November 2015 - openSUSE Users - openSUSE Mailing Lists

[opensuse] rpmbuild OK, rpm -Uvh fails lib dependency despite being present??
by David C. Rankin 17 Nov '15

17 Nov '15

All, I was updating gebc for 13.1 from my 11.4 srpm. I installed libharu from source (rather than making an rpm for it). The install is in /usr/local/lib64. I've updated ldconfig. The gebc build goes fine, but then refuses to install: Provides: gebc = 1.07-1.0 gebc(x86-64) = 1.07-1.0 Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1 Requires: libc.so.6()(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.3.4)(64bit) libc.so.6(GLIBC_2.4)(64bit) libfltk.so.1.3()(64bit) libfltk_images.so.1.3()(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libhpdf-2.4.0dev.so()(64bit) libjpeg.so.62()(64bit) libm.so.6()(64bit) libm.so.6(GLIBC_2.2.5)(64bit) libpng16.so.16()(64bit) libstdc++.so.6()(64bit) libstdc++.so.6(CXXABI_1.3)(64bit) libstdc++.so.6(GLIBCXX_3.4)(64bit) libz.so.1()(64bit) Checking for unpackaged file(s): /usr/lib/rpm/check-files /home/david/rpmbuild/BUILDROOT/gebc-1.07-1.0.x86_64 Wrote: /home/david/rpmbuild/RPMS/x86_64/gebc-1.07-1.0.x86_64.rpm Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.QzVWJo + umask 022 + cd /home/david/rpmbuild/BUILD + cd gebc-1.07 + rm -rf /home/david/rpmbuild/BUILDROOT/gebc-1.07-1.0.x86_64 + rm -rf filelists Executing(--clean): /bin/sh -e /var/tmp/rpm-tmp.HnKSLp + umask 022 + cd /home/david/rpmbuild/BUILD + rm -rf gebc-1.07 + rm -rf filelists 01:03 alchemy:~/.../rpm/gebc/rpm> sudo rpm -Uvh /home/david/rpmbuild/RPMS/x86_64/gebc-1.07-1.0.x86_64.rpm error: Failed dependencies: libhpdf-2.4.0dev.so()(64bit) is needed by gebc-1.07-1.0.x86_64 Huh? What am I missing? I shouldn't have to set rpath with the lib in /usr/local/lib64. /etc/ld.so.conf includes /usr/local/lib64. Any idea why the install isn't finding the lib? (it's there...) -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 7

Re: [opensuse] rpmbuild OK, rpm -Uvh fails lib dependency despite being present??
by David C. Rankin 17 Nov '15

17 Nov '15

On 11/15/2015 07:30 AM, Carlos E. R. wrote: > I do :-) > > > 'str'? Typo, or something I do not know? still recall -- if my guesser is on target tonight... -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] 13.2 to 42 howto upgrade
by buhorojo 16 Nov '15

16 Nov '15

Hi In the past we changed the repository links, e.g. from 13.1 to 13.2 and ran zypper dup It was easy because only the number changed. Can we use the same method with a new name, leap? Is leap a new idea and we have to start over? Thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 21

[opensuse] Leap42: how to get the task bar & desktop back?
by Per Jessen 16 Nov '15

16 Nov '15

On my test desktop, the taskbar (bottom of the screen) disappeared as did the desktop. I minimized the current windows, and ended up with a black screen. I restarted X with crlt-alt-backspace, but that's a bit crude - how would I normally get e.g. the taskbar and startmenu back? -- Per Jessen, Zürich (13.7°C) http://www.hostsuisse.com/ - dedicated server rental in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 3

RE: Re: Re: [opensuse] Installation problems
by stakanov＠freenet.de 16 Nov '15

16 Nov '15

> -----Ursprüngliche Nachricht----- rter of 2017 you will get offical > security updates for 13.2. So 13.2 is the > better choice AFAIK. > > Evergreen will extend the supported lifetime of 13.1 for another year > > href="https://en.opensuse.org/openSUSE:Evergreen#Supported_distributions" > target="_blank">https://en.opensuse.org/openSUSE:Evergreen#Supported_distributions > -- > To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org > To contact the owner, e-mail: opensuse+owner(a)opensuse.org > > > > -----Ursprüngliche Nachricht Ende----- Thank your for that clarification. It does IMO not clearly come through on that page. Maybe the respective text should be slightly amended? Just to make sure people have clear ideas. Greets. --- Alle Postfächer an einem Ort. Jetzt wechseln und E-Mail-Adresse mitnehmen! http://email.freenet.de/basic/Informationen -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] sort by installed packages in YaST ncurses mode
by gumb 16 Nov '15

16 Nov '15

When using YaST Software Management in ncurses mode, I can select Filter to list packages by repository, such as everything in Packman. Is there a way to then sort the enormous package list so that those already installed are grouped at the top, the same as I can do in YaST running with a full GUI? gumb -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Installation problems
by Marc Chamberlin 16 Nov '15

16 Nov '15

"Houston we have a problem!" - I downloaded the ISO for the i586 version of Tumbleweed and the installation failed due to missing image files. I checked the installation DVD and sure enough, the image files were all labeled for x64 versions. Why? That obviously was not what the image installation scripts were looking for since I got a complaint, loud and clear, that the image files it was looking for were not to be found on the DVD! Why isn't there an i586 version of Leap 42.1? All I get when following the links for installing Leap is for x64 versions and I need to download an OpenSuSE OS for an older system with x32 bit architecture? Why are there no links from the main openSuSE home page for finding and downloading earlier versions of OpenSuSE? 13.2, 13.1 etc? I had to spend quite a bit of time searching the internet before locating the repositories! Shouldn't this be easier for users to discover? OpenSuSE used to give out links to older releases from their main download web pages, why has this practice been discontinued? I encountered a display problem during the installation process which resulted in my screen becoming garbage and unreadable. After many hours of Google searches I discovered that there is a magic option - nomodeset which prevents the installation scripts from trying to reset the video card display settings. Why isn't this option presented as one of the kernel (or perhaps as some other) option that can be set from the installation setup screen by simply checking it? Having such hidden parameters makes it very difficult for users to find a solution to their installation problems, or even to simply to remember that such parameters exist! GUI's should act as a guide to help users find a solution to problems, not create them! IMHO of course.... Marc.... -- "The Truth is out there" - Spooky -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 6

[opensuse] on leap 42.1: aaa_base and _extras version 13.2?
by cagsm 16 Nov '15

16 Nov '15

is this really supposed to be the version numbers and packages that are gonna be applied to a leap system? zypper lu Loading repository data... Reading installed packages... S | Repository | Name | Current Version | Available Version | Arch --+-----------------+-----------------------------+------------------------------+------------------------------+------- v | 42.1-update-oss | aaa_base | 13.2+git20140911.61c1681-4.6 | 13.2+git20140911.61c1681-7.1 | x86_64 v | 42.1-update-oss | aaa_base-extras | 13.2+git20140911.61c1681-4.6 | 13.2+git20140911.61c1681-7.1 | x86_64 Linux linux 4.1.12-1-default #1 SMP PREEMPT Thu Oct 29 06:43:42 UTC 2015 (e24bad1) x86_64 x86_64 x86_64 GNU/Linux cat /etc/os-release NAME="openSUSE Leap" VERSION="42.1" VERSION_ID="42.1" PRETTY_NAME="openSUSE Leap 42.1 (x86_64)" ID=opensuse ANSI_COLOR="0;32" CPE_NAME="cpe:/o:opensuse:opensuse:42.1" BUG_REPORT_URL="https://bugs.opensuse.org" HOME_URL="https://opensuse.org/" ID_LIKE="suse" rpm -q aaa_base aaa_base-13.2+git20140911.61c1681-4.6.x86_64 rpm -qi aaa_base Name : aaa_base Version : 13.2+git20140911.61c1681 Release : 4.6 Architecture: x86_64 Install Date: Wed Nov 4 22:43:21 2015 Group : System/Fhs Size : 266152 License : GPL-2.0+ Signature : RSA/SHA256, Sun Oct 25 08:57:43 2015, Key ID b88b2fd43dbdc284 Source RPM : aaa_base-13.2+git20140911.61c1681-4.6.src.rpm Build Date : Sun Oct 25 08:57:35 2015 Build Host : build71 Relocations : (not relocatable) Packager : http://bugs.opensuse.org Vendor : openSUSE URL : https://github.com/openSUSE/aaa_base Summary : openSUSE Base Package Description : This package installs several important configuration files and central scripts. Distribution: openSUSE Leap 42.1 zypper lr -d # | Alias | Name | Enabled | GPG Check | Refresh | Priority | Type | URI | Service --+-----------------+-----------------+---------+-----------+---------+----------+--------+---------------------------------------------------------------+-------- 1 | 42.1-oss | 42.1-oss | Yes | (r ) Yes | No | 99 | yast2 | http://download.opensuse.org/distribution/leap/42.1/repo/oss/ | 2 | 42.1-update-oss | 42.1-update-oss | Yes | (r ) Yes | No | 99 | rpm-md | http://download.opensuse.org/update/leap/42.1/oss/ | -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Problem with zypper update to Leap
by Jon Trygve Utne 15 Nov '15

15 Nov '15

Greetings, fellow OpenSUSE users! :-) I've been running 13.1 up until now, and have tried to upgrade to Leap, by following the recipee at https://en.opensuse.org/SDB:System_upgrade to the letter. The first step of upgrading to 13.2 worked perfectly. No issues at all. But when doing the same process all over to get from 13.2 to 42.1, I get this message when trying to zypper dup: # zypper dup --download in-advance Warning: You are about to do a distribution upgrade with all enabled repositories. Make sure these repositories are compatible before you continue. See 'man zypper' for more information about this command. Loading repository data... Reading installed packages... Computing distribution upgrade... 69 Problems: Problem: nothing provides PackageKit = 1.0.7 needed by PackageKit-branding-openSUSE-42.1-1.1.noarch Problem: nothing provides perl = 5.18.2 needed by apparmor-utils-2.10-3.2.noarch Problem: nothing provides apper = 0.9.2 needed by apper-lang-0.9.2-2.4.noarch Problem: nothing provides yast2-storage >= 3.1.59 needed by autoyast2-installation-3.1.100-1.1.noarch Problem: nothing provides libgio-2_0-0 = 2.44.1 needed by gio-branding-openSUSE-42.1-2.1.noarch Problem: nothing provides glib-networking = 2.44.0 needed by glib-networking-lang-2.44.0-2.4.noarch Problem: nothing provides grub2 = 2.02~beta2-68.2 needed by grub2-snapper-plugin-2.02~beta2-68.2.noarch Problem: nothing provides gstreamer = 1.4.5 needed by gstreamer-lang-1.4.5-2.2.noarch Problem: nothing provides gtk2-theming-engine-adwaita = 3.16.2 needed by gtk2-metatheme-adwaita-3.16.2-2.2.noarch Problem: nothing provides libgtk-3-0 = 3.16.7 needed by gtk3-branding-openSUSE-42.1-1.1.noarch Problem: nothing provides k3b = 2.0.3 needed by k3b-lang-2.0.3-3.2.noarch Problem: nothing provides kipi-plugins = 4.13.0 needed by kipi-plugins-lang-4.13.0-2.3.noarch Problem: nothing provides konversation = 1.6 needed by konversation-lang-1.6-2.9.noarch Problem: nothing provides libreoffice = 5.0.2.2 needed by libreoffice-l10n-en-5.0.2.2-1.2.noarch Problem: nothing provides libreoffice = 5.0.2.2 needed by libreoffice-l10n-nb-5.0.2.2-1.2.noarch Problem: nothing provides marble = 15.08.1 needed by marble-data-15.08.1-1.2.noarch Problem: nothing provides marble = 15.08.1 needed by marble-doc-15.08.1-1.2.noarch Problem: nothing provides mc = 4.8.14 needed by mc-lang-4.8.14-3.8.noarch Problem: nothing provides nano = 2.4.2 needed by nano-lang-2.4.2-4.2.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-Archive-Zip-1.53-1.1.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-Config-Crontab-1.33-3.2.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-Data-Dump-1.22-5.1.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-Digest-HMAC-1.03-20.1.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-Encode-Locale-1.03-9.1.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-File-Listing-6.04-9.1.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-HTML-Tagset-3.20-73.1.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-HTTP-Cookies-6.01-9.1.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-HTTP-Daemon-6.01-9.1.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-HTTP-Date-6.02-9.1.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-HTTP-Message-6.06-5.1.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-HTTP-Negotiate-6.01-9.1.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-IO-HTML-1.00-5.1.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-IO-Socket-SSL-1.962-4.1.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-Image-ExifTool-10.00-6.2.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-LWP-MediaTypes-6.02-9.1.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-LWP-Protocol-https-6.04-7.1.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-MLDBM-2.05-7.2.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-Net-Daemon-0.48-15.2.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-Net-HTTP-6.06-3.2.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-Net-SNMP-6.0.1-20.1.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-RPC-XML-0.77-6.4.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-SQL-Statement-1.405-5.1.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-Test-Manifest-2.02-3.2.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-Text-Wrapper-1.04-3.2.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-Tie-IxHash-1.23-5.1.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-TimeDate-1.20-26.1.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-URI-1.60-9.1.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-WWW-RobotRules-6.02-9.1.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-XML-SAX-Base-1.08-10.1.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-XML-SAX-Expat-0.50-3.2.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-XML-Simple-2.20-6.1.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-XML-Twig-3.44-3.2.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-XML-Writer-0.623-3.2.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-XML-XPathEngine-0.14-5.1.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-libwww-perl-6.05-5.1.noarch Problem: nothing provides snapper = 0.2.9 needed by snapper-zypp-plugin-0.2.9-1.2.noarch Problem: nothing provides subversion = 1.8.10 needed by subversion-bash-completion-1.8.10-3.3.noarch Problem: nothing provides system-config-printer = 1.5.7 needed by system-config-printer-applet-1.5.7-3.6.noarch Problem: nothing provides dbus-1-python3 needed by system-config-printer-common-1.5.7-3.6.noarch Problem: nothing provides vlc-noX = 2.2.1 needed by vlc-noX-lang-2.2.1-11.5.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by yast2-apparmor-3.1.3-5.2.noarch Problem: nothing provides yast2 >= 3.1.126 needed by yast2-installation-3.1.161-1.1.noarch Problem: nothing provides dbus-1-python3 needed by system-config-printer-common-1.5.7-3.6.noarch Problem: nothing provides perl(:MODULE_COMPAT_5.18.2) needed by perl-Image-ExifTool-10.00-6.2.noarch Problem: nothing provides gtk2-theming-engine-adwaita = 3.16.2 needed by gtk2-metatheme-adwaita-3.16.2-2.2.noarch Problem: kdebase4-workspace-branding-openSUSE-13.2-4.2.8.i586 requires ksplashx-branding-openSUSE = 13.2, but this requirement cannot be provided Problem: kdebase4-workspace-branding-openSUSE-13.2-4.2.8.i586 requires susegreeter-branding-openSUSE = 13.2, but this requirement cannot be provided Problem: libnl3-200-3.2.25-2.1.2.i586 requires libnl-config >= 3.2.25, but this requirement cannot be provided Problem: gtk3-tools-3.14.15-21.1.i586 requires libgtk-3.so.0, but this requirement cannot be provided Problem: nothing provides PackageKit = 1.0.7 needed by PackageKit-branding-openSUSE-42.1-1.1.noarch Solution 1: keep obsolete PackageKit-branding-openSUSE-13.2-2.7.1.noarch Solution 2: break PackageKit-branding-openSUSE-42.1-1.1.noarch by ignoring some of its dependencies Choose from above solutions by number or skip, retry or cancel [1/2/s/r/c] (c): What should I do now? Is there something I've missed? Here is my repo list: # zypper repos --uri # | Alias | Name | Enabled | GPG Check | Refresh | URI --+---------------------------+-----------------------------------------+---------+-----------+---------+-------------------------------------------------------------------------- 1 | openSUSE-leap/42.1-1.10 | openSUSE-leap/42.1-1.10 | No | ---- | No | cd:///?devices=/dev/disk/by-id/ata-hp_DVD_A_DS8A8SH_6D7205040566,/dev/sr0 2 | repo-debug | openSUSE-leap/42.1-Debug | No | ---- | Yes | http://download.opensuse.org/debug/distribution/leap/42.1/repo/oss/ 3 | repo-debug-update | openSUSE-leap/42.1-Update-Debug | No | ---- | Yes | http://download.opensuse.org/debug/update/leap/42.1/ 4 | repo-debug-update-non-oss | openSUSE-leap/42.1-Update-Debug-Non-Oss | No | ---- | Yes | http://download.opensuse.org/debug/update/leap/42.1-non-oss/ 5 | repo-non-oss | openSUSE-leap/42.1-Non-Oss | Yes | (r ) Yes | Yes | http://download.opensuse.org/distribution/leap/42.1/repo/non-oss/suse 6 | repo-oss | openSUSE-leap/42.1-Oss | Yes | (r ) Yes | Yes | http://download.opensuse.org/distribution/leap/42.1/repo/oss/suse 7 | repo-source | openSUSE-leap/42.1-Source | No | ---- | Yes | http://download.opensuse.org/source/distribution/leap/42.1/repo/oss/ 8 | repo-update | openSUSE-leap/42.1-Update | Yes | (r ) Yes | Yes | http://download.opensuse.org/update/leap/42.1/oss 9 | repo-update-non-oss | openSUSE-leap/42.1-Update-Non-Oss | Yes | (r ) Yes | Yes | http://download.opensuse.org/update/leap/42.1/non-oss/ Any help would be very much appreciated. Apologies for any formatting problems! Many thanks in advance for your kind help! ---J.T.U. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Leap42 - do Firefox and Thunderbird not share certificates?
by Per Jessen 15 Nov '15

15 Nov '15

This is probably not Leap specific, but I thought at least Firefox and Thunderbird would be sharing certificates? (I'm guessing Chrome and Opera will certainly have their own, separate certificate storage) On Leap, I installed a new root certificate from Firefox. I expected Thunderbird to pick this up too, but it didn't. Am I expecting too much? I'm guessing systemwide root certificate are in /usr/share/pki/trust, what would be the right place for adding systemwide, local certificates? -- Per Jessen, Zürich (10.2°C) http://www.hostsuisse.com/ - virtual servers, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 4