June 2016 - openSUSE Users - openSUSE Mailing Lists

[opensuse] PureFTP won't allow NAT
by James Knott 29 Jun '16

29 Jun '16

I've set up a pure-FTP server. However, I can't access it via NAT. It gives the error "I won't open a connectio to ...". FTP from non-NAT works fine. Any way to disable this "feature"? tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 7

[opensuse] keyboard, mouse "die" some time after hotplugging
by Mikhail Ramendik 29 Jun '16

29 Jun '16

Hello, I am using a DIY KVM switch system. While the HDMI switch is no problem at all for now, the keyboard and mouse were switched using a cheap USB2 Hub... and this became a problem. Some time *after* the last switch the keyboard and mouse silently failed. I switched them to a different USB2 port and they worked for some time before failing again. Now no USB2 port would take them, either through the hub or apart, but I put them into USB3 ports (apart, without the hub) and for now they work again. If I detahc the mouse and attach to a USB2 port it does not work. Back to USB3, it works. I am looking at dmesg output but not understanding anything. In this excerpt, "usb 1" is the USB3 port, after that connection the mouse works. "usb 3" is the USB2 port, after that connection the mouse does not work. I am failing to see the difference. = [19035.827154] usb 3-1.3: USB disconnect, device number 25 [19042.531244] usb 1-2: new low-speed USB device number 4 using xhci_hcd [19042.664579] usb 1-2: New USB device found, idVendor=047d, idProduct=1022 [19042.664584] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [19042.664586] usb 1-2: Product: Kensington USB/PS2 Orbit [19042.664588] usb 1-2: Manufacturer: Kensington [19042.664816] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [19042.667080] input: Kensington Kensington USB/PS2 Orbit as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:047D:1022.002B/input/input57 [19042.668217] hid-generic 0003:047D:1022.002B: input,hidraw2: USB HID v1.10 Mouse [Kensington Kensington USB/PS2 Orbit] on usb-0000:00:14.0-2/input0 [19073.780021] SFW2-INext-ACC-TCP IN=wlan0 OUT= MAC=00:0e:2e:e5:df:23:dc:ee:06:b1:81:e8:08:00 SRC=109.188.126.140 DST=192.168.1.6 LEN=64 TOS=0x00 PREC=0x00 TTL=49 ID=33939 DF PROTO=TCP SPT=2943 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (02040550010303020101080A000000000000000001010402) [19090.296892] SFW2-INext-ACC-TCP IN=wlan0 OUT= MAC=00:0e:2e:e5:df:23:dc:ee:06:b1:81:e8:08:00 SRC=31.211.34.2 DST=192.168.1.6 LEN=52 TOS=0x00 PREC=0x00 TTL=113 ID=32706 DF PROTO=TCP SPT=62719 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 OPT (020405840103030801010402) [19102.347519] SFW2-INext-ACC-TCP IN=wlan0 OUT= MAC=00:0e:2e:e5:df:23:dc:ee:06:b1:81:e8:08:00 SRC=185.57.29.106 DST=192.168.1.6 LEN=52 TOS=0x00 PREC=0x00 TTL=118 ID=26304 DF PROTO=TCP SPT=53196 DPT=6881 WINDOW=8192 RES=0x00 SYN URGP=0 OPT (020405840103030201010402) [19102.681497] usb 1-2: USB disconnect, device number 4 [19121.054881] usb 3-1.3: new low-speed USB device number 26 using ehci-pci [19121.152346] usb 3-1.3: New USB device found, idVendor=047d, idProduct=1022 [19121.152351] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [19121.152353] usb 3-1.3: Product: Kensington USB/PS2 Orbit [19121.152355] usb 3-1.3: Manufacturer: Kensington [19121.155109] input: Kensington Kensington USB/PS2 Orbit as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:047D:1022.002C/input/input58 [19121.156011] hid-generic 0003:047D:1022.002C: input,hidraw2: USB HID v1.10 Mouse [Kensington Kensington USB/PS2 Orbit] on usb-0000:00:1a.0-1.3/input0 [19133.407347] SFW2-INext-ACC-TCP IN=wlan0 OUT= MAC=00:0e:2e:e5:df:23:dc:ee:06:b1:81:e8:08:00 SRC=109.188.126.140 DST=192.168.1.6 LEN=64 TOS=0x00 PREC=0x00 TTL=49 ID=35871 DF PROTO=TCP SPT=3000 DPT=6881 WINDOW=65535 RES=0x00 SYN URGP=0 OPT (02040550010303020101080A000000000000000001010402) [19153.707437] usb 3-1.3: USB disconnect, device number 26 [19162.346235] usb 1-2: new low-speed USB device number 5 using xhci_hcd [19162.479645] usb 1-2: New USB device found, idVendor=047d, idProduct=1022 [19162.479650] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [19162.479652] usb 1-2: Product: Kensington USB/PS2 Orbit [19162.479654] usb 1-2: Manufacturer: Kensington [19162.479861] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [19162.482360] input: Kensington Kensington USB/PS2 Orbit as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:047D:1022.002D/input/input59 [19162.483570] hid-generic 0003:047D:1022.002D: input,hidraw2: USB HID v1.10 Mouse [Kensington Kensington USB/PS2 Orbit] on usb-0000:00:14.0-2/input0 = Xorg.0.log does not seem to provide a clue either. In this example, the first time I connect the mouse to the USB2 port and it does not work, and the second time I connect it to a USB3 port and it does work: == [ 19949.553] (II) config/udev: removing device Kensington Kensington USB/PS2 Orbit [ 19949.560] (II) evdev: Kensington Kensington USB/PS2 Orbit: Close [ 19949.560] (II) UnloadModule: "evdev" [ 19973.090] (II) config/udev: Adding input device Kensington Kensington USB/PS2 Orbit (/dev/input/mouse0) [ 19973.090] (II) No input driver specified, ignoring this device. [ 19973.090] (II) This device may have been added with another device file. [ 19973.093] (II) config/udev: Adding input device Kensington Kensington USB/PS2 Orbit (/dev/input/event5) [ 19973.093] (**) Kensington Kensington USB/PS2 Orbit: Applying InputClass "evdev pointer catchall" [ 19973.093] (**) Kensington Kensington USB/PS2 Orbit: Applying InputClass "evdev pointer catchall" [ 19973.093] (II) Using input driver 'evdev' for 'Kensington Kensington USB/PS2 Orbit' [ 19973.093] (**) Kensington Kensington USB/PS2 Orbit: always reports core events [ 19973.093] (**) evdev: Kensington Kensington USB/PS2 Orbit: Device: "/dev/input/event5" [ 19973.148] (--) evdev: Kensington Kensington USB/PS2 Orbit: Vendor 0x47d Product 0x1022 [ 19973.148] (--) evdev: Kensington Kensington USB/PS2 Orbit: Found 3 mouse buttons [ 19973.148] (--) evdev: Kensington Kensington USB/PS2 Orbit: Found relative axes [ 19973.148] (--) evdev: Kensington Kensington USB/PS2 Orbit: Found x and y relative axes [ 19973.148] (II) evdev: Kensington Kensington USB/PS2 Orbit: Configuring as mouse [ 19973.148] (**) evdev: Kensington Kensington USB/PS2 Orbit: YAxisMapping: buttons 4 and 5 [ 19973.148] (**) evdev: Kensington Kensington USB/PS2 Orbit: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 19973.148] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:047D:1022.0031/input/input63/event5" [ 19973.148] (II) XINPUT: Adding extended input device "Kensington Kensington USB/PS2 Orbit" (type: MOUSE, id 11) [ 19973.148] (II) evdev: Kensington Kensington USB/PS2 Orbit: initialized for relative axes. [ 19973.148] (**) Kensington Kensington USB/PS2 Orbit: (accel) keeping acceleration scheme 1 [ 19973.148] (**) Kensington Kensington USB/PS2 Orbit: (accel) acceleration profile 0 [ 19973.148] (**) Kensington Kensington USB/PS2 Orbit: (accel) acceleration factor: 2.000 [ 19973.148] (**) Kensington Kensington USB/PS2 Orbit: (accel) acceleration threshold: 4 [ 19996.385] (II) config/udev: removing device Kensington Kensington USB/PS2 Orbit [ 19996.408] (II) evdev: Kensington Kensington USB/PS2 Orbit: Close [ 19996.408] (II) UnloadModule: "evdev" [ 20005.740] (II) config/udev: Adding input device Kensington Kensington USB/PS2 Orbit (/dev/input/mouse0) [ 20005.740] (II) No input driver specified, ignoring this device. [ 20005.740] (II) This device may have been added with another device file. [ 20005.744] (II) config/udev: Adding input device Kensington Kensington USB/PS2 Orbit (/dev/input/event5) [ 20005.745] (**) Kensington Kensington USB/PS2 Orbit: Applying InputClass "evdev pointer catchall" [ 20005.745] (**) Kensington Kensington USB/PS2 Orbit: Applying InputClass "evdev pointer catchall" [ 20005.745] (II) Using input driver 'evdev' for 'Kensington Kensington USB/PS2 Orbit' [ 20005.745] (**) Kensington Kensington USB/PS2 Orbit: always reports core events [ 20005.745] (**) evdev: Kensington Kensington USB/PS2 Orbit: Device: "/dev/input/event5" [ 20005.800] (--) evdev: Kensington Kensington USB/PS2 Orbit: Vendor 0x47d Product 0x1022 [ 20005.800] (--) evdev: Kensington Kensington USB/PS2 Orbit: Found 3 mouse buttons [ 20005.800] (--) evdev: Kensington Kensington USB/PS2 Orbit: Found relative axes [ 20005.800] (--) evdev: Kensington Kensington USB/PS2 Orbit: Found x and y relative axes [ 20005.800] (II) evdev: Kensington Kensington USB/PS2 Orbit: Configuring as mouse [ 20005.800] (**) evdev: Kensington Kensington USB/PS2 Orbit: YAxisMapping: buttons 4 and 5 [ 20005.800] (**) evdev: Kensington Kensington USB/PS2 Orbit: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 20005.800] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:047D:1022.0032/input/input64/event5" [ 20005.800] (II) XINPUT: Adding extended input device "Kensington Kensington USB/PS2 Orbit" (type: MOUSE, id 11) [ 20005.800] (II) evdev: Kensington Kensington USB/PS2 Orbit: initialized for relative axes. [ 20005.800] (**) Kensington Kensington USB/PS2 Orbit: (accel) keeping acceleration scheme 1 [ 20005.800] (**) Kensington Kensington USB/PS2 Orbit: (accel) acceleration profile 0 [ 20005.800] (**) Kensington Kensington USB/PS2 Orbit: (accel) acceleration factor: 2.000 [ 20005.800] (**) Kensington Kensington USB/PS2 Orbit: (accel) acceleration threshold: 4 == What else should I look into? And, is there anything I should try? Newer kernel maybe? (4.1.26 for now - stock Leap 42.1 kernel; I know there are newer kernel packages for Leap) -- Yours, Mikhail Ramendik Unless explicitly stated, all opinions in my mail are my own and do not reflect the views of any organization -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 4

[opensuse] KDE4 task manager contrast
by Istvan Gabor 28 Jun '16

28 Jun '16

Hello: My question applies to openSUSE 13.1 and its default KDE 4 version. I use the "Air for netbooks" desktop theme. I find the task manager's contrast too light, the font color is not dark enough for my eyes. How can I change the task manager's font color or font style? I don't want to search for other theme, I would like to adjust this theme. Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

[opensuse] Multiple Copies Of Same Email In Thunderbird?
by Uzair Shamim 28 Jun '16

28 Jun '16

Hi, TB seems to keep making several copies of emails in certain threads for me. Is anyone able to reproduce this/have this problem before? Example: http://paste.opensuse.org/view/raw/0d069732 Is there any way to clean this up? It seems every couple hours it makes a new copy of the email and alerts me I got a new email when I didnt. I suspect it only happens when I reply to a thread on the ML but I dont know what could be causing it. -- Regards, Uzair Shamim -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 6

[opensuse] libreoffice writer, writer2latex missing
by Olaf Hering 28 Jun '16

28 Jun '16

The libreoffice.org website mentions the existance of an "writer to LaTeX" export filter (named writer2latex). For some reason neither osc nor zypper find a copy of it for Tumbleweed. I wonder if I just miss it, or if really noone took the time to package (and test) it. Does anyone know whats going on with this thing? Olaf

2 1

[opensuse] KDE4 - how to open new windows in foreground
by Istvan Gabor 28 Jun '16

28 Jun '16

Hello: This applies to openSUSE 13.2 with its default KDE4 desktop system. When I open a document in libreoffice by double-clicking it in dolphin or krusader, the opened document window doesn't come into the foreground, it stays in the back behind other windows. It occurs to adobe reader too, if a document is already open in a tab, opening another pdf will not bring adobe window into the foreground. How can I set a newly opened window to go into the foreground? Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] oSC16 keysigning party
by Johannes Segitz 28 Jun '16

28 Jun '16

Hi, at oSC16 we would like to offer the opportunity to get your key signed by other openSUSE contributors. Some of our SUSE employees have very well connected GPG keys, don't miss this opportunity. To make this procedure as efficient as possible I would like to use the procedure used by FOSDEM: - All attendees send their public keys to me: # gpg --armor --export --output $KEY_ID.gpg $KEY_ID Send $KEY_ID.gpg via email to me (jsegitz(a)suse.com) - I'll compose a file with all the signatures, further instructions and send a signed version around three days before the event - You need to print out that list, compute two hashes and fill them in on the printed copy (it's described in the file you'll receive). Bring this list, a pen and some form of photo ID to the keysigning party. With that procedure everyone can check their own key and the hashes. If there are no discrepancies only the photo ID needs to be checked, which speeds up the event considerably. Johannes -- GPG Key E7C81FA0 EE16 6BCE AD56 E034 BFB3 3ADD 7BF7 29D5 E7C8 1FA0 Subkey fingerprint: 250F 43F5 F7CE 6F1E 9C59 4F95 BC27 DD9D 2CC4 FD66 SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg)

3 7

[opensuse] Asus HA1M-E Motherboard and OpenSUSE
by Charles Philip Chan 27 Jun '16

27 Jun '16

Hello all: My home server died.I will be replacing it with a cheap machine with an Asus HA1M-E motherboard. Does anyone have experience with running this motherboard with OpenSUSE? Are there any got yous (such as secure boot, etc)? Thanks. Charles -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] Who owns the land?
by Greg Freemyer 27 Jun '16

27 Jun '16

Reading the other thread I got a little confused what was being said. I thought I should add to the confusion. I think this is accurate. - Over the last 250 years, the US Government has provided "fee-simple title" to about 2/3rds of the land in this country. But it still owns about 1/3rd of the country. - In Canada, only 15% was privately titled, the remaining 85% is still owned "by the crown". - In Australia about 23% of the land is "Crown Land". === In the British countries (UK / Canada / Australia) the Queen is the head of the Crown and some claim she owns the Crown Land in those countries. That may be true, but I seriously doubt she could sell any of it. On the other hand, a 100 year lease to build an airport, etc. might be reasonable. === Remember Hong Kong? For 99 years it was leased by the English from China. The lease ended 20 years ago and it is back under Chinese rule. === In the US, I've heard people claim our $17 Trillion debt isn't that big a deal. After all, the government owns many trillions of dollars of private land. If worst came to worst it could sell it off. I don't know if that is realistic or not. Greg -- Greg Freemyer www.IntelligentAvatar.net -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

RE: [opensuse] Playing WMV in VLC
by stakanov＠freenet.de 27 Jun '16

27 Jun '16

> -----Ursprüngliche Nachricht----- > Von: Mikhail Ramendik > Gesendet: Do. 23.06.2016 06:44 > An: opensuse Mailing List , > Betreff: [opensuse] Playing WMV in VLC > > Hello, > > I have installed VLC from packman and things generally worked fine - > until I wanted to play a WMV file, which VLC just can't play. > > I googled but all I could find was a reference to vlc-codecs, which is > installed. Here is zypper if for the package: > > Information for package vlc-codecs: > ----------------------------------- > Repository: Packman Repository > Name: vlc-codecs > Version: 2.2.4-3.1 > Arch: x86_64 > Vendor: http://packman.links2linux.de > Installed: Yes > Status: up-to-date > Installed Size: 528.3 KiB > Summary: VLC: VideoLAN Client - Codec extension > Description: > This Package enhances the functionality of the VLC VideoLAN Client with > Codecs that are not available in a stock openSUSE distribution. > > mplayer plays WMV files fine, but I do like to have a GUI like VLC. > Can I get WMV codecs for VLC somehow? Or should I just switch to > something mplayer-based, like smplayer? > > -- > Yours, Mikhail Ramendik > > Unless explicitly stated, all opinions in my mail are my own and do > not reflect the views of any organization > -- > To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org > To contact the owner, e-mail: opensuse+owner(a)opensuse.org > > > > -----Ursprüngliche Nachricht Ende----- Do you have VLC codec package and avi-codec packages from Packman installed? VLC codec is NOT automatically selected, in my experience you have to select it manually. --- Mail & Cloud Made in Germany mit 3 GB Speicher! https://email.freenet.de/mail/Uebersicht?epid=e9900000450 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 5