Hello; For years I've used a printer w/ parallel port, but I had to replace it with a new HP. I have a simple network Apple Wireless router from comcast modem. Wireless bridge to a second Apple wireless router. This bridge has ethernet to SuSE 13.1 linux box. This bridge has USB connector to new HP printer. Also can connect one of several ethernet ports on bridge to HP printer. Wireless Mac talks to Linux box, Wireless Mac talks to printer. Cannot configure printer to communicate with Linux box, Linux box does not see printer in YAST. What is the transparent way to set up a printer on a Linux box? Thanks -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
* Tony Alfrey
Hello; For years I've used a printer w/ parallel port, but I had to replace it with a new HP.
I have a simple network
Apple Wireless router from comcast modem. Wireless bridge to a second Apple wireless router. This bridge has ethernet to SuSE 13.1 linux box. This bridge has USB connector to new HP printer. Also can connect one of several ethernet ports on bridge to HP printer.
Wireless Mac talks to Linux box, Wireless Mac talks to printer.
Cannot configure printer to communicate with Linux box, Linux box does not see printer in YAST. What is the transparent way to set up a printer on a Linux box?
What ip address does the bridge provide for the printer I perfer hplip and install the network printer using the printer's ip address. -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 6/13/15 8:41 PM, Patrick Shanahan wrote:
* Tony Alfrey
[06-13-15 23:26]: Hello; For years I've used a printer w/ parallel port, but I had to replace it with a new HP.
I have a simple network
Apple Wireless router from comcast modem. Wireless bridge to a second Apple wireless router. This bridge has ethernet to SuSE 13.1 linux box. This bridge has USB connector to new HP printer. Also can connect one of several ethernet ports on bridge to HP printer.
Wireless Mac talks to Linux box, Wireless Mac talks to printer.
Cannot configure printer to communicate with Linux box, Linux box does not see printer in YAST. What is the transparent way to set up a printer on a Linux box?
What ip address does the bridge provide for the printer
I perfer hplip and install the network printer using the printer's ip address.
Thanks, I will try to determine that. I suppose I need to use ifconfig to find the device and its address. Yes, I see that hplip is discussed, but I thought that it was just a bunch of drivers. I'll see if I can find something about that, too. It seems to be part of YAST, one can select that if one has an HP printer. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On Sun, 14 Jun 2015 06:43, Tony Alfrey
On 6/13/15 8:41 PM, Patrick Shanahan wrote:
* Tony Alfrey
[06-13-15 23:26]: Hello; For years I've used a printer w/ parallel port, but I had to replace it with a new HP.
I have a simple network
Apple Wireless router from comcast modem. Wireless bridge to a second Apple wireless router. This bridge has ethernet to SuSE 13.1 linux box. This bridge has USB connector to new HP printer. Also can connect one of several ethernet ports on bridge to HP printer.
Wireless Mac talks to Linux box, Wireless Mac talks to printer.
Cannot configure printer to communicate with Linux box, Linux box does not see printer in YAST. What is the transparent way to set up a printer on a Linux box?
What ip address does the bridge provide for the printer
I perfer hplip and install the network printer using the printer's ip address.
Thanks, I will try to determine that. I suppose I need to use ifconfig to find the device and its address.
Yes, I see that hplip is discussed, but I thought that it was just a bunch of drivers. I'll see if I can find something about that, too. It seems to be part of YAST, one can select that if one has an HP printer.
No, wrong. "ifconfig" is only for the interfaces local to the machine it is used on. - Your printer is connected to your "wireless brigde" via usb. - This "wireless brigde" has a ip-address. - And it exports the printer via this ip-address. - The printer itself has no own ip-address. Ergo: You want the ip-address of the "wireless brigde" the printer is connected to via usb. This is the ip-address that is used in the setup of hplib or in Yast as "raw" printer ip-address. (if any "port number" is asked, it's most likely number 9100, the ipp protocol itself uses 631, but that is NOT raw.) To get the adresses between a source box and a target box, use "traceroute". A call of "traceroute" with the name or ip of your main internet gateway (here comcast modem) should give you the "hops" between. One of them (most likely the first) should be the "wireless brigde" Else, have a closer look at the config of the printer on your Mac. - Yamaban. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 14/06/15 07:09, Yamaban wrote:
Cannot configure printer to communicate with Linux box, Linux box does not see printer in YAST. What is the transparent way to set up a printer on a Linux box?
Hi We got a new hp envy to a 13.2 installed by wireless. For the first stage, it has nothing to do with any computer. Place the printer next to the router and turn it on. It will ask you to put the wifi password. Then go to yast, printer, print via network and just take what it says. On 13.2 we needed to update cups: http://software.opensuse.org/ymp/Printing/openSUSE_13.2/cups.ymp?base=openSUSE%3A13.2&query=cups (you have to use firefox) We wasted a lot of time in yast. If you try something else, you must reboot, otherwise the settings do not take effect. HTH B -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 06/14/2015 05:05 AM, buhorojo wrote:
Hi We got a new hp envy to a 13.2 installed by wireless. For the first stage, it has nothing to do with any computer. Place the printer next to the router and turn it on. It will ask you to put the wifi password. Then go to yast, printer, print via network and just take what it says. On 13.2 we needed to update cups: http://software.opensuse.org/ymp/Printing/openSUSE_13.2/cups.ymp?base=openSUSE%3A13.2&query=cups
(you have to use firefox) We wasted a lot of time in yast. If you try something else, you must reboot, otherwise the settings do not take effect. HTH B
zypper update should be down after the installation, and periodically for that matter. CUPS is stated /etc/init.d/cups or some systemd equivilant cups is READ with http://localhost:631 HP products which are not postscript often need the hplip. I LOVE hp printers. Support though is a double edge sword Ruben -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 2015-06-14 05:26, Tony Alfrey wrote:
Hello; For years I've used a printer w/ parallel port, but I had to replace it with a new HP.
This bridge has USB connector to new HP printer. Also can connect one of several ethernet ports on bridge to HP printer.
If the printer has its own ethernet port, connect that to the router, not via USB. You will lose printer features if you do. There are also printers with WiFi.
Cannot configure printer to communicate with Linux box, Linux box does not see printer in YAST. What is the transparent way to set up a printer on a Linux box?
Probably because the firewall blocks the broadcast address used to find out where printers are. You have to tell YaST where the printer is (the IP). The IP is configured in the printer panel. If you connect the printer via USB to the router via USB, then it is the IP of the router. Another way to find it is nmap, scanning your whole network. hplip is not always needed. Yes, it is a bunch of drivers, and also an applet for the desktop. -- Cheers / Saludos, Carlos E. R. (from 13.1 x86_64 "Bottle" at Telcontar)
On Sun, Jun 14, 2015 at 3:58 AM, Carlos E. R.
Cannot configure printer to communicate with Linux box, Linux box does not see printer in YAST. What is the transparent way to set up a printer on a Linux box?
Probably because the firewall blocks the broadcast address used to find out where printers are. You have to tell YaST where the printer is (the IP).
The IP is configured in the printer panel.
Or it might be DHCP. I prefer a permanent/known IP for printers. That should be outside the DHCP range your router hands out to clients. You can set the IP on the printer as Carlos says, or set it to DHCP and have the router setup to recognize the printer's mac address and always give it a fixed IP. Here's a subnet structure I might use (assuming 192.168.1.x just as an example subnet): .1 router .2-.50 reserved for servers and other permanent IPs .50 - .100 DHCP range .100 - .150 alternate DHCP range 1 .150 - .200 alternate DHCP range 2 .250 - .254 reserved for printers I don't know if other people reserve space in there IP setup for alternate DHCP ranges. If I have a hiccup and start getting PCs whose IP is managed via IP complaining about IP collisions, my first action is to change the DHCP range so I know only fresh unused IPs are being handed out. At my office I have basically all devices setup to use DHCP, but I have the router setup to assign the ones I know a permanent IP. For me it is just cleaner. Greg -- Greg Freemyer www.IntelligentAvatar.net -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 On 2015-06-14 12:43, Greg Freemyer wrote:
On Sun, Jun 14, 2015 at 3:58 AM, Carlos E. R. <> wrote:
You can set the IP on the printer as Carlos says, or set it to DHCP and have the router setup to recognize the printer's mac address and always give it a fixed IP.
Ah. Yes, a fixed IP in any case. A random IP on the printer would be a pain to work with. - -- Cheers / Saludos, Carlos E. R. (from 13.1 x86_64 "Bottle" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iF4EAREIAAYFAlV9i/8ACgkQja8UbcUWM1zSvAD/Scfqc9DQP1LtEpDzu00jhBaD +UrHb+VSoU+IGd6exUUA/RRYeF3AemLjyx5oqVvf22kvwoDkolYZMAWW7Ung7ynM =1Nkn -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 06/14/2015 06:43 AM, Greg Freemyer wrote:
Or it might be DHCP.
I prefer a permanent/known IP for printers. That should be outside the DHCP range your router hands out to clients.
better is to not to depend on a third party router that you are uncertain of its configuration. If it is really set up as a bridge, then you can internally configure your own internal private IP space with a DHCPD service. They you KNOW what is going on. This network configuration, which was described initially as "simple" is not simple it is chaos. Ruben -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 6/14/15 6:31 PM, Ruben Safir wrote:
On 06/14/2015 06:43 AM, Greg Freemyer wrote:
Or it might be DHCP.
I prefer a permanent/known IP for printers. That should be outside the DHCP range your router hands out to clients.
better is to not to depend on a third party router that you are uncertain of its configuration. If it is really set up as a bridge, then you can internally configure your own internal private IP space with a DHCPD service. They you KNOW what is going on. This network configuration, which was described initially as "simple" is not simple it is chaos.
Ruben
It is here; http://www.sci-experiments.com/SimpleNetwork.pdf It has worked fine for nearly 20 years since I first started using Caldera. It has required several router changes; each one took ten minutes to reconfigure. I see nothing chaotic about it. Tony Alfrey -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 6/14/15 6:55 PM, Tony Alfrey wrote:
On 6/14/15 6:31 PM, Ruben Safir wrote:
On 06/14/2015 06:43 AM, Greg Freemyer wrote:
Or it might be DHCP.
I prefer a permanent/known IP for printers. That should be outside the DHCP range your router hands out to clients.
better is to not to depend on a third party router that you are uncertain of its configuration. If it is really set up as a bridge, then you can internally configure your own internal private IP space with a DHCPD service. They you KNOW what is going on. This network configuration, which was described initially as "simple" is not simple it is chaos.
Ruben
It is here; http://www.sci-experiments.com/SimpleNetwork.pdf
It has worked fine for nearly 20 years since I first started using Caldera. It has required several router changes; each one took ten minutes to reconfigure. I see nothing chaotic about it.
Tony Alfrey
And the bottom line is that if the network is disabled, I still cannot connect the printer to the SuSE box, for example, by simply plugging the printer into the USB port on the linux box. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 On 2015-06-15 03:58, Tony Alfrey wrote:
And the bottom line is that if the network is disabled, I still cannot connect the printer to the SuSE box, for example, by simply plugging the printer into the USB port on the linux box.
Because you need updating hplip. Use the printing repo. - -- Cheers / Saludos, Carlos E. R. (from 13.1 x86_64 "Bottle" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iF4EAREIAAYFAlV+McQACgkQja8UbcUWM1x8VgEAg6VZdYnQyNqC/w25BXFRnMIQ ImdwBeU6npvyCCbTxWkA/0iLqlnokP/zP3S3/hbjfaIMYjAu9XzMLuTP4+/937+S =kTEn -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 6/14/15 7:00 PM, Carlos E. R. wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256
On 2015-06-15 03:58, Tony Alfrey wrote:
And the bottom line is that if the network is disabled, I still cannot connect the printer to the SuSE box, for example, by simply plugging the printer into the USB port on the linux box.
Because you need updating hplip. Use the printing repo.
I did that. It seemed to install instantly (because all of the earlier dependencies were solved in the build). But I don't see the version upgraded. I rebooted the box and will look back in a bit.
- -- Cheers / Saludos,
Carlos E. R.
(from 13.1 x86_64 "Bottle" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux)
iF4EAREIAAYFAlV+McQACgkQja8UbcUWM1x8VgEAg6VZdYnQyNqC/w25BXFRnMIQ ImdwBeU6npvyCCbTxWkA/0iLqlnokP/zP3S3/hbjfaIMYjAu9XzMLuTP4+/937+S =kTEn -----END PGP SIGNATURE-----
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 On 2015-06-15 04:17, Tony Alfrey wrote:
On 6/14/15 7:00 PM, Carlos E. R. wrote:
Because you need updating hplip. Use the printing repo.
I did that. It seemed to install instantly (because all of the earlier dependencies were solved in the build).
If you built something, you did it wrong. You don't have to build anything. Just add the printing repo to YaST, right click on the hplip package, select update. YaST installs automatically every dependency needed, instantly. - -- Cheers / Saludos, Carlos E. R. (from 13.1 x86_64 "Bottle" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iF4EAREIAAYFAlV+OU4ACgkQja8UbcUWM1xsOgD/RU+Nx2peR7mUlKzJA5IWJaqj 9b1BPmmva8ofM8/J4M4A/3bNeINfJdfoIrcSDyxTq1SGfHuO+esNGwbaJiCD6tN9 =8ZrS -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
better is to not to depend on a third party router that you are uncertain of its configuration. If it is really set up as a bridge, then you can internally configure your own internal private IP space with a DHCPD service. They you KNOW what is going on. This network configuration, which was described initially as "simple" is not simple it is chaos.
Ruben
IT IS better is to not to depend on a third party routers that you are uncertain of its configuration. If it is really set up as a bridge, then you can internally configure your own internal private IP space with a DHCPD service. They you KNOW what is going on. This network configuration, which was described initially as "simple" is not simple it is chaos. ***Capitalization added for emphasis.*** It is not really a debate. Caldera wordperfect additions not withstanding. This is Linux. We control our software. The software does not control us... or maybe it does now with systemd Now I'm going back to listening to Pirate Radio.... great flick. Ruben -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 6/14/15 12:58 AM, Carlos E. R. wrote:
On 2015-06-14 05:26, Tony Alfrey wrote:
Hello; For years I've used a printer w/ parallel port, but I had to replace it with a new HP.
This bridge has USB connector to new HP printer. Also can connect one of several ethernet ports on bridge to HP printer.
If the printer has its own ethernet port, connect that to the router, not via USB. You will lose printer features if you do.
Did this. One click on the Mac to remove the USB printer, another click to add the network printer. Still invisible on SuSE. Then plugged USB port on printer into linux box. Printer appears in YAST, down to the serial number, but cannot find drivers. Try running the HP-setup utility that goes with YAST, now cannot find devices!
There are also printers with WiFi.
This has WiFi
Cannot configure printer to communicate with Linux box, Linux box does not see printer in YAST. What is the transparent way to set up a printer on a Linux box?
Probably because the firewall blocks the broadcast address used to find out where printers are. You have to tell YaST where the printer is (the IP).
Disabled the firewall. Printer invisible.
The IP is configured in the printer panel.
If you connect the printer via USB to the router via USB, then it is the IP of the router.
I will try that, too. This is absurd. Two clicks on the Mac. Well, maybe three. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 On 2015-06-14 20:36, Tony Alfrey wrote:
On 6/14/15 12:58 AM, Carlos E. R. wrote:
If the printer has its own ethernet port, connect that to the router, not via USB. You will lose printer features if you do.
Did this. One click on the Mac to remove the USB printer, another click to add the network printer. Still invisible on SuSE.
Mmm. With firewall disabled, I think you say later on.
Then plugged USB port on printer into linux box. Printer appears in YAST, down to the serial number, but cannot find drivers.
huh? What model is your printer? You still have not said, or I did not see it. Is hplip installed?
Try running the HP-setup utility that goes with YAST, now cannot find devices!
I don't understand this part.
There are also printers with WiFi.
This has WiFi
Ok... but you have to choose, either cable or wifi. And you must ensure that it either has a fixed IP, or that the router assigns it always the same IP.
Disabled the firewall. Printer invisible.
Just tell YaST the IP address of the printer.
The IP is configured in the printer panel.
If you connect the printer via USB to the router via USB, then it is the IP of the router.
I will try that, too.
I would not recommend it.
This is absurd. Two clicks on the Mac. Well, maybe three.
Well, CUPS is designed by Apple... But they are more interested in their pay market than the Linux "market". - -- Cheers / Saludos, Carlos E. R. (from 13.1 x86_64 "Bottle" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iF4EAREIAAYFAlV94wgACgkQja8UbcUWM1zlWAD9EzQr+Z4gRsWf08KQlEgYxcxY fecNngfCvJThApp7P3IA/0pNNwmzjETLL9nGpgJTxndeyQU+uTUL88tVwav91p+3 =qeLX -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 6/14/15 1:24 PM, Carlos E. R. wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256
On 2015-06-14 20:36, Tony Alfrey wrote:
On 6/14/15 12:58 AM, Carlos E. R. wrote:
If the printer has its own ethernet port, connect that to the router, not via USB. You will lose printer features if you do.
Did this. One click on the Mac to remove the USB printer, another click to add the network printer. Still invisible on SuSE.
Mmm. With firewall disabled, I think you say later on.
Then plugged USB port on printer into linux box. Printer appears in YAST, down to the serial number, but cannot find drivers.
huh?
Yes, I plugged the USB port on the printer into a USB port on the linux box and then asked YAST to go find printers. It finds the printer, tells me the make, model and serial number, but then cannot find a driver.
What model is your printer? You still have not said, or I did not see it.
Sorry. HP OfficeJet Pro 8610
Is hplip installed?
I think so, I will check again.
Try running the HP-setup utility that goes with YAST, now cannot find devices!
I don't understand this part.
Nor do I. There is a button in the printer set-up in YAST that says if you have an HP printer then you can use the HP printer setup. I click on that and it searches for HP printers, and doesn't fine any, in spite of YAST at least seeing the printer.
There are also printers with WiFi.
This has WiFi
Ok... but you have to choose, either cable or wifi. And you must ensure that it either has a fixed IP, or that the router assigns it always the same IP.
Disabled the firewall. Printer invisible.
Just tell YaST the IP address of the printer.
If I knew the IP address of the printer, I would do that. Below you say "If you connect the printer via USB to the router via USB, then it is the IP of the router. " I know the IP address of the router. When I do that, SuSE can find the printer. I can even assign a driver, but the printer doesn't then print. Whatever happened to the thing called a "print manager" that showed the status of the printer and the various print jobs in the queue?
The IP is configured in the printer panel.
If you connect the printer via USB to the router via USB, then it is the IP of the router.
I will try that, too.
I would not recommend it.
This is absurd. Two clicks on the Mac. Well, maybe three.
Well, CUPS is designed by Apple... But they are more interested in their pay market than the Linux "market".
We should stick with printers and not get sidetracked, but I'm all for paying for something that works. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 On 2015-06-15 00:02, Tony Alfrey wrote:
On 6/14/15 1:24 PM, Carlos E. R. wrote:
huh?
Yes, I plugged the USB port on the printer into a USB port on the linux box and then asked YAST to go find printers. It finds the printer, tells me the make, model and serial number, but then cannot find a driver.
Ah.
What model is your printer? You still have not said, or I did not see it.
Sorry. HP OfficeJet Pro 8610
Mmm. On http://www.openprinting.org/printers/manufacturer/HP that model is not listed. This is bad news. On http://hplipopensource.com/hplip-web/supported_devices/index.html you can search for printers supported by hplip. Yours seems to be this one: http://hplipopensource.com/hplip-web/models/officejet/hp_officejet_pro_8610....
Is hplip installed?
I think so, I will check again.
Make sure it is. You will need it. YaST will offer to install it for you at the appropriate point if it is not.
Try running the HP-setup utility that goes with YAST, now cannot find devices!
I don't understand this part.
Nor do I. There is a button in the printer set-up in YAST that says if you have an HP printer then you can use the HP printer setup. I click on that and it searches for HP printers, and doesn't fine any, in spite of YAST at least seeing the printer.
(see below) Ok, going to install, again, my HP printer in YaST, to describe the procedure. Connect the printer to the router, via ethernet cable, or via wifi. Configure a fixed IP for it, either in the physical panel of the printer, or tell your router to assign it always the same IP using DHCP. Take a note of the IP address of the printer. It will last years. You may add an entry for it in the /etc/hosts file. YaST, printer module. On left panel, display "printer configurations". Click on "add printer". Wait for detection to finish. It will say nothing found. Click on connection wizard. Select "TCP Port (AppSocket/JetDirect). On the right hand side, type the address IP number of the printer, or its name if you assigned it in the hosts file. Then hit the "test connection" button. If it tests Ok, select a manufacturer (HP), and click OK. YaST will think about drivers, and it will take its time. It will probably display a list. You can type "8610" to try find your model, but at least in my system it doesn't exist. Or I didn't look enough. Alternatively, on that same YaST page, you can click on "Run HP-setup". Seeing that yast doesn't find a driver, you will have to use this method. You will have to tick "advanced options" and type the IP number of your printer, on "manual discovery". Click next. I can't show you further, because my printer is different... (you may have to open UDP/5353 on the firewall)
Just tell YaST the IP address of the printer.
If I knew the IP address of the printer, I would do that. Below you say "If you connect the printer via USB to the router via USB, then it is the IP of the router. "
I know the IP address of the router. When I do that, SuSE can find the printer. I can even assign a driver, but the printer doesn't then print.
I said before "don't use this method".
Whatever happened to the thing called a "print manager" that showed the status of the printer and the various print jobs in the queue?
You need to have a printer defined in the system first.
This is absurd. Two clicks on the Mac. Well, maybe three.
Well, CUPS is designed by Apple... But they are more interested in their pay market than the Linux "market".
We should stick with printers and not get sidetracked, but I'm all for paying for something that works.
No. I'm saying that the print system in Linux, called "CUPS", is made by Apple, the same guys that made your Mac. So if things don't work that nice in Linux, perhaps it is their fault ;-P Or perhaps not. - -- Cheers / Saludos, Carlos E. R. (from 13.1 x86_64 "Bottle" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iF4EAREIAAYFAlV+CUgACgkQja8UbcUWM1wjLwD/YDnGMYP9rAIlf1RTSbTEiUdC kkZvVDQdoEgyplrH8SoA/3vj9bmIhtleZl9S4aQhgsQUiGH9pUCR9qbJc69A8yQI =9Kn6 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 6/14/15 4:07 PM, Carlos E. R. wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256
On 2015-06-15 00:02, Tony Alfrey wrote:
On 6/14/15 1:24 PM, Carlos E. R. wrote:
huh?
Yes, I plugged the USB port on the printer into a USB port on the linux box and then asked YAST to go find printers. It finds the printer, tells me the make, model and serial number, but then cannot find a driver.
Ah.
What model is your printer? You still have not said, or I did not see it.
Sorry. HP OfficeJet Pro 8610
Mmm.
On http://www.openprinting.org/printers/manufacturer/HP that model is not listed. This is bad news.
On http://hplipopensource.com/hplip-web/supported_devices/index.html you can search for printers supported by hplip. Yours seems to be this one:
http://hplipopensource.com/hplip-web/models/officejet/hp_officejet_pro_8610....
That site says this printer should be fine, but may require HPLIP 3.14.6
Is hplip installed?
I think so, I will check again.
Make sure it is. You will need it. YaST will offer to install it for you at the appropriate point if it is not.
I will first upgrade to HPLIP 3.14.6 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
1. HPLIP is installed, most up-to-date for 13.1, but not most up-to-date in general. So am using a driver for HP OfficeJet Pro 8600 rather than 8610. 2. I am using the USB port on the router and the USB port on the linux box. This way I know the IP address of the router and Carlos say it's the same as the USB port on the router. 3. In print queue setup in YAST, I try to print a test page, which fails. I click on "failed test page" and YAST gives a diagnostic window, says "printing job #___, printer is busy". 4. After I try this several times, the print queue contains several pending jobs. I delete them all and start again, with the same results. 5. I went on line and found this: "You have selected SUSE Linux 13.1 using the HP Officejet Pro 8610 E-all-in-one Printer. SUSE Linux 13.1 supplies HPLIP 3.14.6 and it does support your printer. As the version of HPLIP supplied with your operating system supports your printer, you may continue to use that version of HPLIP." so maybe I should not change. Any ideas of what is next? -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
* Tony Alfrey
1. HPLIP is installed, most up-to-date for 13.1, but not most up-to-date in general. So am using a driver for HP OfficeJet Pro 8600 rather than 8610.
I have an HP Officejet Pro 8620 and an 8615 (Sam's club badged 8610), both working on my home network with hplip-3.15.4-1.1.x86_64.
2. I am using the USB port on the router and the USB port on the linux box. This way I know the IP address of the router and Carlos say it's the same as the USB port on the router.
Unplug the usb, then query the router for the wireless address of the printer, or using the front screen of the printer to determine it's address.
3. In print queue setup in YAST, I try to print a test page, which fails. I click on "failed test page" and YAST gives a diagnostic window, says "printing job #___, printer is busy".
Do not use yast, as root from the cl use hp-setup select 2nd option "Network/Ethernet/Wireless...." select "Show Advanced Options" select "Manual Discovery" type the ip address in the window, leave the port as is. Next You should be able to follow the rest on your own.
4. After I try this several times, the print queue contains several pending jobs. I delete them all and start again, with the same results.
5. I went on line and found this:
"You have selected SUSE Linux 13.1 using the HP Officejet Pro 8610 E-all-in-one Printer. SUSE Linux 13.1 supplies HPLIP 3.14.6 and it does support your printer. As the version of HPLIP supplied with your operating system supports your printer, you may continue to use that version of HPLIP."
so maybe I should not change. Any ideas of what is next?
Be sure to program subject router for "ip allocation" and assign the ip and mac address of your 8610 to "Fixed Allocation" or whatever language your brand router uses. ps: I have also completed this task using yast with the router plugged usb to "computer" not router but should be no different. Also used yast to configure printers using wireless, but it is necessary to first *know* the ip address of the printer(s). see: http://wahoo.no-ip.org/~pat/HPOfficejetPro8620.jpg -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri http://wahoo.no-ip.org Photo Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535 @ http://linuxcounter.net -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 6/14/15 4:38 PM, Patrick Shanahan wrote:
* Tony Alfrey
[06-14-15 19:15]: 1. HPLIP is installed, most up-to-date for 13.1, but not most up-to-date in general. So am using a driver for HP OfficeJet Pro 8600 rather than 8610.
I have an HP Officejet Pro 8620 and an 8615 (Sam's club badged 8610), both working on my home network with hplip-3.15.4-1.1.x86_64.
Attempted to upgrade hplip to 3.15.4 After a long time correcting dependencies, the process crashed in "make". That's enough. I'll send my printing needs to my Mac and print from there. Thanks all. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 On 2015-06-15 02:37, Tony Alfrey wrote:
Attempted to upgrade hplip to 3.15.4 After a long time correcting dependencies, the process crashed in "make".
Why on earth are you building it? I told you to just download it from the printing repo. http://download.opensuse.org/repositories/Printing/openSUSE_13.1/x86_64/hpli... - -- Cheers / Saludos, Carlos E. R. (from 13.1 x86_64 "Bottle" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iF4EAREIAAYFAlV+IF0ACgkQja8UbcUWM1xf/gEAoINEHMCeKY7Yq+nlNQh3bH1L 3bPI5WAJdm4iQE3Wi6oBAIpgk1uXZaYNlgt0tN7OcGJX7sK7x08GHmLlkHHt7tep =2l6E -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Tony Alfrey composed on 2015-06-14 17:37 (UTC-0700):
Attempted to upgrade hplip to 3.15.4 After a long time correcting dependencies, the process crashed in "make". That's enough. I'll send my printing needs to my Mac and print from there.
Using a new printer on a Mac is notoriously easy. I wonder if your success printing on the Mac is actually because it's using Apple AirPrint rather than a conventional network connection? -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 6/14/15 6:11 PM, Felix Miata wrote:
Tony Alfrey composed on 2015-06-14 17:37 (UTC-0700):
Attempted to upgrade hplip to 3.15.4 After a long time correcting dependencies, the process crashed in "make". That's enough. I'll send my printing needs to my Mac and print from there.
Using a new printer on a Mac is notoriously easy. I wonder if your success printing on the Mac is actually because it's using Apple AirPrint™ rather than a conventional network connection?
I don't know. I've been using the same MacBook for 10 years, and with an old version of Mac OS X. Dealing with printers is always outrageously easy; I've installed several over the years, while retaining the one that connects to the bridge via USB. I can forgo the wireless part and just use an ethernet cable from the Comcast modem. Again, instant connection. I always see lots of stuff on the SuSE list about printers, so I don't feel totally stupid. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 06/14/2015 09:39 PM, Tony Alfrey wrote:
Dealing with printers is always outrageously easy;
macs suck. Use suse. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 06/14/2015 09:39 PM, Tony Alfrey wrote:
On 6/14/15 6:11 PM, Felix Miata wrote:
Tony Alfrey composed on 2015-06-14 17:37 (UTC-0700):
Attempted to upgrade hplip to 3.15.4 After a long time correcting dependencies, the process crashed in "make". That's enough. I'll send my printing needs to my Mac and print from there.
Using a new printer on a Mac is notoriously easy. I wonder if your success printing on the Mac is actually because it's using Apple AirPrint™ rather than a conventional network connection?
I don't know. I've been using the same MacBook for 10 years, and with an old version of Mac OS X. Dealing with printers is always outrageously easy; I've installed several over the years, while retaining the one that connects to the bridge via USB. I can forgo the wireless part and just use an ethernet cable from the Comcast modem. Again, instant connection.
I always see lots of stuff on the SuSE list about printers, so I don't feel totally stupid.
this has nothing to do with being for feeling stupid. This is not a pissing contest either. here is a simple dhcpcd.conf set up ruben@www:~> cat /etc/dhcpd.conf ddns-update-style none; #option domain-name "mrbrklyn.com"; #option domain-name-servers 10.0.0.5, 208.0.204.54; #option routers 96.57.23.82; #default-lease-time 14400; subnet 10.0.0.0 netmask 255.255.255.0 { # --- default gateway option routers 10.0.0.5; option subnet-mask 255.255.255.0; # option nis-domain "domain.org"; option domain-name "mrbrklyn.com"; option domain-name-servers 10.0.0.5; option time-offset -5; # Eastern Standard Time authoritative ; range dynamic-bootp 10.0.0.7 10.0.0.60; default-lease-time 21600; max-lease-time 43200; # we want the nameserver to appear at a fixed address host ns { next-server home.mrbrklyn.com; hardware ethernet 00:01:C0:09:08; fixed-address 10.0.0.5; } host enterprise { hardware ethernet 00:50:BA:A8:06:AD; fixed-address 10.0.0.61; } host flatbush { hardware ethernet 00:02:B3:31:D0:4C; fixed-address 10.0.0.62; } host phone { hardware ethernet F0:7B:CB:04:54:B1; fixed-address 10.0.0.38; } host hp551 { hardware ethernet 34:64:a9:6c:19:6b; fixed-address 10.0.0.33; } host printer { hardware ethernet 00:1B:78:10:E3:B8; fixed-address 10.0.0.51; } host stat11 { hardware ethernet 20:10:7A:56:60:1D; fixed-address 10.0.0.17; } host stat13 { hardware ethernet 00:24:7e:00:c5:d5; fixed-address 10.0.0.19; } host laptop { hardware ethernet 54:27:1e:e0:7c:8f; fixed-address 10.0.0.45; } host workstation { hardware ethernet 00:18:8B:78:62:5C; fixed-address 10.0.0.42; } } -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On Sun 14 Jun 2015 05:37:54 PM CDT, Tony Alfrey wrote:
On 6/14/15 4:38 PM, Patrick Shanahan wrote:
* Tony Alfrey
[06-14-15 19:15]: 1. HPLIP is installed, most up-to-date for 13.1, but not most up-to-date in general. So am using a driver for HP OfficeJet Pro 8600 rather than 8610.
I have an HP Officejet Pro 8620 and an 8615 (Sam's club badged 8610), both working on my home network with hplip-3.15.4-1.1.x86_64.
Attempted to upgrade hplip to 3.15.4 After a long time correcting dependencies, the process crashed in "make". That's enough. I'll send my printing needs to my Mac and print from there.
Thanks all.
Hi
Why not connect it to the apple router USB and use socket://
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 On 2015-06-15 03:24, Malcolm wrote:
Hi Why not connect it to the apple router USB and use socket://
then either use cups or hp-setup to connect....
That limits features to what the router supports. - -- Cheers / Saludos, Carlos E. R. (from 13.1 x86_64 "Bottle" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iF4EAREIAAYFAlV+K7EACgkQja8UbcUWM1xNMwD/dr452S1ydUwmVa7PG28yqDwL PDg/Mu27Rgp6AvcjBMwA/jymV9EV9T5Wgb1SW7muRnI7T9IyXygcUzielserFAGI =PsSz -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On Mon 15 Jun 2015 03:34:42 AM CDT, Carlos E. R. wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256
On 2015-06-15 03:24, Malcolm wrote:
Hi Why not connect it to the apple router USB and use socket://
then either use cups or hp-setup to connect.... That limits features to what the router supports.
Hi Not sure what limits your talking about, the router covers any usb printer or hard drive. I've got an apple airport extreme router here for testing, when I hooked up my old HP all-in-one scanner printer to the usb port on it, point a linux system at it port 9100 I see it fine. In the past I've hooked up a usb hub as well and connected drivers and printers, all can be seen via the router config tool and can be seen on the local network... Anyway, sounds like the issue is solved for the OP... -- Cheers Malcolm °¿° LFCS, SUSE Knowledge Partner (Linux Counter #276890) SUSE Linux Enterprise Desktop 12 GNOME 3.10.1 Kernel 3.12.39-47-default up 2 days 1:28, 4 users, load average: 0.24, 0.22, 0.22 CPU AMD A4-5150M APU @ 3.3GHz | GPU Richland Radeon HD 8350G -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 6/14/15 8:23 PM, Malcolm wrote:
On Mon 15 Jun 2015 03:34:42 AM CDT, Carlos E. R. wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256
On 2015-06-15 03:24, Malcolm wrote:
Hi Why not connect it to the apple router USB and use socket://
then either use cups or hp-setup to connect.... That limits features to what the router supports.
Hi Not sure what limits your talking about, the router covers any usb printer or hard drive.
I've got an apple airport extreme router here for testing, when I hooked up my old HP all-in-one scanner printer to the usb port on it, point a linux system at it port 9100 I see it fine.
In the past I've hooked up a usb hub as well and connected drivers and printers, all can be seen via the router config tool and can be seen on the local network...
Anyway, sounds like the issue is solved for the OP...
It is solved for the better. Patrick showed me how to get the IP address of the printer, and that pretty much solved it along with a few other items. Thanks all. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 2015-06-15 05:23, Malcolm wrote:
On Mon 15 Jun 2015 03:34:42 AM CDT, Carlos E. R. wrote:
That limits features to what the router supports.
Hi Not sure what limits your talking about, the router covers any usb printer or hard drive.
Last time I tried with a friend, there were limitations. From the documentation of a router here, a tp link TD-W8970. +++—-—-—-—-—-—-—-—- Before installing the print server, make sure you have the following devices and accessories: - Computer with Windows XP/ Vista/ 7/ 8 - USB printer and USB cable -* Note: (1) Before connection, please check the Printer Compatibility List to verify whether your printer is supported by the modem router. You can refer to Troubleshooting for downloading the Printer Compatibility List. (2) Make sure you have already installed the printer’s driver on your computer. Otherwise, please install it first. (3) Any computer in your LAN must first install the software if it wants to share the print server via the modem router. —-—-—-—-—-—-—-—-++- It appears there is a compatibility list, which in this case is here: http://www.tp-link.es/common/compatible/print-server/. Well, Tony's printer is not listed. The 8600 is, fully - but the list doesn't include Linux. There is this note: +++—-—-—-—-—-—-—-—- The USB Printer Controller supports Windows 7 32bit/64bit, Vista 32bit/64bit, XP 32/64bit and Mac OS currently. Windows users can get the USB Printer Controller from the CD attached to the product or download from our website. Mac users can get it from our website only. —-—-—-—-—-—-—-—-++-
I've got an apple airport extreme router here for testing, when I hooked up my old HP all-in-one scanner printer to the usb port on it, point a linux system at it port 9100 I see it fine.
In the past I've hooked up a usb hub as well and connected drivers and printers, all can be seen via the router config tool and can be seen on the local network...
HP printers usually provide a web page, via network, but not via USB, that allows doing many things with the printer. You would lose that, at least.
Anyway, sounds like the issue is solved for the OP...
Good! :-) [... reading ...] We told him several times. Get the IP for the router, which _must_ be fixed, tell YaST the address, or tell hp-setup the address. That's all! It is easy. -- Cheers / Saludos, Carlos E. R. (from 13.1 x86_64 "Bottle" at Telcontar)
On 6/14/15 6:24 PM, Malcolm wrote:
On Sun 14 Jun 2015 05:37:54 PM CDT, Tony Alfrey wrote:
On 6/14/15 4:38 PM, Patrick Shanahan wrote:
* Tony Alfrey
[06-14-15 19:15]: 1. HPLIP is installed, most up-to-date for 13.1, but not most up-to-date in general. So am using a driver for HP OfficeJet Pro 8600 rather than 8610.
I have an HP Officejet Pro 8620 and an 8615 (Sam's club badged 8610), both working on my home network with hplip-3.15.4-1.1.x86_64.
Attempted to upgrade hplip to 3.15.4 After a long time correcting dependencies, the process crashed in "make". That's enough. I'll send my printing needs to my Mac and print from there.
Thanks all.
Hi Why not connect it to the apple router USB and use socket://
then either use cups or hp-setup to connect....
Thanks, but I don't even know what any of this means; installing a printer is something that I need to do once every 10 years. I need a recipe. Patrick Shannon supplied a recipe and if I can fix the upgrade of hplip then I will try that. Carlos is adamant against using USB from the router to the printer. But so far, that approach at least recognizes the printer. Thanks! Tony Alfrey -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 On 2015-06-15 03:52, Tony Alfrey wrote:
Carlos is adamant against using USB from the router to the printer. But so far, that approach at least recognizes the printer.
Because you loose features. And you still need the proper driver. You have to: a) Connect the printer via network, and give it a fixed IP. b) Upgrade hplip, using YaST, not make, and the package from the Printing repo. It is plain simple click. c) Configure the printer, either using YaST, alternate setup for hp printers, or hp-setup. - -- Cheers / Saludos, Carlos E. R. (from 13.1 x86_64 "Bottle" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iF4EAREIAAYFAlV+MWEACgkQja8UbcUWM1x7RgD/eRDKH+LgQtY29b+xAO6BFn3h JDETJdmRCBeS6GRQL4EA/2XaWpne2Jt4ynRV/U3V4QErL01Xtr6Z0DEF81W6jLed =GhAi -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 6/14/15 4:38 PM, Patrick Shanahan wrote:
* Tony Alfrey
[06-14-15 19:15]: 1. HPLIP is installed, most up-to-date for 13.1, but not most up-to-date in general. So am using a driver for HP OfficeJet Pro 8600 rather than 8610.
I have an HP Officejet Pro 8620 and an 8615 (Sam's club badged 8610), both working on my home network with hplip-3.15.4-1.1.x86_64.
2. I am using the USB port on the router and the USB port on the linux box. This way I know the IP address of the router and Carlos say it's the same as the USB port on the router.
Unplug the usb, then query the router for the wireless address of the printer, or using the front screen of the printer to determine it's address.
3. In print queue setup in YAST, I try to print a test page, which fails. I click on "failed test page" and YAST gives a diagnostic window, says "printing job #___, printer is busy".
Do not use yast, as root from the cl use hp-setup select 2nd option "Network/Ethernet/Wireless...." select "Show Advanced Options" select "Manual Discovery" type the ip address in the window, leave the port as is. Next
You should be able to follow the rest on your own.
4. After I try this several times, the print queue contains several pending jobs. I delete them all and start again, with the same results.
5. I went on line and found this:
"You have selected SUSE Linux 13.1 using the HP Officejet Pro 8610 E-all-in-one Printer. SUSE Linux 13.1 supplies HPLIP 3.14.6 and it does support your printer. As the version of HPLIP supplied with your operating system supports your printer, you may continue to use that version of HPLIP."
so maybe I should not change. Any ideas of what is next?
Be sure to program subject router for "ip allocation" and assign the ip and mac address of your 8610 to "Fixed Allocation" or whatever language your brand router uses.
ps: I have also completed this task using yast with the router plugged usb to "computer" not router but should be no different. Also used yast to configure printers using wireless, but it is necessary to first *know* the ip address of the printer(s).
Patrick; My God, you did it. You actually did it. At least it prints a test page. I cannot thank you enough, I was certainly ready to bag this exercise. Again, Thank You!! Tony Alfrey -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Patrick;
My God, you did it. You actually did it. At least it prints a test page. I cannot thank you enough, I was certainly ready to bag this exercise.
Again, Thank You!!
Tony Alfrey
Everything works, all devices on the router LAN, no USB ports. Thank you! -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 On 2015-06-15 01:15, Tony Alfrey wrote:
1. HPLIP is installed, most up-to-date for 13.1, but not most up-to-date in general. So am using a driver for HP OfficeJet Pro 8600 rather than 8610.
It may suffice. I would try that, instead of updating hplip, for the moment.
2. I am using the USB port on the router and the USB port on the linux box. This way I know the IP address of the router and Carlos say it's the same as the USB port on the router.
NONONONO! You can connect your printer directly via USB to your computer, but then other machines will not be able to use it. So better do not do it. You may connect your printer via USB to your router, but I said DO NOT DO THIS! This feature is only intended for printers that do not support network directly! If you do this, you are limited by the limited support of your router. Don't do this! And no, I did not say that "it's the same as the USB port on the router."
3. In print queue setup in YAST, I try to print a test page, which fails. I click on "failed test page" and YAST gives a diagnostic window, says "printing job #___, printer is busy".
4. After I try this several times, the print queue contains several pending jobs. I delete them all and start again, with the same results.
Don't try printing a page till your printer is installed.
5. I went on line and found this:
"You have selected SUSE Linux 13.1 using the HP Officejet Pro 8610 E-all-in-one Printer. SUSE Linux 13.1 supplies HPLIP 3.14.6 and it does support your printer. As the version of HPLIP supplied with your operating system supports your printer, you may continue to use that version of HPLIP."
13.1 has 3.13.10. The printing repo for 13.1 has 3.15.4, so if you decide to update hplip, use that one. From the Printing repo.
so maybe I should not change. Any ideas of what is next?
See my previous post, it explains all the procedure. - -- Cheers / Saludos, Carlos E. R. (from 13.1 x86_64 "Bottle" (Minas Tirith)) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iF4EAREIAAYFAlV+EzEACgkQja8UbcUWM1w9oQD+LzBuYrIqPbUsB5nE2TMKk6u1 G5FY3Yq7b8G9Ko+ePJAA/RiqFy7tg8ZaJVsnEX78BTzr9xf+n9WqyB8sALRrkzdM =nfGJ -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Tony Alfrey composed on 2015-06-13 23:26 (UTC-0400):
I have a simple network
Apple Wireless router from comcast modem. Wireless bridge to a second Apple wireless router. This bridge has ethernet to SuSE 13.1 linux box. This bridge has USB connector to new HP printer. Also can connect one of several ethernet ports on bridge to HP printer.
Wireless Mac talks to Linux box, Wireless Mac talks to printer.
Cannot configure printer to communicate with Linux box, Linux box does not see printer in YAST. What is the transparent way to set up a printer on a Linux box?
I would not describe such a configuration as "simple". Whatever it is, it almost certainly does not include having USB and any kind of network connection configured simultaneously. I rather doubt both simultaneously is possible on any printer in the SRP<$500 class, including your HP OfficeJet Pro 8610, if in any class regardless of age or brand. YaST2 could not find my brand new Brother printer last week either, until I typed in the printer's IP in YaST2. I assigned the printer a fixed IP. To get make that assignment, I used my new printer's setup panel to discover the IP assigned via DHCP, then opened printer setup by typing that IP into Firefox, after which I changed the IP to my choice of IP outside the DHCP range of the router. -- "The wise are known for their understanding, and pleasant words are persuasive." Proverbs 16:21 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
participants (9)
-
buhorojo
-
Carlos E. R.
-
Felix Miata
-
Greg Freemyer
-
Malcolm
-
Patrick Shanahan
-
Ruben Safir
-
Tony Alfrey
-
Yamaban