October 2019 - openSUSE Users - openSUSE Mailing Lists

[opensuse] tumbleweed update libvirtd did not start any more.
by Simon Becherer 05 Oct '19

05 Oct '19

Hi, updated tumbleweed from: 20190607 -> 20191002 libvirt will not start any more. (before was running) ● libvirtd.service - Virtualization daemon Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; enabled; vendor preset: disabled) Active: failed (Result: exit-code) since Sat 2019-10-05 16:46:22 CEST; 3min 20s ago Docs: man:libvirtd(8) https://libvirt.org Process: 9810 ExecStart=/usr/sbin/libvirtd $LIBVIRTD_ARGS (code=exited, status=6) Main PID: 9810 (code=exited, status=6) Oct 05 16:46:22 becherer2 systemd[1]: libvirtd.service: Service RestartSec=100ms expired, scheduling restart. Oct 05 16:46:22 becherer2 systemd[1]: libvirtd.service: Scheduled restart job, restart counter is at 5. Oct 05 16:46:22 becherer2 systemd[1]: Stopped Virtualization daemon. Oct 05 16:46:22 becherer2 systemd[1]: libvirtd.service: Start request repeated too quickly. Oct 05 16:46:22 becherer2 systemd[1]: libvirtd.service: Failed with result 'exit-code'. Oct 05 16:46:22 becherer2 systemd[1]: Failed to start Virtualization daemon. ● libvirtd.socket - Libvirt local socket Loaded: loaded (/usr/lib/systemd/system/libvirtd.socket; disabled; vendor preset: disabled) Active: failed (Result: service-start-limit-hit) since Sat 2019-10-05 16:46:22 CEST; 3min 20s ago Listen: /run/libvirt/libvirt-sock (Stream) Oct 05 16:46:21 becherer2 systemd[1]: Listening on Libvirt local socket. Oct 05 16:46:22 becherer2 systemd[1]: libvirtd.socket: Failed with result 'service-start-limit-hit'. what should this tell me???? simoN -- www.becherer.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3

Re: [opensuse] video question
by Carlos E.R. 05 Oct '19

05 Oct '19

You forgot to post to the list, so others could not comment. On 04/10/2019 20.23, Doug McGarrett wrote: > On 10/04/2019 01:04 PM, Carlos E.R. wrote: >> On 04/10/2019 16.31, Peter McD wrote: >>> Am 04.10.19 um 14:10 schrieb Carlos E. R.: >>>> On 04/10/2019 13.45, Peter McD wrote: >>>>> Am 04.10.19 um 02:52 schrieb Doug McGarrett: >>>>> >>>>>> Thank you, Carlos! I believe that this worked. Your very detailed >>>>>> instructions are just what I needed to add the Packman stuff. > > It looks lke it only partly worked. I can now see a picture when I try > and open "This Glider Uses Water-Reactive Fuel to Launch" from the Pop > Mech site, but I just get a little circle going around and around in the > middle of the picture. Maybe the picture is defective, but I > suspect there's still something missing. The other test video that > someone suggested in this thread is viewable. Well, maybe you need to restart the session or maybe reboot. Try "zypper ps" to see what is pending (as root or sudo). It is also possible that you need something else. Enter yast software manager again, search (in the search box) for "GStreamer" (name only). There should be a lot of them. Well, now, one by one you check that they come from packman (there is a version tab on the right hand panel). Some do not have a version on packman, so don't change them. You'll see a list of package versions and from where; the top line says what's the installed version. If it is not packman and there is one from packman, just tick on the one that says "packman". There should be none to change, as you did the switch yesterday. Maybe there is some not installed package, though; if that's the case, use your judgment to install them. Those will not have a tick on the left (right hand panel, top half). Ignore the -debuginfo or -devel or -doc packages. Possibly ignore the -32bit too. Me, I just did that and found some new ones. -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

1 0

[opensuse] leap 15.0 zypper up - Segmentation Fault??
by David C. Rankin 04 Oct '19

04 Oct '19

All, This is the first time I've seen this: # zypper up Retrieving repository 'cinelerra' metadata ........................................................[done] Building repository 'cinelerra' cache .............................................................[done] Retrieving repository 'mozilla' metadata ..........................................................[done] Building repository 'mozilla' cache ...............................................................[done] Retrieving repository 'update' metadata --------------------------------------------------------------[/]Segmentation fault zypper.log contains, e.g. <snip> 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 Error: signal 11 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [hd]: (-3) /usr/lib64/libzypp.so.1712 : zypp::dumpBacktrace(std::ostream&)+0x39 [0x7f6be32eb399] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [hd]: (-2) /usr/lib64/libzypp.so.1712 : +0x39923b [0x7f6be32a423b] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [hd]: (-1) /lib64/libc.so.6 : +0x361e0 [0x7f6be1dd11e0] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 vvvvvvvvvv---------------------------------------- 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [bt]: (0) /usr/lib64/libcurl.so.4 : +0x53011 [0x7f6be156e011] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [bt]: (1) /usr/lib64/libcurl.so.4 : +0x530bf [0x7f6be156e0bf] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [bt]: (2) /usr/lib64/libcurl.so.4 : +0x538fa [0x7f6be156e8fa] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [bt]: (3) /usr/lib64/libcurl.so.4 : +0x54b07 [0x7f6be156fb07] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [bt]: (4) /usr/lib64/libcurl.so.4 : +0x21c39 [0x7f6be153cc39] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [bt]: (5) /usr/lib64/libcurl.so.4 : +0xf3a8 [0x7f6be152a3a8] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [bt]: (6) /usr/lib64/libcurl.so.4 : +0x2660f [0x7f6be154160f] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [bt]: (7) /usr/lib64/libcurl.so.4 : +0x382e3 [0x7f6be15532e3] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [bt]: (8) /usr/lib64/libcurl.so.4 : curl_multi_perform+0xc3 [0x7f6be1554423] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [bt]: (9) /usr/lib64/libzypp.so.1712 : zypp::media::multifetchrequest::run(std::vector<zypp::Url, std::allocator<zypp::Url> >&)+0x148 [0x7f6be306b838] 2019-10-04 15:45:06 <5> vlleap15(7938) [zypp] ZYppFactory.cc(sigsegvHandler):55 [bt]: (10) /usr/lib64/libzypp.so.1712 : zypp::media::MediaMultiCurl::multifetch(zypp::filesystem::Pathname const&, _IO_FILE*, std::vector<zypp::Url, std::allocator<zypp::Url> >*, zypp::callback::SendReport<zypp::media::DownloadProgressReport>*, zypp::media::MediaBlockList*, long) const+0x528 [0x7f6be306df38] <snip> ?? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Help with crontab
by Gustav Degreef 04 Oct '19

04 Oct '19

Hello, I am trying to use festival TTS. It needs to be run as a server. The instructions are to enter in a console " sudo crontab -e" command then to add @restart /usr/bin/festival --server Tha is straightforward, but then I don't know how to proceed from there. I read the man page for crontab and it says that once the commands are specified, you have to exit the editor that is specified (I guess in my system) and then the crontab file becomes active. I have no idea where to proceed after I past the command into the window. I tried typing exit, q and control q, but nothing happens. The menu of the window says to save the output, but when I try that it gives a blank box to type a name to save it to. What is the correct way to finish the task Any help would be appreciated. Gustav -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

14 57

[opensuse] Search by content does not work for me.
by Carlos E. R. 04 Oct '19

04 Oct '19

Leap 15.0, XFCE. I don't know what "program" does it, the title of the box says "search for files". There is no "about" box. But in the "ps afxu" list I see that "gnome-search-tool" is running. I select to search: Name contains: *odt Look in folder: cer (that's my home) Select more options contains the text: cucaracha Finds nothing. Which is absurd, I have that LO doc opened, the file does exist. If I try search without a content, also finds nothing. Again absurd, I have many *odt files on my home. I can not see in the entire application menu what to use to configure the search, but I have used it in the past, so it must exist. Anyway, this tool says it uses "find(1), locate(1), grep(1)". Grep? Wasn't there a tool in gnome or xfce that created an index of contents that took a lot of resources, similar to baloo in KDE? What's it name? Ah, tracker. If I run "tracker" nothing happens. It seems to be a CLI program. cer@Telcontar:~> tracker status Currently indexed: 107064 files, 5715 folders Remaining space on database partition: 59,0 GB (56,13%) All data miners are idle, indexing complete cer@Telcontar:~> The rpm description says: tracker - Object database, tag/metadata database, search tool and indexer Tracker is a desktop-neutral object database, tag/metadata database, search tool and indexer. There must be a GUI to it! The wikipedia says "Tracker has been adopted by the GNOME desktop environment and is heavily integrated into GNOME Shell and GNOME Files." Ok, how do I use it? I don't see it in Nautilus (aka gnome files). I see a search button, but I do not see how to search for a file pattern with a certain content. [...] Ok, found it, and it does locate the "cucarachas" files. Not easy at all to find it, and each time I need it I have to search first how to do it... Took an hour! -- Cheers / Saludos, Carlos E. R. (from 15.0 x86_64 at Telcontar)

3 4

[opensuse] Cisco ARM
by Roger Oberholtzer 03 Oct '19

03 Oct '19

Does anyone have any experience with Cisco ARM on openSUSE? Especially Tumbleweed? It seems that we may need to run this on any Linux computer that we want to connect to our work network. I see that they support RedHat and CentOS. But often the RedHat stuff will install on openSUSE. At least I am hoping... And maybe they support SUSE, even if I did not see it when I did a quick check. Seems our company is wanting ISO27001 certification. -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] Start job for home partition times out after upgrading to 20190923 or newer
by Noah Davis 02 Oct '19

02 Oct '19

I'm using Tumbleweed. When I upgrade from snapshot 20190921 to 20190923 or newer (including 20190926), the start job for my home partition (XFS filesystem) times out when I am booting my laptop. This causes my laptop to go into what I assume is a rescue mode where I can enter my root password and run commands. If I comment out my home partition in /etc/fstab, I can get to SDDM, but I can't log in because I don't have access to my home partition. I have looked at `journalctl -xb`, but I could not find anything else about why this happened. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] Tumbleweed and NVidia GEFORCE GT610
by Roger Oberholtzer 02 Oct '19

02 Oct '19

I am trying to do a new Tumbleweed install on a system that has a GT610 graphics card. The install fails early on, complaining that /usr/lib64/dri/swrast_dri.so cannot be found. This file does exist in a current Tumbleweed system. So, I am guessing that there are fewer files on the install media. In this case, it is the network installer. Two questions: * Is there a list of supported graphics cards that can be used with tumbleweed (including the install step)? * Might more files be available in the full installer as compared to the network installer? This is a install of a test system. We were just hoping to use what we had at hand for some equipment testing. We need Tumbleweed because many libraries are compatible with Ubuntu 18.04. Don't ask... -- Roger Oberholtzer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 4