On Mon, 28 Oct 2002, Paul Reeves wrote:
I had a similar problem with a CDROM driver as master and a UDMA hard drive as slave. The combination worked fine under SuSE 7.3. When I installed 8.1 everything went pear shaped as soon as I started using the IDE drive. (The main system is running off a SCSI drive). I reckon that you need to set ide=nodma at boot time. That fixed it for me.
I tried "ide=nodma" at boot time, it didn't help. I also tried changing the "force dma" in /etc/sysctl/hardware with no sucess. hdparm gives the following results: /dev/hda: using_dma = 0 (off) /dev/hdb: using_dma = 0 (off) /dev/hdc: using_dma = 0 (off) (hdc is my cdrw) I have read about the SuSE Installation support you get when you buy a boxed set. But as i understand it, they don't help you don't do a typical workstation installation. As I currently use atleast two harddrives, one for the system and one for home directories, I'm not doing a "typical workstation" installation. -- Henrik Karlsson | www.henriks.org Studying Automation Engineering | ICQ: UIN 2785561 at Chalmers University of Technology | +46-707-99 50 31 "Coughlin's law - anything else is always something better."