July 2013 - openSUSE Users - openSUSE Mailing Lists

[opensuse] adding drivers for a wireless printer?
by Greg Freemyer 29 Jul '13

29 Jul '13

All, I just bought a Canon Pixma mx922 printer. It is working fine from windows. Canon is not showing any linux drivers for it. Looking at the HCL <https://en.opensuse.org/HCL:Printers> I don't see any Canon mx series printers. At least during the install time I can hook-up the USB cable, but to be useful I need to get it working via wireless. Am I whistling dixie. (ie. am I wasting my time?) Greg -- Greg Freemyer -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Machine spec for 3d art
by Dylan 29 Jul '13

29 Jul '13

Hi All, I'm helping a friend replace his old Windows Vista machine which died in the heatwave. He does a lot of 3d art with blender (which has been terminally slow under vista.) I've provided a temporary Linux box (actually my testbed machine: AMD Athlon 64 X2 4400+ with 2G ram, which is already faster than his old quad core with 4G) and I'm hoping that by the time he gets a new machine he won't want Windows on it... The 3d art is a hobby and the budget is limited. I'll be using his existing graphics card and 'on-board' sound will be more than adequate. So, which aspects of the spec are likely to have the most impact? I'm assuming more cores and more memory, but which would have the most impact for cost? Is there an appreciable difference between AMD and Intel chips? Are there any other aspects of the motherboard that might have a bearing on rendering speeds? Any and all comments welcome. Dylan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 6

Re: [opensuse] Can't switch to new desktop - OpenSUSE 12.3 & KDE.
by James Knott 29 Jul '13

29 Jul '13

John Andersen wrote: > In my installation, I get what you call the Desktop Sessions box, where you can select > from other sessions (if any). You can key in an already launched session, or select > from a list, or click the Nes Session button (which is green on my setup). > > Clicking that green button gives and explanation screen, which you can suppress after > the first time, and from which you can key in a new user name. I see that New Sessions button on the first time after I reboot. After that, I don't see it. Even when I had it, I wasn't able to start a new desktop. I'd just get a screen that says my desktop was locked etc. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Can't switch to new desktop - OpenSUSE 12.3 & KDE.
by James Knott 29 Jul '13

29 Jul '13

I've noticed that I can no longer open additional desktops. When I click on Leave> Switch User on the menu, a "Desktop Sessions" box opens, but there's no way to open another desktop. This is a fairly recent change, but I have no idea exactly when. Any ideas on this? tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Sane driver for Reflecta ProScan 7200?
by MarkusGMX 29 Jul '13

29 Jul '13

Hello, I tried to find a sane driver for my Reflecta ProScan 7200. There seems to be none, at least according to most of the websites like http://www.sane-project.org/cgi-bin/driver.pl?manu=Reflecta&model=&bus=any&… Vuescan is available for Linux but not of much help if the drivers are not there. I also have the impression, that such scanners and sane are not developed since 2010 although https://docs.google.com/viewer?a=v&pid=sites&srcid=ZGVmYXVsdGRvbWFpbnxzYW5l… sounded quite interesting. :-( Do I really have to switch on my Windows machine for that? :-( Best regards and thanks ME -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] Ubuntu Forum hacked
by Basil Chupin 29 Jul '13

29 Jul '13

The Ubuntu Forum was hacked a couple of days ago- http://ubuntuforums.org/announce.html which led to a discussion about how secure Linux actually is. A question arises in my mind is: how vulnerable are our mailing lists/forum(s) seeing as how openSUSE MLs are also using vBulletin (an earlier version than the Ubuntu one, BTW). More discussion led to this URL- http://www.ubuntu.com/usn/ With regards to this last URL, how does openSUSE fair? I just looked at the archive for opensuse-security mail list (and subscribed to it) but for the month of July only see some fixes to what appear to be apps from 'third parties'. Is openSUSE 'watertight'? :-) BC -- Using openSUSE 12.3, KDE 4.11.0 & kernel 3.10.1-3 on a system with- AMD FX 8-core 3.6/4.2GHz processor 16GB PC14900/1866MHz Quad Channel Corsair "Vengeance" RAM Gigabyte AMD3+ m/board; Gigabyte nVidia GTX550Ti 1GB DDR5 GPU -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

10 29

[opensuse] opensuse yast mail config and ldap search for virtual users fail
by Andrew Colvin 29 Jul '13

29 Jul '13

Over the last weekend all of my email to my domains started to bounce. I have a set up that was created and I manage through the yast2 advance mail config. I use LDAP GSS Cyrus Postfix and Fetchmail and I hadnt made any changes since before the upgrade to 12.2 (still not at 12.3 as I have to summon up a lot of courage to upgrade my server - I am such a coward) The error I was receiving in the postfix log was status=bouncedstatus=bounced (User unknown in virtual alias table) Note I say was as I have now "fixed" it and this is for information. I tracked the issue down to the /etc/postfix/ldapuser_recipient_maps.cf file This has the following ldap search to map a virtual user to the mbox to deliver the message to: query_filter=(&(objectClass=suseMailRecipient)(suseMailAcceptAddress=%s)(! (mailEnabled=no))(|(!(suseDeliveryToFolder=no))(suseMailForwardAddress=*))) This looks inocculous and I was scratching my head until I discovered that my openldap database (which was originally created back in 11.4 if my memory servers me correct) does not have the attribute "mailEnabled" aginst any of my users. However because the query string doesnt test for the existence then this query succeeds but returns no results and hence no mail box. I therefore amended the query string (only first part) to remove the mailEnabled test. This has however removed my ability to disable an mbox - not a facility I use. I am a little concerned that each time I go into yast config it will overwrite this so does anyone know if there has been a schema update that I have missed and which schema this attribute is in? I'm not sure I should raise a bug as this is likely been caused due to my having missed a schema update Andrew -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 5

[opensuse] dependencies and tarballs
by lynn 28 Jul '13

28 Jul '13

Hi everyone I have the obs NETWORK:samba repo I want samba-client 4.0.7 from the rpm and my own cifs-utils from source. I can't remove samba-client without also removing cifs-utils. Currently, I take what it gives me and then make install the cifs-utils over the top of what's already there. I need to debug some bits which don't work. I don't want to have to install the whole of 4.0.7. Is there a way to remove the dependency and do this neatly? Thanks, L x -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] Expand user's encrypted home image file
by Marco Vittorini Orgeas 28 Jul '13

28 Jul '13

Hello list! During the initial setup of my openSUSE installation (12.2) I made sure that my home folder was encrypted by checking the correspondent option. So my home folder end up managed by openSUSE which created and set-up an encrypted image file accordingly to the details here: http://doc.opensuse.org/documentation/html/openSUSE_122/opensuse-security/c…. security.cryptofs.html#sec.security.cryptofs.y2.homes . I have an home folder (image file) of fixed-size which I now need to enlarge as its free space its almost entirely depleted. But before proceeding with the enlargement, using Yast as described here http://doc.opensuse.org/documentation/html/openSUSE_122/opensuse-startup/cha. y2.userman.html#sec.y2.userman.adv.crypto , I'd like to know if somebody already had experience with similar issue and above all if somebody knows the details of how Yast will handle the request to enlarge the image file. Is a well know scenario in the openSUSE community with the procedure known as bug free? Gave the situation I'm worrying about how it will re-size the file to accommodate the new size? I guess by creating a new image file with the new size encrypted with the same key, and then copying all the "old" image file contents, eventually deleting the "old" one at the end? If that would be the case,given than my home is quite big, it will probably fail as the HDD will not have space required to handle the copy of the file. Any information with analogues experiences about the procedure is greatly appreciated. Thank you. -- Marco -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 11

[opensuse] parcellite does not work
by C. Brouerius van Nidek 28 Jul '13

28 Jul '13

Until last week I had parcellite (clipboard manager) 0n my desktop in my panel just next to the calender. After an update zypper dup on this tumbleweed system I cannot get parcelite any more. In konsole I get three times: ** (parcellite:5088): WARNING** : Binding '' failed! How can I get back parcellite? -- Linux User 183145 using KDE4 and LXDE on a Pentium IV , powered by openSUSE 12.3 (i586) Kernel: 3.10.2-18.g49a8c47-default KDE Development Platform: 4.10.5 "release 1" 18:36pm up 1:46, 3 users, load average: 0.88, 0.57, 0.61 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0