I have two identical Western Digital 1TB SATA2 drives, which I am trying to set up as a RAID1 array. They are attached to a Sil 3124 PCI-X SATA Controller. On booting the machine, pressing F4 gets me to the controller card's setup screen, where I can create, destroy and repair RAIDs. I chose to create a RAID1 array, which duly appeared in the list of logical drives on this screen. I was then asked if I wanted to mirror them now or later, so I chose now. It took hours :(. Continuing the boot process, I expected the OS (openSUSE 10.3) to see only the logical drive, but YaST partitioner reported two new Western Digital drives, /dev/sdf and /dev/sdg. I can combine them into a software RAID, but that seems wasteful and redundant, given that I've spent GBP85 on a hardware controller. I've searched through the /dev directory, and can't see anything that suggest the logical drive. Suggestions welcomed, though I know you're all busy upgrading to 11.0 ;) That's my next job. Bob -- Bob Registered Linux User #463880 GPG-FP: A6C1 457C 6DBA B13E 5524 F703 D12A FB79 926B 994E openSUSE 10.3, Kernel 2.6.22.17-0.1-default, KDE 3.5.7 Intel Celeron 2.53GB, 2GB DDR RAM, nVidia GeForce 7600GS -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org