Hi, thanks for answer. Are you familiar about that complains ? Are that errors or only "info" that some command is unknown to hpsa array ? If I could ignore them or not. I found that "sda" replaced "ccis" from some kernel - I use kernel: Linux kostnew 2.6.37.6-0.11-desktop #1 SMP PREEMPT 2011-12-19 23:39:38 +0100 x86_64 x86_64 x86_64 GNU/Linux Thank you very much J.K. Per Jessen píše v Út 10. 04. 2012 v 08:51 +0200:
Josef Karliak wrote:
Good morning, in system log I've found some complains: Apr 10 08:06:53 kostnew kernel: [ 649.402046] hpsa 0000:05:00.0: cp ffff880037900000 has check condition: unknown type: Sense: 0x5, ASC: 0x24, ASCQ: 0x0, Returning result: 0x2, cmd=[1a 00 1c 00 40 00 00 00 00 00 00 00 00 00 00 00] Apr 10 08:06:53 kostnew kernel: [ 649.420465] hpsa 0000:05:00.0: cp ffff880037900000 has check condition: unknown type: Sense: 0x5, ASC: 0x24, ASCQ: 0x0, Returning result: 0x2, cmd=[1a 00 1c 00 40 00 00 00 00 00 00 00 00 00 00 00] Apr 10 08:06:53 kostnew kernel: [ 649.438721] hpsa 0000:05:00.0: cp ffff880037900000 has check condition: unknown type: Sense: 0x5, ASC: 0x24, ASCQ: 0x0, Returning result: 0x2, cmd=[1a 00 1c 00 40 00 00 00 00 00 00 00 00 00 00 00] Apr 10 08:11:53 kostnew kernel: [ 949.125037] hpsa 0000:05:00.0: cp ffff880037900000 has check condition: unknown type: Sense: 0x5, ASC: 0x24, ASCQ: 0x0, Returning result: 0x2, cmd=[1a 00 1c 00 40 00 00 00 00 00 00 00 00 00 00 00] Apr 10 08:11:53 kostnew kernel: [ 949.138095] hpsa 0000:05:00.0: cp ffff880037900000 has check condition: unknown type: Sense: 0x5, ASC: 0x24, ASCQ: 0x0, Returning result: 0x2, cmd=[1a 00 1c 00 40 00 00 00 00 00 00 00 00 00 00 00] Apr 10 08:11:53 kostnew kernel: [ 949.151090] hpsa 0000:05:00.0: cp ffff880037900000 has check condition: unknown type: Sense: 0x5, ASC: 0x24, ASCQ: 0x0, Returning result: 0x2, cmd=[1a 00 1c 00 40 00 00 00 00 00 00 00 00 00 00 00]
hpsa is a driver module from HP for their Smartarray controllers.
There are 2x146GB sas disks in the mirror, before update by "you" I've removed one disk (as a point to return :) ) and made update. There were not kernel update, only some flash, mozilla or so. But the complains started . Tried to restart, power off (removed power cables too) and took another 146GB sas disk into a bay. I'm out of ideas. Anyway - on the HP web are some links to decode that complains. But I do not use tape. Also remove "hpsa" module from "/etc/sysconfig/kernel" - not helped...
If you removed it from INITRD_MODULES, it would only affect the initrd and only when it is (re-)built. Also, I guess you actually want to ue that driver.
Any suggestions or kick me to the right way ?
HP support? Or maybe revert to the cciss module? Upgrade the firmware on the controller and the drives.
-- Per Jessen, Zürich (8.6°C)