Ken Schneider wrote:
On Thu, 2005-05-12 at 00:48 +0800, Ronald Wiplinger wrote:
I have installed SuSE 9.2 pro on an Athlon with IDE hard disk.
I got some problems with my motherboard Gigabyte GA-K8NXP-9
1. my USB memory stick is not recognized:
Did you by chance update the kernel and forget to reboot? It has happened to the best of us.
Reboot helped a lot, .... (I did not recognize that with the first update also the kernel was updated) Floppy and USB are recognized now. However the Ethernet port eth0 is mentioned in the dmesg, but not used 190:forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.29. 192:eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:0a.0 -- 219-(C)Copyright 1999-2004 Marvell(R). 220-PCI: Setting latency timer of device 0000:02:00.0 to 64 221:eth1: Marvell Yukon 88E8053 Gigabit Ethernet Controller 222- PrefPort:A RlmtMode:Check Link State 223-ieee1394: Host added: ID:BUS[0-00:1023] GUID[000fea56008bef3e] -- 233-ip_conntrack version 2.1 (4095 buckets, 32760 max) - 480 bytes per conntrack 234-ip6_conntrack version 0.1 (4095 buckets, 32760 max) - 312 bytes per conntrack 235:eth1: network connection up using port A 236- speed: 100 237- autonegotiation: yes -- 242- rx-polling: enabled 243-Disabled Privacy Extensions on device 000001003be66800(sit0) 244:eth1: no IPv6 routers present 245-PCI: Setting latency timer of device 0000:00:04.0 to 64 246-intel8x0_measure_ac97_clock: measured 49924 usecs -- 266:eth1: -- ERROR -- 267- Class: Hardware failure 268- Nr: 0x271 -- 305:eth0: no link during initialization. 306:eth0: no IPv6 routers present 307-PCI: Setting latency timer of device 0000:00:04.0 to 64 bye Ronald