On Saturday 20 October 2007 11:38:16 pm Jim Flanagan wrote: ...
So, thinking that it must be a 10.3 issue, I installed 2 different distros (something I had never done before). Pclinuxos and zenwalk both run fine in gui, pclinuxos is running at 1280x1024 at 60hz. I don't recall what zenwalk ran at, but it was higher than that.
So, to me this must be a 10.3 issue. If I'm on the wrong track guys please let me know. I'm not at all sure what to do next as I've never seen a problem where nothing you try works.
.... Sax2.log ---------
19-Oct 10:11:15 <I> [ Sysp: Server detection data Card0 => DomainId : 0x0 Card0 => BusId : 0x2 Card0 => SlotId : 0x00 Card0 => FuncId : 0x0
# Which is 2:0:0 xorg.conf ---------
Section "Device" BoardName "RV250 If" BusID "2:0:0"
# and that is written in configuration Xorg.0.log: --------- ...
(II) PCI: PCI scan (all values are in hex) ... (II) PCI: 02:00:1: chip 1002,496e card 1002,2003 rev 01 class 03,80,00 hdr 00
# PCI: 02:00:1 ??
(II) PCI: End of PCI scan ... (II) Primary Device is: PCI 02:00:0 (WW) fglrx: No matching Device section for instance (BusID PCI:2:0:1) found
# sax2 and Xorg see different BusID's. That can be xorg or sax2. You may try to change manually xorg.conf line: BusID "2:0:0" to BusID "2:0:1" and see if that helps. If you have multiboot, it will be fine if you can supply head var/log/Xorg.0.log for all distros. You can snip output below 'Current Operating System:' line. That will tell what version of X Window System they use. It will be interesting to see what nvidia Xorg.0.log tells. BTW, do you have any other Xorg logs in /var/log/ -- Regards, Rajko. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org