29 Sep
2009
29 Sep
'09
18:19
On Tue, 2009-09-29 at 13:29 -0400, Mike wrote: > On September 29, 2009, Mark Misulich wrote: > > > I see a few differences between our config files > > DEVICE='eth0' > - I don't have this one > > BOOTPROTO='dhcp4' > BOOTPROTO='dhcp' > > ONBOOT='yes' > - I don't have this one > > > BROADCAST='' > > ETHTOOL_OPTIONS='' > > IPADDR='' > > MTU='' > > NAME='RTL8101E/RTL8102E PCI Express Fast Ethernet controller' > > NETMASK='' > > NETWORK='' > > REMOTE_IPADDR='' > > STARTMODE='auto' > the above all match, except we have different realtek cards > > > USERCONTROL='yes' > USERCONTROL='no' > > IFPLUGD_PRIORITY='20' > - I don't have this one > > What does ifconfig show? ifconfig shows the same exact readout before and after I activate the card with yast. > With the wrong driver mine appears to work but is unable to receive. > The system tries to load the r8169 driver and I have to force the 8168 > instead. The readme file on my driver says to remove it using the following: Check to see if the r8169 module is installed: #lsmod | grep r8169 If there is a readout, remove it using: #rmmod r8169 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org