2008/3/10, Eberhard Roloff
What I try in cases like this. Get Knoppix and start with "knoppix dma screen=1680x1050" If this works ok, simply get the xorg.conf file from knoppix and try this one on opensuse. Recntly I tried with 1600x1200 and it worked.
regards
Eberhard
Well, have to download it.... Meanwhile, this is an extract from Xorg.0.log where the lcd panel gets detected...: --------------- (II) NV(0): I2C bus "DDC" initialized. (II) NV(0): Probing for analog device on output A... (--) NV(0): ...can't find one (II) NV(0): Probing for analog device on output B... (--) NV(0): ...found one (II) NV(0): Probing for EDID on I2C bus A... (II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) NV(0): I2C device "DDC:ddc2" removed. (II) NV(0): ... none found (II) NV(0): Probing for EDID on I2C bus B... (II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) NV(0): I2C device "DDC:ddc2" removed. (--) NV(0): DDC detected a DFP: (II) NV(0): Manufacturer: GSM Model: 4e3e Serial#: 27401 (II) NV(0): Year: 2006 Week: 12 (II) NV(0): EDID Version: 1.3 (II) NV(0): Digital Display Input (II) NV(0): Max H-Image Size [cm]: horiz.: 43 vert.: 27 (II) NV(0): Gamma: 2.20 (II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) NV(0): First detailed timing is preferred mode (II) NV(0): redX: 0.640 redY: 0.340 greenX: 0.290 greenY: 0.615 (II) NV(0): blueX: 0.145 blueY: 0.070 whiteX: 0.313 whiteY: 0.329 (II) NV(0): Supported VESA Video Modes: (II) NV(0): 720x400@70Hz (II) NV(0): 640x480@60Hz (II) NV(0): 640x480@75Hz (II) NV(0): 800x600@56Hz (II) NV(0): 800x600@60Hz (II) NV(0): 800x600@75Hz (II) NV(0): 832x624@75Hz (II) NV(0): 1024x768@60Hz (II) NV(0): 1024x768@75Hz (II) NV(0): 1280x1024@75Hz (II) NV(0): 1152x870@75Hz (II) NV(0): Manufacturer's mask: 0 (II) NV(0): Supported Future Video Modes: (II) NV(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) NV(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) NV(0): Supported additional Video Mode: (II) NV(0): clock: 108.0 MHz Image Size: 434 x 270 mm (II) NV(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 (II) NV(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 (II) NV(0): Supported additional Video Mode: (II) NV(0): clock: 119.0 MHz Image Size: 434 x 270 mm (II) NV(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0 (II) NV(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0 (II) NV(0): Ranges: V min: 56 V max: 85 Hz, H min: 28 H max: 83 kHz, PixClock max 140 MHz (II) NV(0): Monitor name: L203WT (II) NV(0): EDID (in hex): (II) NV(0): 00ffffffffffff001e6d3e4e096b0000 (II) NV(0): 0c100103ee2b1b78eac605a3574a9d25 (II) NV(0): 125054a76b808180714f010101010101 (II) NV(0): 010101010101302a009851002a403070 (II) NV(0): 1300b20e1100001e7c2e90a0601a1e40 (II) NV(0): 30203600b20e11000000000000fd0038 (II) NV(0): 551c530e000a202020202020000000fc (II) NV(0): 004c32303357540a2020202020200064 (--) NV(0): CRTC 0 is currently programmed for DFP (**) NV(0): Forcing display type to DFP as specified (II) NV(0): Using DFP on CRTC 0 (--) NV(0): Panel size is 1280 x 1024 (II) NV(0): DDCModeFromDetailedTiming: 1680x1050 Warning: We only handle seperate sync. (II) NV(0): Using EDID range info for horizontal sync (II) NV(0): Using EDID range info for vertical refresh (II) NV(0): Printing DDC gathered Modelines: (II) NV(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (II) NV(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (II) NV(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (II) NV(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (II) NV(0): Modeline "720x400" 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (II) NV(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (II) NV(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (II) NV(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (II) NV(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (II) NV(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (II) NV(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (II) NV(0): Modeline "1280x1024" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (II) NV(0): Modeline "1152x864" 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync (II) NV(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (II) NV(0): Modeline "1680x1050" 119.00 1680 1728 1760 1840 1050 1053 1059 1080 -hsync -vsync (II) NV(0): Panel is TMDS (--) NV(0): VideoRAM: 262144 kBytes (==) NV(0): Using gamma correction (1.0, 1.0, 1.0) (II) NV(0): Monitor[0]: Using hsync range of 28.00-83.00 kHz (II) NV(0): Monitor[0]: Using vrefresh range of 56.00-85.00 Hz (II) NV(0): Clock range: 12.00 to 400.00 MHz -------------------------------------------- And later I get this... ------------ (II) NV(0): Not using driver mode "1680x1050" (exceeds panel dimensions) (II) NV(0): Not using mode "1680x1050" (no mode of this name) (II) NV(0): Not using mode "1600x1024" (no mode of this name) (II) NV(0): Not using mode "1600x1000" (no mode of this name) (II) NV(0): Not using mode "1400x1050" (no mode of this name) (II) NV(0): Not using mode "1440x900" (no mode of this name) (II) NV(0): Not using mode "1366x768" (no mode of this name) (II) NV(0): Not using mode "1280x800" (no mode of this name) (II) NV(0): Not using mode "1280x768" (no mode of this name) (II) NV(0): Not using mode "1280x600" (no mode of this name) (II) NV(0): Not using mode "1024x600" (no mode of this name) (II) NV(0): Not using mode "768x576" (no mode of this name) (--) NV(0): Virtual size is 1280x1024 (pitch 1280) ------------ CI.- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org