [10/Jul/2006:21:35:17 +0100] SendError: 11 code=401 (Unauthorized) D [10/Jul/2006:21:35:17 +0100] CloseClient: 11 D [10/Jul/2006:21:35:17 +0100] AcceptClient: 11 from localhost:631. D [10/Jul/2006:21:35:17 +0100] ReadClient: 11 POST /admin/ HTTP/1.1 I [10/Jul/2006:21:35:17 +0100] Setting y2test device-uri to "usb:/dev/usb/lp0" (was "file:/dev/null".) I [10/Jul/2006:21:35:17 +0100] Setting y2test printer-is-accepting-jobs to 1 (was 0.) E [10/Jul/2006:21:35:17 +0100] Attempt to set y2test printer-state to bad value 5! D [10/Jul/2006:21:35:17 +0100] Sending error: client-error-bad-request D [10/Jul/2006:21:35:17 +0100] ProcessIPPRequest: 11 status_code=400 D [10/Jul/2006:21:35:17 +0100] AcceptClient: 14 from localhost:631. D [10/Jul/2006:21:35:17 +0100] CloseClient: 11 D [10/Jul/2006:21:35:17 +0100] ReadClient: 14 POST / HTTP/1.1 D [10/Jul/2006:21:35:17 +0100] ProcessIPPRequest: 14 status_code=1 D [10/Jul/2006:21:35:17 +0100] ReadClient: 14 POST / HTTP/1.1 D [10/Jul/2006:21:35:17 +0100] ProcessIPPRequest: 14 status_code=1 D [10/Jul/2006:21:35:17 +0100] ReadClient: 14 POST / HTTP/1.1 D [10/Jul/2006:21:35:17 +0100] ProcessIPPRequest: 14 status_code=0 D [10/Jul/2006:21:35:17 +0100] CloseClient: 14 D [10/Jul/2006:21:40:18 +0100] Closing client 9 after 300 seconds of inactivity... D [10/Jul/2006:21:40:18 +0100] CloseClient: 9 D [10/Jul/2006:21:41:35 +0100] AcceptClient: 9 from localhost:631. D [10/Jul/2006:21:41:35 +0100] ReadClient: 9 POST / HTTP/1.1 D [10/Jul/2006:21:41:35 +0100] ProcessIPPRequest: 9 status_code=1 D [10/Jul/2006:21:41:35 +0100] ReadClient: 9 POST / HTTP/1.1 D [10/Jul/2006:21:41:36 +0100] ProcessIPPRequest: 9 status_code=1 D [10/Jul/2006:21:41:36 +0100] ReadClient: 9 POST / HTTP/1.1 D [10/Jul/2006:21:41:36 +0100] ProcessIPPRequest: 9 status_code=0 D [10/Jul/2006:21:41:36 +0100] CloseClient: 9 D [10/Jul/2006:21:41:36 +0100] AcceptClient: 9 from localhost:631. D [10/Jul/2006:21:41:36 +0100] ReadClient: 9 POST /printers/y2test HTTP/1.1 D [10/Jul/2006:21:41:36 +0100] print_job: auto-typing file... D [10/Jul/2006:21:41:36 +0100] print_job: request file type is text/plain. D [10/Jul/2006:21:41:36 +0100] check_quotas: requesting-user-name = 'root' D [10/Jul/2006:21:41:36 +0100] print_job: requesting-user-name = 'root' D [10/Jul/2006:21:41:36 +0100] Adding default job-sheets values "none,none"... I [10/Jul/2006:21:41:36 +0100] Adding start banner page "none" to job 87. I [10/Jul/2006:21:41:36 +0100] Adding end banner page "none" to job 87. I [10/Jul/2006:21:41:36 +0100] Job 87 queued on 'y2test' by 'root'. D [10/Jul/2006:21:41:36 +0100] Job 87 hold_until = 0 D [10/Jul/2006:21:41:36 +0100] ProcessIPPRequest: 9 status_code=0 D [10/Jul/2006:21:41:36 +0100] CloseClient: 9 D [10/Jul/2006:21:41:40 +0100] AcceptClient: 9 from localhost:631. D [10/Jul/2006:21:41:40 +0100] ReadClient: 9 POST / HTTP/1.1 D [10/Jul/2006:21:41:40 +0100] ProcessIPPRequest: 9 status_code=0 D [10/Jul/2006:21:41:40 +0100] AcceptClient: 11 from localhost:631. D [10/Jul/2006:21:41:40 +0100] CloseClient: 9 D [10/Jul/2006:21:41:40 +0100] ReadClient: 11 POST / HTTP/1.1 D [10/Jul/2006:21:41:40 +0100] ProcessIPPRequest: 11 status_code=1 D [10/Jul/2006:21:41:40 +0100] ReadClient: 11 POST / HTTP/1.1 D [10/Jul/2006:21:41:40 +0100] ProcessIPPRequest: 11 status_code=1 D [10/Jul/2006:21:41:41 +0100] ReadClient: 11 POST / HTTP/1.1 D [10/Jul/2006:21:41:41 +0100] ProcessIPPRequest: 11 status_code=0 D [10/Jul/2006:21:41:41 +0100] AcceptClient: 9 from localhost:631. D [10/Jul/2006:21:41:41 +0100] CloseClient: 11 D [10/Jul/2006:21:41:41 +0100] ReadClient: 9 POST / HTTP/1.1 D [10/Jul/2006:21:41:41 +0100] ProcessIPPRequest: 9 status_code=0 D [10/Jul/2006:21:41:41 +0100] ReadClient: 9 GET /printers/rx620.ppd HTTP/1.1 D [10/Jul/2006:21:41:41 +0100] SendFile: 9 file=11 D [10/Jul/2006:21:41:41 +0100] ReadClient: 9 POST / HTTP/1.1 D [10/Jul/2006:21:41:41 +0100] ProcessIPPRequest: 9 status_code=0 D [10/Jul/2006:21:41:41 +0100] ReadClient: 9 GET /printers/ESPrx620.ppd HTTP/1.1D [10/Jul/2006:21:41:41 +0100] SendFile: 9 file=11 D [10/Jul/2006:21:41:41 +0100] AcceptClient: 11 from localhost:631. D [10/Jul/2006:21:41:41 +0100] ReadClient: 11 POST /admin/ HTTP/1.1 D [10/Jul/2006:21:41:41 +0100] SendError: 11 code=401 (Unauthorized) D [10/Jul/2006:21:41:41 +0100] CloseClient: 11 D [10/Jul/2006:21:41:41 +0100] AcceptClient: 11 from localhost:631. D [10/Jul/2006:21:41:41 +0100] ReadClient: 11 POST /admin/ HTTP/1.1 D [10/Jul/2006:21:41:41 +0100] CancelJob: id = 87 I [10/Jul/2006:21:41:41 +0100] Printer 'y2test' deleted by 'root'. I [10/Jul/2006:21:41:41 +0100] Saving printers.conf... D [10/Jul/2006:21:41:41 +0100] ProcessIPPRequest: 11 status_code=0 D [10/Jul/2006:21:41:41 +0100] CloseClient: 11 Thanks and regards, Dave PS logrotate doesn't seem to have an include file for CUPS. Should it? I've created one, which will hopefully remove my 200 MB+ log files! -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
On Mon, 2006-07-10 at 21:47 +0100, Dave Howorth wrote:
I have an RX620 which was working fine. It stopped working just before I went away for several weeks. I'm now back and have time to investigate why ...
I didn't get any suggestions, so I did the easiest thing - reinstall all the printing software through YaST. Good news: now the printer works :) Bad news - this system feels more like Windows than Unix - if it doesn't work, reinstall it :(.
PS logrotate doesn't seem to have an include file for CUPS. Should it? I've created one, which will hopefully remove my 200 MB+ log files!
My include file has worked. Cheers, Dave -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
On Mon, 2006-07-10 at 21:47 +0100, Dave Howorth wrote:
I have an RX620 which was working fine. It stopped working just before I went away for several weeks. I'm now back and have time to investigate why ...
I don't remember changing anything, but of course it's too long ago to be sure!
The RX620 is an all-in-one device. It still works free-standing and the
Sounds like a power hickup corrupted the configuration file. change printers and save the changes. Log out to be sure all things are written to disk. Log in and change the printer back. -- _______ _______ _______ __ / ____\ \ / / ____|_ _\ \ / / | | \ \ /\ / / (___ | | \ \ / / | | \ \/ \/ / \___ \ | | \ \/ / | |____ \ /\ / ____) |_| |_ \ / \_____| \/ \/ |_____/|_____| \/ | \ /|\ || |\ / |~~\ /~~\ /~~| //~~\ | \ / | \ || | X |__/| || |( `--. |__ | | \| \_/ / \ | \ \__/ \__| \\__/ -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
participants (2)
-
Carl William Spitzer IV
-
Dave Howorth