dear list, I am having a HARD time installing suse 9.3 on a brand new Proliant DL320 G3 with SATA RAID 1. After enabling raid1 in the bios, creating an array, and creating a logical drive in the array (230 gig) suse installation does NOT see a harddisk. Bios messages during post indicate that all is fine: it sees the array, it sees one logical drive in the array, but in the suse installer partitioning fails, because there are no drives to install on. The sata/raid adapter is an Intel ICH6R/ICH6RW, and I found out that this is so called 'fakeraid'. I had never heard of this. (until now I have only used IBM ServeRAID SCSI) Anyway, how to proceed? Is root raid1 possible on this hardware? Anyone doing it, here? (http://linuxmafia.com/faq/Hardware/sata.html#intel-ich6) I went to the hp website, there are driver downloads, but all for SuSE Enterprise Server. I DON'T have the enterprise server, but regular 9.3 or 10. Is there anyone here who knows how to get this going? Am I trying to do the impossible? The server IS certified for linux, I checked that, before I bought it... Anyway, really all suggestions are welcome! Thanks in advance! Mourik Jan