I'm looking for the device name for my PCMCIA hard drive so I can fdisk it, without success. I'm running Suse 8.1 Pro. Here's my boot message: Linux version 2.4.19-4GB (root@Pentium.suse.de) (gcc version 3.2) #1 Fri Sep 13 13:14:56 UTC 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000013ec0000 (usable) BIOS-e820: 0000000013ec0000 - 0000000013ef8000 (ACPI data) BIOS-e820: 0000000013ef8000 - 0000000013f00000 (ACPI NVS) BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Scanning bios EBDA for MXT signature 318MB LOWMEM available. ACPI: have wakeup address 0xc0001000 Advanced speculative caching feature not present On node 0 totalpages: 81600 zone(0): 4096 pages. zone(1): 77504 pages. zone(2): 0 pages. ACPI: RSDP (v000 AMI ) @ 0x000ff980 ACPI: RSDT (v001 CAYMAN 8C1A100A 08193.00802) @ 0x13ef0000 ACPI: FADT (v001 CAYMAN 8C1A100A 08193.00802) @ 0x13ef1000 ACPI: MADT not present Building zonelist for node : 0 Kernel command line: root=/dev/hda3 hdc=ide-scsi ide_setup: hdc=ide-scsi Initializing CPU#0 Detected 548.341 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1094.45 BogoMIPS Memory: 319272k/326400k available (1553k kernel code, 6740k reserved, 416k data, 152k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 CPU: Common caps: 0383f9ff 00000000 00000000 00000000 CPU: Intel Pentium III (Coppermine) stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20020829 PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=1 PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/2410] at 00:1f.0 PCI: Found IRQ 11 for device 01:0b.0 PCI: Sharing IRQ 11 with 00:1f.2 PCI: Found IRQ 11 for device 01:0b.1 PCI: Sharing IRQ 11 with 00:01.0 PCI: Sharing IRQ 11 with 01:08.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16) apm: overridden by ACPI. mxt_scan_bios: enter Starting kswapd bigpage subsystem: allocated 0 bigpages (=0MB). kinoded started VFS: Diskquotas version dquot_6.5.0 initialized aio_setup: num_physpages = 20400 aio_setup: sizeof(struct page) = 48 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A PCI: Found IRQ 11 for device 01:08.0 PCI: Sharing IRQ 11 with 00:01.0 PCI: Sharing IRQ 11 with 01:0b.1 Redundant entry in serial pci_table. Please send the output of lspci -vv, this message (131f,2000,131f,2000) and the manufacturer and name of serial board or modem board to serial-pci-info@lists.sourceforge.net. ttyS04 at port 0xdfa0 (irq = 11) is a 16550A Real Time Clock Driver v1.10e Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH: IDE controller on PCI bus 00 dev f9 ICH: chipset revision 2 ICH: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA PDC20267: IDE controller on PCI bus 01 dev 50 PCI: Found IRQ 9 for device 01:0a.0 PCI: Sharing IRQ 9 with 01:07.0 PDC20267: chipset revision 2 PDC20267: not 100% native mode: will probe irqs later PDC20267: ROM enabled at 0xff8d0000 PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. ide2: BM-DMA at 0xdf00-0xdf07, BIOS settings: hde:DMA, hdf:pio ide3: BM-DMA at 0xdf08-0xdf0f, BIOS settings: hdg:DMA, hdh:pio hda: Maxtor 6E040L0, ATA DISK drive hdc: Hewlett-Packard DVD Writer 100, ATAPI CD/DVD-ROM drive hdd: ATAPI CDROM, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 blk: queue c037be64, I/O limit 4095Mb (mask 0xffffffff) hda: safely enabled flush hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=4998/255/63, UDMA(66) ide-floppy driver 0.99.newide Partition check: hda: hda1 hda2 hda3 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize loop: loaded (max 16 devices) Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. ide-floppy driver 0.99.newide SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 218k freed VFS: Mounted root (ext2 filesystem). hdc: no flushcache support hdd: no flushcache support scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: HP Model: DVD Writer 100j Rev: 1.37 Type: CD-ROM ANSI SCSI revision: 02 Vendor: Model: ATAPI CDROM Rev: 2.20 Type: CD-ROM ANSI SCSI revision: 02 sd_attach() sd_attach() reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (ide0(3,3)) for (ide0(3,3)) reiserfs: using ordered data mode Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 152k freed md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. LVM version 1.0.5(mp-v6)(15/07/2002) module loaded Adding Swap: 642592k swap-space (priority 42) MSDOS FS: IO charset iso8859-1 Linux Tulip driver version 0.9.15-pre11 (May 11, 2002) PCI: Found IRQ 10 for device 01:09.0 PCI: Sharing IRQ 10 with 00:1f.3 eth0: ADMtek Comet rev 17 at 0xd800, 00:04:5A:72:C0:92, IRQ 10. usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 13:53:01 Sep 13 2002 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 11 for device 00:1f.2 PCI: Sharing IRQ 11 with 01:0b.0 PCI: Setting latency timer of device 00:1f.2 to 64 usb-uhci.c: USB UHCI at I/O 0xef80, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver uhci.c: USB Universal Host Controller Interface driver v1.1 sg: find_free_slot ...<7>sg: initializing sg_major_array ...<4>sg: allocated major 21 sg: ... found 15:00 sg_attach: dev0=(21:0) sg: find_free_slot ...<7>sg: ... found 15:01 sg_attach: dev1=(21:1) Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0 sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 sr1: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Enabling device 01:0b.1 (0000 -> 0002) PCI: Found IRQ 11 for device 01:0b.1 PCI: Sharing IRQ 11 with 00:01.0 PCI: Sharing IRQ 11 with 01:08.0 PCI: Enabling device 01:0b.0 (0000 -> 0002) PCI: Found IRQ 11 for device 01:0b.0 PCI: Sharing IRQ 11 with 00:1f.2 Yenta IRQ list 0000, PCI irq11 Socket status: 10000006 Yenta IRQ list 0000, PCI irq11 Socket status: 10000010 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0820-0x08ff: excluding 0x820-0x87f cs: IO port probe 0x0800-0x080f: excluding 0x800-0x80f cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x400-0x47f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. PCI: Found IRQ 9 for device 01:07.0 PCI: Sharing IRQ 9 with 01:0a.0 IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] parport0: Printer, HEWLETT-PACKARD DESKJET 850C lp0: using parport0 (polling). usb.c: registered new driver serial usbserial.c: USB Serial support registered for Generic usbserial.c: USB Serial Driver core v1.4 eth0: no IPv6 routers present isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found cdrom: open failed. ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 64 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 66 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 68 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 70 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 72 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 74 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 76 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 78 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 261M agpgart: Detected an Intel i810 E Chipset. agpgart: detected 4MB dedicated video ram. agpgart: AGP aperture is 64M @ 0xf8000000 [drm] AGP 0.99 on Intel i810 @ 0xf8000000 64MB [drm] Initialized i810 1.2.0 20010920 on minor 0 Linux video capture interface: v1.00 ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A ide-scsi: hdd: unsupported command in request queue (0) end_request: I/O error, dev 16:40 (hdd), sector 0 ide-scsi: hdd: unsupported command in request queue (0) end_request: I/O error, dev 16:40 (hdd), sector 2 ide-scsi: hdd: unsupported command in request queue (0) end_request: I/O error, dev 16:40 (hdd), sector 4 ide-scsi: hdd: unsupported command in request queue (0) end_request: I/O error, dev 16:40 (hdd), sector 6 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 0 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 2 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 4 ide-scsi: hdc: unsupported command in request queue (0) end_request: I/O error, dev 16:00 (hdc), sector 6 ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE.