November 2021 - openSUSE Users - openSUSE Mailing Lists

internet security
by Douglas McGarrett 21 Nov '21

21 Nov '21

Recently credit cards were hacked, and I had to get replacements. Today found an item charged to my name with a shipping address in North Carolina! (I'm in New York.) Is there a recommendation for software that can protect against this, and if so, what is it? (I looked at ESET, which comes highly recommended, but when I went to sign up, was given only Windows, Mac, and Android OSes to pick. Also says end of life second quarter of 2022. Is this something that can be protected by software, and if so, what software? Running Leap 15.3. --doug

8 16

Update-problem 15.2 -> 15.3
by hermann-Josef Beckers 21 Nov '21

21 Nov '21

Trying above update with the lokal installed oss-13.2-DVD image as only active repository. First try with "zypper -v dup" stop because of a full /var directory. created a /varnew double the size of /var, copied /var /varnew, edited /etc/fstab to point /var to the new partition and rebooted. Second try "zypper -v dup" results in the erro messages listed below. Can I retry and ignore the error? ( 311/2460) Installing: kernel-default-5.3.18-57.3.x86_64 ................[done] Additional rpm output: Creating initrd: /boot/initrd-5.3.18-57-default dracut: Executing: /usr/bin/dracut --logfile /var/log/YaST2/mkinitrd.log --force /boot/initrd-5.3.18-57-default 5.3.18-57-default dracut: Turning off host-only mode: '/sys' is not mounted! dracut: Turning off host-only mode: '/proc' is not mounted! dracut: Turning off host-only mode: '/run' is not mounted! dracut: Turning off host-only mode: '/dev' is not mounted! dracut: dracut module 'fcoe' will not be installed, because command 'dcbtool' could not be found! dracut: dracut module 'fcoe' will not be installed, because command 'fipvlan' could not be found! dracut: dracut module 'fcoe' will not be installed, because command 'lldpad' could not be found! dracut: dracut module 'fcoe' will not be installed, because command 'fcoemon' could not be found! dracut: dracut module 'fcoe' will not be installed, because command 'fcoeadm' could not be found! dracut: dracut module 'fcoe-uefi' will not be installed, because command 'dcbtool' could not be found! dracut: dracut module 'fcoe-uefi' will not be installed, because command 'fipvlan' could not be found! dracut: dracut module 'fcoe-uefi' will not be installed, because command 'lldpad' could not be found! dracut: dracut module 'nbd' will not be installed, because command 'nbd-client' could not be found! dracut: dracut module 'nvmf' will not be installed, because command 'nvme' could not be found! dracut: dracut module 'biosdevname' will not be installed, because command 'biosdevname' could not be found! dracut: *** Including module: bash *** dracut: *** Including module: systemd *** dracut: *** Including module: systemd-initrd *** dracut: *** Including module: modsign *** dracut: *** Including module: rdma *** dracut: *** Including module: i18n *** dracut: *** Including module: network-legacy *** dracut: *** Including module: network *** dracut: *** Including module: drm *** dracut: *** Including module: plymouth *** dracut: *** Including module: btrfs *** dracut: *** Including module: crypt *** dracut: *** Including module: dm *** dracut: Skipping udev rule: 64-device-mapper.rules dracut: Skipping udev rule: 60-persistent-storage-dm.rules dracut: Skipping udev rule: 55-dm.rules dracut: *** Including module: dmraid *** dracut: *** Including module: kernel-modules *** dracut: *** Including module: kernel-modules-extra *** dracut: *** Including module: kernel-network-modules *** dracut: *** Including module: lvm *** dracut: Skipping udev rule: 64-device-mapper.rules dracut: Skipping udev rule: 56-lvm.rules dracut: Skipping udev rule: 60-persistent-storage-lvm.rules dracut: *** Including module: mdraid *** dracut: Skipping udev rule: 64-md-raid.rules dracut: *** Including module: multipath *** dracut: Skipping udev rule: 40-multipath.rules dracut: *** Including module: nvdimm *** dracut: *** Including module: qemu *** dracut: *** Including module: qemu-net *** dracut: *** Including module: cifs *** dracut: *** Including module: iscsi *** dracut: *** Including module: lunmask *** dracut: *** Including module: nfs *** /usr/lib/dracut/modules.d/95nfs/module-setup.sh: line 39: findmnt: command not found /usr/lib/dracut/modules.d/95nfs/module-setup.sh: line 43: findmnt: command not found dracut: *** Including module: resume *** dracut: *** Including module: rootfs-block *** /usr/lib/dracut/dracut-functions.sh: line 314: findmnt: command not found /usr/lib/dracut/dracut-functions.sh: line 335: findmnt: command not found dracut: *** Including module: suse-btrfs *** dracut: *** Including module: suse-xfs *** dracut: *** Including module: terminfo *** dracut: *** Including module: udev-rules *** dracut: Skipping udev rule: 40-redhat.rules dracut: Skipping udev rule: 50-firmware.rules dracut: Skipping udev rule: 50-udev.rules dracut: Skipping udev rule: 91-permissions.rules dracut: Skipping udev rule: 80-drivers-modprobe.rules dracut: *** Including module: dracut-systemd *** dracut: *** Including module: haveged *** dracut: *** Including module: ostree *** dracut: *** Including module: usrmount *** dracut: *** Including module: base *** dracut: *** Including module: fs-lib *** dracut: *** Including module: shutdown *** dracut: *** Including module: suse *** dracut: *** Including module: suse-initrd *** dracut-install: ERROR: installing 'ecb' dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.szUR33/initramfs -N i2o_scsi --kerneldir /lib/modules/5.3.18-57-default/ -m ehci-hcd ehci-hcd crc32c des ecb md4 md5 hmac arc4 nls_utf8 cxgb4 dracut: *** Including modules done *** dracut: *** Installing kernel module dependencies *** dracut: *** Installing kernel module dependencies done *** dracut: *** Resolving executable dependencies *** dracut: *** Resolving executable dependencies done *** dracut: *** Hardlinking files *** dracut: *** Hardlinking files done *** dracut: *** Stripping files *** dracut: *** Stripping files done *** dracut: *** Generating early-microcode cpio image *** dracut: *** Constructing AuthenticAMD.bin *** dracut: *** Constructing GenuineIntel.bin *** dracut: *** Store current command line parameters *** dracut: Stored kernel commandline: dracut: rd.driver.pre=scsi_dh_alua rd.driver.pre=scsi_dh_emc rd.driver.pre=scsi_dh_rdac rd.driver.pre=dm_multipath dracut: *** Creating image file '/boot/initrd-5.3.18-57-default' *** ( 312/2460) Removing kernel-default-5.3.18-lp152.98.1.x86_64 ............[error] Removal of (4629)kernel-default-5.3.18-lp152.98.1.x86_64(@System) failed: Error: Subprocess failed. Error: RPM failed: /var/tmp/rpm-tmp.vkNMnT: line 1: /usr/lib/module-init-tools/kernel-scriptlets/rpm-preun: No such file or directory error: %preun(kernel-default-5.3.18-lp152.98.1.x86_64) scriptlet failed, exit status 127 error: kernel-default-5.3.18-lp152.98.1.x86_64: erase failed Abort, retry, ignore? [a/r/i] (a): a Warning: %posttrans scripts skipped while aborting: coreutils-8.32-1.2.x86_64.rpm rpm-4.14.1-29.46.x86_64.rpm ca-certificates-mozilla-2.44-9.6.1.noarch.rpm systemd-presets-common-SUSE-15-8.6.1.noarch.rpm login_defs-4.8.1-2.43.noarch.rpm systemd-presets-branding-openSUSE-12.2-lp153.2.37.noarch.rpm blog-2.20-2.1.x86_64.rpm shadow-4.8.1-2.43.x86_64.rpm dbus-1-1.12.2-8.3.1.x86_64.rpm kbd-2.0.4-14.38.x86_64.rpm util-linux-2.36.2-2.29.x86_64.rpm openSUSE-release-15.3-lp153.138.1.x86_64.rpm kmod-28-2.1.x86_64.rpm udev-246.13-5.1.x86_64.rpm dracut-049.1+suse.188.gbf445638-3.30.1.x86_64.rpm Problem occurred during or after installation or removal of packages: Installation has been aborted as directed. Please see the above error message for a hint.

5 17

[oS-en] Firefox will not start.
by Carlos E. R. 20 Nov '21

20 Nov '21

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 In one machine, running Leap 15.2, Firefox does not display. It runs, asks what profile to start, but never opens. I have just updated the machine. I can open it in safe mode. It asks if I want to refresh the profile, I say yes, and it opens. It keeps my tabs. Add ons are gone (there was only one, an add blocker). I close it and try to start it normally, but does not. I have to kill it. Gone through this three or four times. What is going on? How do I find out? Video is Intel. I try to create a new profile. Dialog pops up, says to click next, but the buttons are half way out the bottom of the window and I can not read them. I try to rename the resulting profile, but does not obey the keys to type a new name. I manage to delete it. Create new profile again, this time the next key displays properly. I have to hit it twice. Try to rename it, impossible. Nevertheless, that new profile fails to display, I have to kill it. Trying to downgrade firefox from 91 to 78. Says I have to create a new profile because bookmarks have been migrated :-( (does it create a backup of the profile when it migrates?) But at least it runs. Maybe I can find the list of opened tabs somewhere in the old profile. - -- Cheers Carlos E. R. (from 15.2 x86_64 at Telcontar) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCYXPxdxwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVZtkAn1cF01TyQETBA+WHlnMM 7izFejg8AJ9lsH6V51WuSm04YgtrHdNw3Hw7Bg== =+io4 -----END PGP SIGNATURE-----

2 3

xTuple anyone?
by Lew Wolfgang 17 Nov '21

17 Nov '21

Hi Folks, I've been asked to look into hosting an xTuple server, an ERP system. The docs look like it supports Ubuntu and Debian, but no mention of RPM-based distros. Does anyone have any experience with xTuple and can offer some pointers? Would I even have a chance to host it on Leap? Thanks in advance, Lew

1 0

Raid rebuild on every reboot?
by Klaus Vink Slott 15 Nov '21

15 Nov '21

Hi. I use a retired office pc with core i5 with as a NAS. I have dropped in 2 disks (3.5T sata) and configured as md raid1 and with lvm on top. It has worked flawless for a year or so, but now after the latest 2 reboots it has triggered a raid rebuilding. Only thing I find in dmesg (but I am not sure what to search for) klaus@raagi:~> sudo dmesg | grep " md" [ 4.131071] md/raid1:md127: active with 2 out of 2 mirrors [ 4.282183] md127: detected capacity change from 0 to 4000261472256 [ 64.407382] md: data-check of RAID array md127 [21681.409218] md: md127: data-check interrupted. [25477.760407] md: data-check of RAID array md127 [47096.271827] md: md127: data-check interrupted. I left the PC running after reboot, so I am not sure why the data-check was interrupted. Any ideas on why it has started to rebuild after every reboot? -- Cheers Klaus

5 6

Paste.Opensuse - Trying to Paste "freshclam -v" output - says I'm a Spammer - WTF?
by David C. Rankin 15 Nov '21

15 Nov '21

All, paste.opensuse.org has gone nuts. I'm attempting to paste the 100 lines from "freshclam -v" as freshclam failed claiming it can't reach any servers in freshclam.conf. However, paste.opensuse.org responds: <quote> An Error Was Encountered You are spammer!!! </quote> Huh? What gives? -- David C. Rankin, J.D.,P.E.

3 4

leap 15.3 - install on an NFS root is a bit odd
by Per Jessen 14 Nov '21

14 Nov '21

Having booted the installation system, and gone into the expert partitioner, the 'Add' option does not have a keyboard shortcut - you have to tab to it and hit enter. That's new. -- Per Jessen, Zürich (8.5°C)

1 0

[oS-en] fetchmail-procmail problem
by Carlos E. R. 14 Nov '21

14 Nov '21

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Content-ID: <578bc7ac-29ef-ce25-f78d-8a1287a3bc21(a)minas-tirith.valinor> Hi, I'm trying to fetch mail from an imap folder at my ISP, and put it on a local folder; no sorting, no filtering. But I am having a problem: the result is not an mbox file. I have not seen this before. Fetching script - it appears to work correctly: cer@minas-tirith:~> cat ~/bin/recogercorreo_TL_tmp #!/bin/bash # 20211111 # Uses "/home/cer/.fetchmail_TLtmp/.fetchmailrc", which uses ~/.procmailrc_TLtmp # Purpose: fetch mail from telefonica temporary folder and put into local folder on disk. CUAL=TLtmp DATE=`date --iso=ns` SECS1=`date +%s` cd $HOME/.fetchmail_$CUAL FETCHMAILHOME=$HOME/.fetchmail_$CUAL fetchmail -v --fetchmailrc .fetchmailrc & PID=$! wait # PID is blank if run is not in background, it has finished the process when it gets to that line. # And I need that number to do the grep sucessfully. Thus I have to wait after it. DATE=`date --iso=ns` SECS2=`date +%s` DIFF=`expr $SECS2 - $SECS1` echo "$DATE Done fetchmail $CUAL (PID: $PID) in $DIFF seconds" grep fetchmail /var/log/mail | grep $PID | grep "message.*for .* at .*" | cut -d" " -f6- cer@minas-tirith:~> The result of a run is as expected: cer@minas-tirith:~> recogercorreo_TL_tmp 2021-11-13T21:38:20,174755076+01:00 Done fetchmail TLtmp (PID: 3717) in 4 seconds 3717 - - 197 messages for CARLOS at imap.telefonica.net (folder temporary) cer@minas-tirith:~> fetchmail file: cer@minas-tirith:~> cat /home/cer/.fetchmail_TLtmp/.fetchmailrc set syslog set no spambounce # 20211111 # Called by "recogercorreo_TL_tmp", and uses ~/.procmailrc_TLtmp # Purpose: fetch mail from telefonica temporary folder and put into local folder on disk. poll imap.telefonica.net with proto imap timeout 20, and tracepolls user *****, with password *****, is cer here, and fetchall, fetchlimit 25, keep, expunge 20, folders temporary mda "/usr/bin/procmail -m $HOME/.procmailrc_TLtmp" cer@minas-tirith:~> The procmail recipe file is this - it seems more complicated than needed because it is copy pasted from a big one, last used long ago. This is the one that is failing, ie, not generating the expected result: cer@minas-tirith:~> cat .procmailrc_TLtmp LOGFILE=$HOME/procmail_TLtmp.log # 20211111 # Everything goes to a single folder. # This file is used by /home/cer/.fetchmail_TLtmp/.fetchmailrc, because apparently fetchmail can not put mail directly into a folder. # http://pm-doc.sourceforge.net/doc/#variables_used_in_recipes # Pure newline NL = " " # Some useful date stamps TODAYISO = `date '+%Y-%m-%d %H:%M:%S.%N%:z'` #TODAY = `date '+%Y-%m-%d'` #THISMONTH = `date '+%Y-%m'` THISWEEK = `date '+%Y-%m_%W'` #LOG = "+++··· GOT $TODAYISO === $TODAY === $THISMONTH $NL" # 2.4 Procmail module library project # get it from here http://freecode.com/projects/procmail-lib # There is a "pm-jadate.rc" file somewhere that sets MM and DD etc. See ~/bin/cosas/procmail/ VERBOSE=off VERBOSE=on DELIVER = "/usr/lib/dovecot/dovecot-lda" FORMAIL = "/usr/bin/formail" :0 h * ^Message-ID: MESSAGEID=| $FORMAIL -c -xMessage-ID: LOG="$NL+++----> STARTING LOG at $HOST $TODAYISO (msgid: $MESSAGEID) $NL" dummy = "you can use this dummy to tell things on the log - when verbose is on" :0 * ^X-Spam-Status: Yes $HOME/Mail/alpine_r_tl_tmp_spam # Everything goes to a single folder. # testing. :0 $HOME/Mail/alpine_r_tl_tmp # No good, creates single mail. File has wrong format. cer@minas-tirith:~> The log is this - maybe. Each entry ends really at the " Folder:" line: procmail: [3718] Sat Nov 13 21:38:16 2021 procmail: Assigning "DELIVER=/usr/lib/dovecot/dovecot-lda" procmail: Assigning "FORMAIL=/usr/bin/formail" procmail: Match on "^Message-ID:" procmail: Assigning "MESSAGEID=" procmail: Executing "/usr/bin/formail,-c,-xMessage-ID:" procmail: Assigning "LOG= +++----> STARTING LOG at minas-tirith.valinor 2021-11-13 21:38:16.702260932+01:00 (msgid: <20211109015055.1547604-2-david(a)fromorbit.com>) " +++----> STARTING LOG at minas-tirith.valinor 2021-11-13 21:38:16.702260932+01:00 (msgid: <20211109015055.1547604-2-david(a)fromorbit.com>) procmail: Assigning "dummy=you can use this dummy to tell things on the log - when verbose is on" procmail: No match on "^X-Spam-Status: Yes" procmail: Assigning "LASTFOLDER=/home/cer/Mail/alpine_r_tl_tmp" procmail: Opening "/home/cer/Mail/alpine_r_tl_tmp" procmail: Acquiring kernel-lock Subject: [PATCH 01/16] xfs: factor out the CIL transaction header building Folder: /home/cer/Mail/alpine_r_tl_tmp 7988 procmail: [3732] Sat Nov 13 21:38:16 2021 procmail: Assigning "DELIVER=/usr/lib/dovecot/dovecot-lda" procmail: Assigning "FORMAIL=/usr/bin/formail" procmail: Match on "^Message-ID:" procmail: Assigning "MESSAGEID=" procmail: Executing "/usr/bin/formail,-c,-xMessage-ID:" procmail: Assigning "LOG= +++----> STARTING LOG at minas-tirith.valinor 2021-11-13 21:38:16.813368222+01:00 (msgid: <20211109015055.1547604-5-david(a)fromorbit.com>) " +++----> STARTING LOG at minas-tirith.valinor 2021-11-13 21:38:16.813368222+01:00 (msgid: <20211109015055.1547604-5-david(a)fromorbit.com>) procmail: Assigning "dummy=you can use this dummy to tell things on the log - when verbose is on" procmail: No match on "^X-Spam-Status: Yes" procmail: Assigning "LASTFOLDER=/home/cer/Mail/alpine_r_tl_tmp" procmail: Opening "/home/cer/Mail/alpine_r_tl_tmp" procmail: Acquiring kernel-lock Subject: [PATCH 04/16] xfs: embed the xlog_op_header in the commit record Folder: /home/cer/Mail/alpine_r_tl_tmp 7494 procmail: [3748] Sat Nov 13 21:38:16 2021 procmail: Assigning "DELIVER=/usr/lib/dovecot/dovecot-lda" procmail: Assigning "FORMAIL=/usr/bin/formail" procmail: Match on "^Message-ID:" procmail: Assigning "MESSAGEID=" procmail: Executing "/usr/bin/formail,-c,-xMessage-ID:" +++----> STARTING LOG at minas-tirith.valinor 2021-11-13 21:38:16.908540742+01:00 (msgid: <20211109015055.1547604-4-david(a)fromorbit.com>) " +++----> STARTING LOG at minas-tirith.valinor 2021-11-13 21:38:16.908540742+01:00 (msgid: <20211109015055.1547604-4-david(a)fromorbit.com>) Mail syslog only contains fetchmail verbose log, everything seems normal. <2.6> 2021-11-13 21:38:16 minas-tirith fetchmail 3717 - - 6.3.26 querying imap.telefonica.net (protocol IMAP) at 2021-11-13T21:38:16 CET: poll started <2.6> 2021-11-13 21:38:16 minas-tirith fetchmail 3717 - - Trying to connect to 86.109.99.71/143... <2.6> 2021-11-13 21:38:16 minas-tirith fetchmail 3717 - - IMAP< * OK [CAPABILITY IMAP4rev1 SASL-IR LOGIN-REFERRALS ID ENABLE IDLE LITERAL+ STARTTLS AUTH=PLAIN AUTH=CRAM-MD5] e.movistar.es. <2.6> 2021-11-13 21:38:16 minas-tirith fetchmail 3717 - - will idle after poll <2.6> 2021-11-13 21:38:16 minas-tirith fetchmail 3717 - - IMAP> A0001 STARTTLS <2.6> 2021-11-13 21:38:16 minas-tirith fetchmail 3717 - - IMAP< A0001 OK Begin TLS negotiation now. ... <2.6> 2021-11-13 21:38:16 minas-tirith fetchmail 3717 - - IMAP> A0006 FETCH 1 RFC822.HEADER <2.6> 2021-11-13 21:38:16 minas-tirith fetchmail 3717 - - IMAP< * 1 FETCH (RFC822.HEADER {4102} <2.6> 2021-11-13 21:38:16 minas-tirith fetchmail 3717 - - reading message **********.net:1 of 197 (log message incomplete) <2.6> 2021-11-13 21:38:16 minas-tirith fetchmail 3717 - - IMAP< ) <2.6> 2021-11-13 21:38:16 minas-tirith fetchmail 3717 - - IMAP< A0006 OK Fetch completed (0.022 + 0.000 + 0.021 secs). <2.6> 2021-11-13 21:38:16 minas-tirith fetchmail 3717 - - IMAP> A0007 FETCH 1 BODY.PEEK[TEXT] <2.6> 2021-11-13 21:38:16 minas-tirith fetchmail 3717 - - IMAP< * 1 FETCH (BODY[TEXT] {3826} <2.6> 2021-11-13 21:38:16 minas-tirith fetchmail 3717 - - (3826 body octets) (log message incomplete) <2.6> 2021-11-13 21:38:16 minas-tirith fetchmail 3717 - - IMAP< ) <2.6> 2021-11-13 21:38:16 minas-tirith fetchmail 3717 - - IMAP< A0007 OK Fetch completed (0.001 + 0.000 secs). <2.6> 2021-11-13 21:38:16 minas-tirith fetchmail 3717 - - not flushed <2.6> 2021-11-13 21:38:16 minas-tirith fetchmail 3717 - - IMAP> A0008 STORE 1 +FLAGS (\Seen) <2.6> 2021-11-13 21:38:16 minas-tirith fetchmail 3717 - - IMAP< A0008 OK Store completed (0.003 + 0.000 + 0.002 secs). <2.6> 2021-11-13 21:38:16 minas-tirith fetchmail 3717 - - IMAP> A0009 FETCH 2 RFC822.HEADER <2.6> 2021-11-13 21:38:16 minas-tirith fetchmail 3717 - - IMAP< * 2 FETCH (RFC822.HEADER {4101} <2.6> 2021-11-13 21:38:16 minas-tirith fetchmail 3717 - - reading message*******.net:2 of 197 (log message incomplete) ... <2.6> 2021-11-13 21:38:20 minas-tirith fetchmail 3717 - - IMAP< A0079 OK Fetch completed (0.001 + 0.000 secs). <2.6> 2021-11-13 21:38:20 minas-tirith fetchmail 3717 - - not flushed <2.6> 2021-11-13 21:38:20 minas-tirith fetchmail 3717 - - IMAP> A0080 STORE 25 +FLAGS (\Seen) <2.6> 2021-11-13 21:38:20 minas-tirith fetchmail 3717 - - IMAP< A0080 OK Store completed (0.003 + 0.000 + 0.002 secs). <2.6> 2021-11-13 21:38:20 minas-tirith fetchmail 3717 - - fetchlimit 25 reached; 172 messages left on server imap.telefonica.net account ***** <2.6> 2021-11-13 21:38:20 minas-tirith fetchmail 3717 - - IMAP> A0081 LOGOUT <2.6> 2021-11-13 21:38:20 minas-tirith fetchmail 3717 - - IMAP< * BYE Logging out <2.6> 2021-11-13 21:38:20 minas-tirith fetchmail 3717 - - IMAP< A0081 OK Logout completed (0.000 + 0.000 secs). <2.6> 2021-11-13 21:38:20 minas-tirith fetchmail 3717 - - 6.3.26 querying imap.telefonica.net (protocol IMAP) at 2021-11-13T21:38:20 CET: poll completed <2.6> 2021-11-13 21:38:20 minas-tirith fetchmail 3717 - - Query status=13 (MAXFETCH) <2.6> 2021-11-13 21:38:20 minas-tirith fetchmail 3717 - - normal termination, status 13 The result should be an mbox file: cer@minas-tirith:~> l Mail/alpine_r_tl_tmp -rw-r--r-- 1 cer users 266791 Nov 13 21:38 Mail/alpine_r_tl_tmp cer@minas-tirith:~> file Mail/alpine_r_tl_tmp Mail/alpine_r_tl_tmp: SMTP mail, ASCII text, with very long lines cer@minas-tirith:~> But look at the format, it is wrong, mail programs can not use it: cer@minas-tirith:~> head -n 20 Mail/alpine_r_tl_tmp Return-Path: <linux-xfs-owner(a)vger.kernel.org> Delivered-To: robin.listas(a)telefonica.net Received: from imap.telefonica.net [86.109.99.71] by minas-tirith.valinor with IMAP (fetchmail-6.3.26 polling imap.telefonica.net account robin.listas2 folder temporary) for <cer@localhost> (single-drop); Sat, 13 Nov 2021 21:38:16 +0100 (CET) Received: from dovector01.e.movistar.es ([217.116.1.119]) by lda06.e.movistar.es (Dovecot) with LMTP id 61IFOAfUiWHeLgAAdnA+5w for <robin.listas(a)telefonica.net>; Tue, 09 Nov 2021 02:51:03 +0100 Received: from asavin03.e.movistar.es ([217.116.1.119]) by dovector01.e.movistar.es with LMTP id OPVJOAfUiWFdQQAAMW5kXg (envelope-from <linux-xfs-owner(a)vger.kernel.org>) for <robin.listas(a)telefonica.net>; Tue, 09 Nov 2021 02:51:03 +0100 Received: from relayin04.e.movistar.es (217-116-1-119.redes.acens.net [217.116.1.119]) by asavin03.e.movistar.es (Postfix) with ESMTP id 4Hp9tb58VczvQC1 for <robin.listas(a)telefonica.net>; Tue, 9 Nov 2021 02:51:03 +0100 (CET) X-Tnet-ASAV: Yes Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by relayin04.e.movistar.es (Postfix) with ESMTP id 4Hp9tb3fBYzXdy0 for <robin.listas(a)telefonica.net>; Tue, 9 Nov 2021 02:51:03 +0100 (CET) cer@minas-tirith:~> While a normal mbox file looks this way: cer@minas-tirith:~> head -n 20 Mail/alpine_r_tl From MAILER-DAEMON Sat Nov 13 21:08:23 2021 Date: 13 Nov 2021 21:08:23 +0100 From: Mail System Internal Data <MAILER-DAEMON(a)minas-tirith.valinor> Subject: DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA Message-ID: <1636834103(a)minas-tirith.valinor> X-IMAP: 1636834103 0000180411 NonJunk mio $Forwarded $label3 $label1 z-half-jerk $label4 jerk interesting $label5 junk $label2 $MDNSent hecho mark curio investigate googlegroups Status: RO This text is part of the internal format of your mail folder, and is not a real message. It is created automatically by the mail system software. If deleted, important folder data will be lost, and it will be re-created with the data reset to initial values. From cer(a)Telcontar.valinor Fri Aug 28 23:28:22 2020 Return-Path: <linux-xfs-owner(a)vger.kernel.org> Delivered-To: robin.listas(a)telefonica.net Received: from dovector01.e.movistar.es ([217.116.1.119]) by lda04.e.movistar.es (Dovecot) with LMTP id 8653AvZ2SV+8VAAAEdfVVg for <robin.listas(a)telefonica.net>; Fri, 28 Aug 2020 23:28:22 +0200 Received: from asavin02.e.movistar.es ([217.116.1.119]) cer@minas-tirith:~> The first line: From MAILER-DAEMON Sat Nov 13 21:08:23 2021 is the key, it separates one mail from the other. It is missing in the file newly generated by procmail. Something is wrong. Either something changed in the code (I have not used procmail in months), or I made a config mistake, but I need a fresh pair of eyes ;-) - -- Cheers, Carlos E. R. (from openSUSE Leap 15.2 x86_64 (Minas Tirith)) -----BEGIN PGP SIGNATURE----- iJIEAREIADoWIQQt/vKEw5659AgM/X2NrxRtxRYzXAUCYZAsDxwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJEI2vFG3FFjNckIAA/3KigKecZnNf2KkjDl90 0T20R5uRLFA3Jb3EyINePYKUAP4k0XWgHZCjfK5Ua47JIrNEA7lPsB6rWp8YYPsL snixDw== =SfdB -----END PGP SIGNATURE-----

9 34

106 MiB of photographs
by Douglas McGarrett 14 Nov '21

14 Nov '21

Someone please advise how to send by email 106 MiB worth of high quality photographs. This is for an insurance claim, and it will be simpler if they can all be kept together under a single email Thanx--doug

7 6

leap 15.3, latest kernel update (nov 2021) patch not installing or applying at all?
by cagsm 12 Nov '21

12 Nov '21

hi list, some basic leap 15.3 machine, x64, not willing to apply latest kernel update patch openSUSE-SLE-15.3-2021-3655 not via patch, not via direct patch command with patchname added, not via zypper up, not anything. according to the updates lists posting this patch is ought to be giving an x64 system some kernel version with 5.3.18-59.30something. but my system is stuck still on the 5.3.18-59.27something from beginning of october 2021 see below. bug? delay? not released yet? in the past my experience was that the patches were on the repository servers way before a posting appeared on the update/list etc. am i missing anything here? ty. uname -a Linux tux 5.3.18-59.27-default #1 SMP Tue Oct 5 10:00:40 UTC 2021 (7df2404) x86_64 x86_64 x86_64 GNU/Linux cat /etc/os-release NAME="openSUSE Leap" VERSION="15.3" ID="opensuse-leap" ID_LIKE="suse opensuse" VERSION_ID="15.3" PRETTY_NAME="openSUSE Leap 15.3" ANSI_COLOR="0;32" CPE_NAME="cpe:/o:opensuse:leap:15.3" BUG_REPORT_URL="https://bugs.opensuse.org" HOME_URL="https://www.opensuse.org/" sudo zypper -v in -t patch openSUSE-SLE-15.3-2021-3655=1 Verbosity: 2 Non-option program arguments: 'openSUSE-SLE-15.3-2021-3655=1' Initializing Target Checking whether to refresh metadata for Update repository of openSUSE Backports Checking whether to refresh metadata for Non-OSS Repository Checking whether to refresh metadata for Main Repository Checking whether to refresh metadata for Update repository with updates from SUSE Linux Enterprise 15 Checking whether to refresh metadata for Update Repository (Non-Oss) Checking whether to refresh metadata for Main Update Repository Loading repository data... Reading installed packages... Force resolution: No Patch 'openSUSE-SLE-15.3-2021-3655-1' is not needed. Resolving package dependencies... Force resolution: No Nothing to do.

2 1